Venetex RM-LP20G Operation Manual - page 11
11
⑨ [PREVIEW] : Preview button and Indicator
When this button is pressed, the output signal will appear on the Preview terminal ⑰.
ON (Green light turns on): While [PREVIEW]button is pressed for the period, the indicator will turn
on green. And the output signal is connected.
OFF (Green light turns off): The Preview button is pressed, the indicator turns off.
And the output signal is disconnected.
⑩ [MASTER BLACK] : Master Black Adjust Knob
It adjusts the master Black level.
⑪ [MODE] : Mode Button and Indicator
ON (Green color turns on): It outputs the color bar.
OFF (Green light turns off): It outputs camera signal.
⑫ [GAIN] : Gain Control Area
It switches the gain setting.
⑬ [KNEE POINT] / [AUTO KNEE] : Knee Point Adjustment Knob
[AUTO KNEE] : Auto Knee Button
ON (Green light turns on): Auto Knee function operates. And the knee point is set automatically.
OFF (Green light turns off): Auto knee function becomes off.
Then, you can adjust the knee by turning the [KNEE POINT] knob.
[KNEE POINT] : Knee point level adjustment knob
If [AUTO KNEE] is OFF then, This knob is able to adjust Knee point level.
⑭ [IRIS] : IRIS adjust switch and knob
AUTO: This position determines the auto iris mode.
It adjusts the auto iris level by rotating adjustment knob.
MANUAL: This position determines the manual mode.
It adjusts the iris from OPEN CLOSE by rotating adjustment knob.
Caution
If the setting on the camera is MANUAL mode, AUTO mode does not work.
level down
level up