Vent-Axia Air Minder Plus User Manual - page 11
AIR MINDER plus
R O U T I N E I N S P E C T I O N A N D M A I N T E N A N C E
WARNING:
THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE ISOLATED FROM THE POWER
SUPPLY PRIOR TO, AND DURING MAINTENANCE.
SET
>
>
F
C h
c k
i l t
e
e r
Air Filters
‘Check Filter’ display
(Alternates every 3 seconds with normal running screen).
An inspection of the Intake and Extract Filters are required on
average every three months. An automatic timed reminder is flashed
on the HRU’s Controller.
When the unit is fitted to a new build property the Intake and Supply
filters should be checked at one month intervals for the first six months.
1.
Withdraw the filters as shown on page 2. (Place in a large plastic bag and move to a safe working area).
2.
Using a vacuum cleaner remove any loose dust particles from the filter.
3.
If further cleaning of the media is required, release the catches in the outer frame, remove the filter media and
wash in warm soapy water.
4.
Replace the filter media in the filter frame and allow it to dry.
5.
Insert the filters back into the HRU.
6.
To reset the automatic reminder on the Controller, press and hold the ‘ ’ and ‘V’ Keys for 10 seconds.
Heat Recovery Cube
At intervals appropriate to the installation (e.g. Yearly), the Cube should be inspected and cleaned to ensure there
is no build up of airborne contaminates.
1.
Remove the Filters and Cube as shown on page 2.
(Place in a large plastic bag and move to a safe working area)
2.
Using a vacuum cleaner, remove any loose dust particles from the outside of the Cube.
3.
Using a low pressure water hose, wash out the airways to remove any dust particles and allow to dry.
4.
Replace the Cube and Filters (If applicable) as shown on page 2.
V
5:6. Winter Setting
To prevent the Summer By Pass facility activating
during the Winter.
Press the ‘V’ ‘ ’ and ‘Set’ keys for more than 5 seconds
until the display changes to the screen opposite.
Press the ‘ ’ until the display changes to the screen
opposite.
Press the ‘Set’ key until the display changes to the
screen opposite.
Note the screen will return to its normal display after 20
seconds.
>
SET
>
R
0
n
i
n
n
u
0 0
T
g
0
2
e
m
i
>
SET
>
S
O
r
e
m
m
u
n
o
M
e
d
>
SET
>
S
O
r
e
m
m
u
f
o
M
e
d
f
9
9
V
V