Velleman PI60024 User Manual - page 7
PI600M & PI60024 v2 GB
6
13. MAINTENANCE
Very little maintenance is required to keep your inverter operating smoothly.
Clean the exterior of the device periodically using a damp cloth in order to prevent
the accumulation of dust and dirt. Tighten the screws on the DC input terminals
whenever you are cleaning the device.
14. SPECIFICATIONS
•
DC input voltage : 12V / 24V, refer to model label !!!
•
AC output voltage : 230V
•
Output frequency : 50Hz
•
Continuous output power : 600W
•
Output waveform : modified sinewave
•
No load current : < 1A
•
Battery low alarm & shutdown : 10.5
±
0.5VDC for a 12V input
21
±
1VDC for a 24V input
•
Input current at 100% load : 64A for a 12V inverter, 32A for a 24V inverter
•
Output current at 100% load : 2.6A
•
Overheating protection : 55
±
5°C
•
Dimensions : 205 x 73 x 290mm
•
Weight : 2.1kg
15. NOTE
All specifications are typical at nominal input voltage, 50% load and 25°C unless
otherwise noted. All specifications are subject to change without prior notice.
WARNING : DO NOT DISASSEMBLE THIS UNIT AS DOING SO MAY CAUSE
HAZARDOUS VOLTAGES !! RETURN THIS UNIT TO THE DEALER IN CASE
OF TROUBLE !!
IMPORTANT : DO NOT CONNECT ANY INDUCTIVE LOADS WITH THIS
DEVICE !