Assembly veloretti manual.
So, you got a brand new veloretti? Timeless design since 2013.
Contents happy cycling! Congratulations on your purchase of an original veloretti! In the box what is in there? Unboxing time to unbox your veloretti! Assembly assembling your veloretti in 4,5 easy steps before you hit the road... One last check before you hit the streets! Maintenance take care of y...
In the box you can find all your sepa- rately ordered accessoires and the tools you need to complete the last 15% of your veloretti in this box as well. Use this checklist to check if your full order is delivered in the box. *brooks accessoires are delivered in a separate box. The box contains your ...
Step 1 kickstand start with the assembly of the kickstand so you can put your veloretti endwise while you conti- nue with the assembly of your bike. Use allen key number 8 to tighten the kickstand. Stap 2 front fender install the frond fender onto the front fork of your bike and use the brackets to ...
Optional front carrier you can easily mount the front carrier onto the front wheel. Loosen the screws fi rst (step 2,5) to mount the front carrier. Make sure that the steel safetypin stays at its place before you tighten the screw. The top side of the front carrier is mounted to the stem of the bike...
Maintenance cleaning securing bolts lubricating your bike your bike is a collection of moving parts. When these parts come into contact with mud, grime and debris, wear and tear is inevitable. This speeds up the deterioration of your bike’s components. Not supri- singly, your first line of defence a...
© veloretti 2013.
