1. DL manuals
  2. Velux
  3. Remote Control
  4. KLR 100
  5. User Manual

Velux KLR 100 User Manual

Manual is about: VSE/VCE

Summary of KLR 100

  • Page 1

    Vas 452672-2011-06 vse/vce klr 100 user manual english.

  • Page 2: Getting Started

    Velux 2 important information / warnings 4-6 getting started initial set-up 8-9 remote control functions 10-11 operation locating and operating a product 12-14 - one skylight 12 - more than one skylight 13-14 choosing positions 15 closing the skylight automatically 16 disabling rain sensor 17 menu f...

  • Page 3: Extending The System

    Velux 3 display 52-53 - display light 52 - sleep mode 53 keypad lock 54 access code 55 software version 56 clearing remote control settings 57 extending the system registering new products 58-59 using additional activation controls 61-65 - copying to a new remote control 62-63 - copying to a remote ...

  • Page 4: Safety

    Velux 4 please keep instructions for future reference and hand them over to any new user. Safety • before operating ensure that the skylight with electrical products can be operated without risk of damage to property or injury to people or animals. • for personal safety, never have head, hand, arm o...

  • Page 5: Function

    Velux 5 • this device has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This device generates, uses and can r...

  • Page 6: Product

    Velux 6 important information / warnings product • this product has been designed for use with genuine velux products. Connection to or use with other products may cause damage, malfunc- tion or injury. • electrical products must be disposed of in conformity with all local codes, ordinances, rules a...

  • Page 7

    Velux 7.

  • Page 8: Initial Set-Up

    8 velux p1 p2 enter eesti english español français language a b initial set-up products to be operated with the remote control must be registered in the remote control. Registration, however, depends on whether the remote control is new or whether it is already used for operating other products. 1 •...

  • Page 9: Note:

    Velux 9 completed menu no. 1 window locate register back p1 p2 prepare products for registration and press register within 10 minutes auto set-up auto set-up auto set-up house p1 p2 5 press "register" to start registration. 6 registration is running. This can take up to two minutes. 7 the display sh...

  • Page 10: Remote Control Functions

    Velux 10 velux 10 menu no. 1 window locate house remote control functions the display indicates which product is being oper- ated, which menu function is being used etc. The top line of the display states the chosen area. Prod- ucts are as default shown under the area house. The bottom line of the d...

  • Page 11: Remote Control Functions

    Velux 11 p1 p2 p1 menu no. 1 window locate p1 p2 p2 house remote control functions selection keys - for activating the menu and confirming the chosen menu function. - for locating the room, the group, the zone or the prod- uct to be operated. The current function of the individual selection key is s...

  • Page 12: One Skylight

    12 velux menu no. 1 window locate menu no. 1 blind locate p1 p2 house house to be able to operate a product (eg a roller shade), you first have to locate the product in question in the display. The examples show the easiest way to find the product you want to operate . One skylight with one electric...

  • Page 13: More Than One Skylight

    Velux 13 menu no. 2 window locate p1 p2 house 3 1 2 locating and operating a product more than one skylight with one electrical product three skylights are equipped with skylight operators only. The example shows how to locate and open skylight no. 2. Press to find skylight no. 2 (indicated as "wind...

  • Page 14: More Than One Skylight

    14 velux enter back menu no. 1 window locate window blind enter back p1 p2 p1 p2 no. 1 no. 2 no. 3 no. 4 house house blind 2 3 1 5 4 locating and operating a product more than one skylight with more than one electrical product one skylight is equipped with a skylight operator. In addition, all five ...

  • Page 15: Note:

    Velux 15 menu no. 2 blind locate 50% down house set position a product or a group of products can be set to travel to a certain position. The example shows how to set a roller shade to close by 50%. 1 locate the product in question, see section locating and operating a product. 2 product chosen is d...

  • Page 16: Note:

    16 velux menu no. 1 window closes in 10 min house locate auto close off auto close in: 10 min p1 p2 running menu no. 1 window locate house running closing the skylight automatically when a skylight has been opened with the remote control, you can set it to close again automatically after a certain t...

  • Page 17: Disabling Rain Sensor

    Velux 17 menu no. 1 window locate house p1 p2 yes no disable rain sensor temporarily? Information rain sensor disabled operation not completed. Limited by rain sensor information information disabling rain sensor if the rain sensor gets wet, the skylight operator auto- matically closes the skylight ...

  • Page 18: Menu Guide

    Velux 18 velux 18 menu no. 1 window house locate enter back enter back room group rearrange order rename clear language display time and date access code keypad lock favourite settings register product copy system security key configure software version enter back enable record delete rename rearran...

  • Page 19

    Velux 19 menu no. 1 window locate p1 p2 house settings room enter back p1 p2 house settings user settings system settings program settings menu no. 1 window locate p1 p2 enter back house p1 p2 room group rearrange order rename menu house settings house navigating through the menus the example shows ...

  • Page 20: Time And Date

    20 velux user settings time and date clock date back enter menu no. 1 window locate house p1 p2 keep edit monday 2011.05.30 9:46 am time and date time and date p1 p2 time and date time and date must be set the first time the remote control is to be used as correct settings are required for remote pr...

  • Page 21

    Velux 21 set clock enter back p1 p2 9: 00 am information enter back saved 11 :00 am set clock enter back p1 p2 11 :00 am set clock set format summer time clock enter back p1 p2 5 press to highlight "set clock". Press "enter" to confirm your choice. 6 press to set minutes. Press "enter" to change to ...

  • Page 22: Changing Language

    22 velux menu no. 1 window locate p1 p2 p1 p2 user settings language enter back dansk english français deutsch p1 p2 enter dansk english français deutsch sauvegardé français back house language language information changing language you can change the display text language. The example shows how to ...

  • Page 23: Room, Group And Zone

    Velux 23 room, group and zone to make it easier to locate and operate the products it is recommended to link each product to a room and/or a group. Products are as default shown under the area house. Definition of room a room consists of one or more products of any type located in the same physical ...

  • Page 24: Creating A Room

    24 velux menu no. 1 window locate enter p1 p2 house settings room create back enter no. 1 no. 2 no. 3 p1 p2 back house rooms are created to make it easier to locate and operate your products. The example shows two rooms with two skylights (indicated as "window" in the remote display) in each. Below ...

  • Page 25: Note:

    Velux 25 room created room created enter back save room undo product undo new room p1 p2 yes no save all remaining products in new room room 1 room 2 more no. 1 p1 p2 continue window house continue information information information 5 displays the product chosen. • press "more" to move additional p...

  • Page 26: Editing A Room

    26 velux enter back window blind menu no. 1 window locate p1 p2 enter back p1 p2 room 1 room 2 room 3 house settings room edit p1 p2 room 1 move from room 1 you can edit the rooms you have created, ie one or more products can be moved from one room to another. The example shows how the skylight oper...

  • Page 27: Note:

    Velux 27 enter back enter back p1 p2 room 1 room 2 room 3 no. 1 no. 2 no. 3 rooms modified p1 p2 window place in information 5 displays a list of the individual products within the product type in question. Press to highlight the product to be moved. The in- dividual products can be identified by pr...

  • Page 28: Creating A Group

    28 velux creating a group menu no. 1 window locate p1 p2 enter back p1 p2 room 1 room 2 room 3 house settings group create enter back p1 p2 window blind room 1 area room 1 to make it easier to locate and operate products of the same type simultaneously, you can create a group. The example shows a ro...

  • Page 29: Note:

    Velux 29 group 1 created in room 1 enter back p1 p2 no. 1 no. 2 no. 3 no. 4 more save p1 p2 add more to group or save group window information information 5 displays a list of the individual products within the product type in question. Press to highlight the product to be included in group 1. The i...

  • Page 30: Naming

    30 velux menu no. 1 window locate p1 p2 enter back p1 p2 enter back p1 p2 room 1 room 2 room 3 house settings rename enter back p1 p2 house room zone group area room 1 rename rename dictionary room 1 ghi jk naming you can change the name of house and the names of the automatically numbered rooms, zo...

  • Page 31: Note:

    Velux 31 name saved enter back p1 p2 enter back p1 p2 save rename dictionary information hall kitchen left living room kitchen fghi j 6 displays a list of pre-defined locations. Press to highlight the relevant location. Press "enter" to confirm your choice. 7 press to highlight the save symbol . Pre...

  • Page 32: Note:

    32 velux user settings favourite settings favourite product select no. 1 no. 2 group 1 p1 p2 back window house favourite product selected information menu no. 1 window locate house you can appoint an area and/or a product or a group of products as your favorite. Typically this will be the area or th...

  • Page 33

    Velux 33 deselect no. 1 no. 2 group 1 p1 p2 back window room 1 favourite product deselected favourite product: house window no. 2 information information edit back menu no. 1 window locate house p1 p2 favourite product user settings favourite settings deselecting your favorite product you can undo y...

  • Page 34: Rearranging Order

    34 velux menu no. 1 window locate p1 p2 p1 p2 enter back room 1 room 2 room 3 p1 p2 enter back window blind rearrange order house settings product area room 1 room 2 you can rearrange the order of the individual products, groups, rooms and zones displayed. In the example, three rooms have been creat...

  • Page 35

    Velux 35 order rearranged p1 p2 enter back no. 1 no. 2 no. 3 p1 p2 enter back no. 1 no. 3 no. 2 p1 p2 save more save new order or rearrange more products? Information information rearrange order rearrange order 5 displays a list of the individual products of the chosen product type. The individual p...

  • Page 36

    36 velux.

  • Page 37: Programs

    Velux 37 programs a program contains a sequence of commands on how and when the products are to be operated. There are two different program types: • my program a personal program that will be activated automatically without using the remote control. For instance you can record a morning program to ...

  • Page 38: My Program

    38 velux menu no. 1 window locate program settings record my program house house room 1 room 2 room 3 enter window venetian blind blind back area product type p1 p2 p1 p2 back enter no. 1 no. 2 no. 3 window house p1 p2 select back my program is an automatically activated program which contains a seq...

  • Page 39

    Velux 39 enter back p1 p2 100% open enter back set position save position p1 p2 set position position enter back set position save position p1 p2 continue no. 1 edit window house p1 p2 position yes no save selected products? P1 p2 information 6 the display shows the selected product. • press "contin...

  • Page 40: My Program

    40 velux continue edit monday p1 p2 set day yes no save selected days? P1 p2 information select back monday tuesday wednesday thursday p1 p2 enter back p1 p2 00: 30 pm enter back p1 p2 6 :30 pm set time set time set day 11 press to set the time for the skylight to be opened. First choose minutes. Pr...

  • Page 41

    Velux 41 enter back p1 p2 save rename p1 p2 enter back save program add functions cancel recording p1 p2 enter edit enter back save program add functions cancel recording p1 p2 save room 1 window save no. 1 ..Bcd my program 1 16 the display shows various options. Press to highlight "add functions" t...

  • Page 42: Starting Date:

    42 velux my program 1 enabled from 2011.01.01 to 2011.12.31 information keep edit p1 p2 time and date monday 2010.12.27 9:46 pm enter edit starting date 2011.01.01 p1 p2 enter edit end date 2011.12.31 p1 p2 set date set date select back p1 p2 enable disable my program 1 20 the display asks whether t...

  • Page 43: Note:

    Velux 43 choose "enable" under menu item program settings to get a full list of all recorded programs that can be activated automatically. The list comprises both enabled and disabled programs. The enabled programs have been ticked and the disabled programs can be enabled any time you want. Note: fo...

  • Page 44: Shortcut P1/p2

    44 velux menu no. 1 window locate record shortcut p1/p2 program settings house select no. 1 no. 2 no. 3 p1 p2 back window room 1 house room 1 room 2 room 3 enter window venetian blind blind back area product type p1 p2 p1 p2 back enter shortcut p1/p2 a program under shortcut p1/p2 contains a sequenc...

  • Page 45

    Velux 45 enter back p1 p2 100% open back set position save position p1 p2 enter set position position continue no. 1 p1 p2 edit window room 1 back set position save position p1 p2 enter position yes no save selected products? P1 p2 information 6 the display shows the selected product. • press "conti...

  • Page 46: Shortcut P1/p2

    46 velux no. 1 p1 p2 continue edit enter back save program add functions cancel recording p1 p2 window room 1 save enter back delay starting time p1 p2 enter back p1 p2 00 h 00 min enter back p1 p2 00 h 00 min time control set delay set delay shortcut p1/p2 11 the display shows two time setting opti...

  • Page 47

    Velux 47 enter back p1 p2 enter back set position save position p1 p2 0% open enter back delay starting time p1 p2 position set position time control yes no save selected products? P1 p2 information enter back set position save position p1 p2 position 16 the display asks whether to save the selected...

  • Page 48: Shortcut P1/p2

    48 velux enter back save program add functions cancel recording p1 p2 enter back p1 p2 enter back p1 p2 00 h 30 min 01 h 30 min set delay set delay save enter back p1 p2 rename save shortcut 1 .Abcd .. 21 press to set the delay. First choose minutes. Press "enter" to change to hours. 22 press to set...

  • Page 49

    Velux 49 shortcut 1 saved to shortcut p1/p2 information keep edit p1 p2 time and date monday 2011.05.30 9:46 pm 25 the display shows that shortcut 1 has been saved. 26 check current time and date settings to ensure accurate operation of the products. The display shows day, date and time. • press "ke...

  • Page 50: Shortcut P1/p2

    50 velux menu no. 1 window locate p1 p2 start back shortcut 1 shortcut 2 shortcut 3 shortcut 4 p1 p2 house program shortcut 3 started information shortcut p1/p2 activating a program under shortcut p1/p2 you can activate any one of the personal shortcut pro- grams by pressing the shortcut key p1 or p...

  • Page 51

    Velux 51 menu no. 1 window locate p1 p2 stop back shortcut 1 shortcut 2 shortcut 3 shortcut 4 p1 p2 house program shortcut 3 stopped information interrupting a program under shortcut p1/p2 icon indicates that a program has been activated. A shortcut program in progress can be interrupted as follows:...

  • Page 52: Display

    52 velux enter back on off menu no. 1 window locate p1 p2 p1 p2 user settings display enter back display light sleep mode display house display light display display light in standard settings, the light in the display is turned on when the keypad is activated and turned off again after 20 seconds. ...

  • Page 53: Sleep Mode

    Velux 53 menu no. 1 window locate enter back on off p1 p2 enter back display light sleep mode p1 p2 user settings display display house sleep mode 3:43 pm sleep mode the life of the batteries can be prolonged by setting the remote control to go into sleep mode. When it has been set to go into sleep ...

  • Page 54: Keypad Lock

    54 velux menu no. 1 window locate p1 enter back disable enable p2 p1 p2 menu press menu and then locate locate p1 p2 user settings keypad lock house keypad lock keypad lock keypad lock the keypad can be locked so that products cannot be oper- ated without unlocking the keypad. The stop key can still...

  • Page 55: Access Code

    Velux 55 menu no. 1 window locate enter back enter back select / change delete save back confirm code 1 2 3 4 p1 p2 p1 p2 p1 p2 p1 p2 user settings access code house access code access code access code enter code 1 * * * access code you can choose a personal access code to protect your personal sett...

  • Page 56: 005

    56 velux menu no. 1 window locate p1 p2 back p1 p2 005.000.000.091 system settings software version room 1 software version enter back copy system security key configure software version system settings when addressing technical inquiries to your velux sales company, you will be asked to provide the...

  • Page 57

    Velux 57 menu no. 1 window locate p1 p2 yes no p1 p2 clear all groups/ rooms/zones/ programs/names? House settings enter back p1 p2 group rearrange order rename clear room 1 house settings clear clearing remote control settings when clearing the remote control settings, all personal settings for eg ...

  • Page 58: Registering New Products

    58 velux menu no. 1 window locate enter back p1 p2 register product copy system security key configure system settings house system settings auto set-up new products registered information a b registering new products when a new additional product has been installed, it can be registered in a remote...

  • Page 59: Registering New Products

    Velux 59 menu no. 1 blind locate enter p1 p2 enter back p1 p2 new products room 1 modified no. 1 room 1 room 2 new room house place in information blind registering new products now the product must be placed. 7a if no rooms have been created, the product is automat- ically placed in house. Operatio...

  • Page 60

    60 velux.

  • Page 61: Controls

    Velux 61 using additional activation controls products and remote control settings can be copied from one remote control to another. Copying depends on the type of activation control and on whether the remote control to be copied to is new or already in operation. • copying to a new remote control h...

  • Page 62: Note:

    62 velux menu no. 1 window locate p1 p2 a b system settings enter back register product copy system security key configure house system settings copying to a new remote control you can copy the contents from a remote control already in operation to a new one so that the latter can also operate the p...

  • Page 63

    Velux 63 register back prepare products for registration and press register within 10 minutes b auto set-up p1 p2 enter eesti english español français language copying to a new remote control step 2: register products in remote control b 4 insert the three batteries supplied (type aa, 1.5 volt) into...

  • Page 64: Step 2:

    64 velux a b copying to a remote control in operation if you have two remote controls with different products registered, you can copy the contents from one to the other so that the latter becomes an exact copy including all personal settings such as names, rooms and groups. Step 1: change security ...

  • Page 65: Note:

    Velux 65 a b system settings register product menu if you have two remote controls with different products registered, you can add the missing products in both. Then all products can be operated with one or both remote controls. The example shows how to add the products from remote control a to remo...

  • Page 66: Note:

    66 velux menu no. 1 window locate system settings a house p1 p2 enter back register product copy system security key configure system settings b copying products to other types of activation controls you can copy one or more products registered in the remote control to another type of activation con...

  • Page 67

    Velux 67 b step 2: register the product in activation control b to copy a product to control keypad kli 110, please refer to section configuring control keypad kli 110 in addition to existing remote control klr 100 in the instructions provided with the control keypad. The product selected can now be...

  • Page 68: Security Key

    68 velux menu no. 1 window locate enter back p1 p2 change receive yes no change security key in another remote control system settings a b security key house security key change security key each remote control and each product have a security key. To allow for communication between remote control a...

  • Page 69: Others)

    Velux 69 a b system settings security key menu no. 1 window locate enter back p1 p2 change receive house security key step 2: change security key in remote control b (and others) 1 press "menu". 2 scroll through the menus: 3 press to highlight "receive". Press "enter" to confirm your choice. The dis...

  • Page 70: Note:

    70 velux a a min 5 sec resetting and preparing for registration the skylight and all connected electrical products can be reset to remove the present registration and to prepare for a new registration. When resetting, the button located under the skylight operator cover hole closest to the center of...

  • Page 71

    Velux 71 the remote control will be reset. Continue? Yes no information the remote control can be reset to its initial factory set- tings if you want to delete all registered products and all programming and start afresh. 1 slide off the battery cover as shown. 2 press the button on the right side o...

  • Page 72: Note:

    72 velux a b min 10 sec the skylight can be adjusted to three different max- imum openings: 12" (300 mm), 8" (200 mm) and 4" (100 mm). Default is generally 12" (300 mm) but for specific skylights the maximum default opening may be 8" (200 mm). Note: for in-reach applications where the skylight is in...

  • Page 73

    Velux 73 a min 5 sec 4 when the skylight is closed, press and hold the button closest to the center of the skylight ( a ) for at least 5 seconds. The skylight operator and other electrical products connected to the skylight will run briefly back and forth indicating that they are ready to be registe...

  • Page 74: Note:

    74 velux fitting of holder for remote control the remote control is provided with a wall-mounted holder, which can be fitted anywhere in your home. Note: check that the remote control can operate the relevant products from the proposed position before it is fastened to the holder. 1 fit the back sec...

  • Page 75

    Velux 75 if required, the remote control can be fastened with screws to the holder. 1 fit the back section to the wall with the two screws sup- plied. 2 place the remote control in the front section. Clip the white strap around the assembled unit. Hook the as- sembled unit to the back section at the...

  • Page 76: Closing Skylights

    76 velux a closing skylights in case of power failure the chain can be disengaged by removing the plug in the center of the bottom sash and turning the screw, with the provided 2.5 mm hex key, counter-clockwise until it stops. Note: the chain can be re-engaged by executing the above procedure in rev...

  • Page 77: Maintenance

    Velux 77 maintenance switch off the main power supply before proceeding! 1 snow and ice remove snow and ice to allow melted water to drain off from and around the skylight. 2 cleaning the rain sensor dirt on the rain sensor may cause operating problems. Therefore, it is recommended to clean the rain...

  • Page 78: Display Symbols

    Velux 78 display symbols batteries must be changed within 2 weeks (type aa, 1.5 volt). Automatic closing has been activated for the product in question. Automatic closing has been activated for one of the other products in the remote control. Automatic registration of product(s) is running. Note: in...

  • Page 79: Display Texts

    Velux 79 display texts adjustment: velux electrical decoration and sunscreening products are not adjusted to the skylight size on delivery. When operated the first time, they will therefore run from bottom to top of the skylight or vice versa without interruption. After adjustment the product is rea...

  • Page 80: Www.Velux.Com

    U s e r m a n u a l fo r k l r . © 2 0 10 , 2 0 11 , v e lu x g r o u p ® v e lu x a n d t h e v e lu x l o g o a r e r e g is t e r e d t r a d e m a r k s u s e d u n d e r l ic e n c e b y t h e v e lu x g r o u p ca : velux canada inc. 1 800 88-velux (888-3589) jp: velux-japan ltd. 0570-00-8145 ...