Velleman VT-SSD User Manual - page 8
Manual is about: SOLDERING-/DESOLDERING STATION
of
9
VT-SSD GB
7
12. Replacement of Filters
a. FILTER OF THE SOLDER COLLECTOR (DESOLFILT)
1. Make sure that the iron and the filter have cooled sufficiently.
2. Point the soldering iron slightly upwards while pressing and turning the red switch on the butt
of the iron.
3. Remove the solder collector (fig.9).
4. Disassemble the solder collector (fig. 13 & 14).
5. Remove the old filter and replace it with a new one (fig. 15 & 16).
b. IN-LINE FILTERS
1. Unscrew the in-line filters and pull the two pieces apart (fig. 17 & 18).
FIG. 11
FIG. 12
FIG. 13
FIG. 14
FIG. 15
FIG. 16
FIG. 17