Velleman SHE6N User Manual - page 8

SHE6N VELLEMAN 

8

13. Hazard Alarm 

This alarm will sound when your current heart reaches 99% of your MHR. 

14. Auto Timer 

The timer is activated automatically whenever the pulse signal is received. It keeps 

track of the total exercise time as long as you are wearing the belt and switch to 

pulse mode. 

15. Three Audible Alarm Sounds 

Select the PULSE mode with button A. Select alarm ON or OFF with B (the 

symbol is displayed when the alarm is ON). 

The device emits: -  1 beep per second when the current heart rate descends 

below the LOWER limit. 

-  2 beeps per second when the current heart rate exceeds the 

UPPER limit. 

-  4 beeps per second when the current heart rate is at least 

99% of your MHR. 

16. Alarm Activation 

Use button C to select the target zone for the alarm:   or 

. 

Select   if you wish the alarm to be activated when your heart rate exceeds the 

upper or drops below the lower limit. 

Select 

 if you wish the alarm to be activated only when your heart rate exceeds 

the upper limit. 

17. Target Zone Recall 

Hold button C until the target zone is displayed (upper and lower limit). 

18. Auto Timer Reset 

When no signal is received for 5 minutes while the device is in the pulse mode, the 

SHE6N will automatically return to the clock display mode. The recorded exercise 

time will be reset.