Venini 60 cm Series User And Installation Instructions Manual - page 11
10
PRE-COMMISSIONING THE APPLIANCE
When unpacked, check that the following parts are included with the appliance:
Sorrento Instruction and Installation Book
2 oven shelves
1 set comprising Grill Pan, Trivet and handle.
4 x Screws and plastic inserts for fixing appliance into housing.
POSITIONING THE APPLIANCE
(see also Figs. 2 and 3, page 13)
These appliances are classified as Class 3. All models can be built into a standard 600mm kitchen
unit.
INSTALLATION NOTES
1.
Ensure that the aperture for oven installation is the correct size as per Fig. 3 at page 12,
including any cut-outs shown.
2.
Ensure that the rear panel of the furniture housing has been removed.
3.
All ovens with which this instruction book is provided may be installed without the need for
any additional ventilation cut-outs.
4. Ensure that the oven has been securely fixed into the housing as per Fig. 2 at page 12.
Fig.2
Using the 4 x screws and plastic
inserts as provided, insert the plastic
inserts
into
the
holes
located
inside
the door cavity and then insert a
screw through each insert and
tighten
until
secure.
Fixing the oven on the cabinet