Velleman VTSSC60 User Manual - page 6
VTSSC60
Rev. 01
03/02/2010
©Velleman
®
nv
6
10.
Maintenance
• Disconnect the device from the mains prior to maintenance activities.
• Wipe the device regularly with a damp, lint-free cloth. Do not use alcohol or solvents.
• Never clean the tip with sand paper, file or any abrasive solution.
• Contact your dealer for spare parts if necessary.
11.
Troubleshooting
no temperature reading
• temperature is out of measuring range
• soldering iron is not connected properly – check connection
• soldering iron is defective – contact your local dealer
soldering iron doesn’t work or strange characters on the display
• soldering station is not switched on – check power switch
• power plug not inserted (correctly) into the mains – check connection
• fuse is blown – replace fuse
• processor problem – restart the station
12.
Technical specifications
max. heater power for soldering iron
60W
temperature range
150 - 450°C (±15°C)
low-voltage iron
24V AC
power supply
230V AC / 50Hz
weight 1.9kg
dimensions
167 x 138 x 92mm (without stand and iron)
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use of this
device.
For For more info concerning this product and the latest version of this user
manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv. All worldwide
rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any
electronic medium or otherwise without the prior written consent of the copyright holder.