Veloteq CF-2104 User Manual - page 11
11
2、Windows display
3、Procedure Instruction
3.1、Normal procedure (P1)
Insert safety key first, turn on power , windows will be in light and with one long
"BEEP", windows display all the numbers is initial value 0, it's the normal mode.
Press START key: after 3 seconds countdown with 3 "BEEP", motor start to work, start
with initial speed 1KM/H.
Press FAST/SLOW key: when treadmill running, it adjust the speed.
Press UP/DOWN key: when treadmills start, adjust the incline.
Press 2、4、6、8、10、12、14KM/H key: when treadmill is working, adjust the speed as
the set value show.
Press 0%、4%、6%、8%、10% 、12%、14% key:when treadmill is working, adjust the
incline as set value show
Press STOP key::motor stop slowly, wait motor to stop(the original value remain)
3.2、Target Mode(In standby mode operate P2-P6)
Only in standby mode can set this mode;
SELECT Key:In regular turn can set time、distance、calorie,the window blink when the
mode set.
1) 、Time Set
Press FAST/SLOW Key:Default time 30 minutes,can adjust time(5:00-99:00);
Press START Key:Work mode start(start after 3 seconds countdown);
2)
、Distance Set
SPEED window:display speed;
INCLINE window: display incline
TIME window:display time;
DISTANCE window:display distance;
PULSE window:display heart rate;
CALORIE window:display calorie;
PROGRAM window:display program