1. DL manuals
  2. Vents
  3. Fan
  4. 100 Flip
  5. User Manual

Vents 100 Flip User Manual - Contents

Manual is about: AXIAL FAN

Summary of 100 Flip

  • Page 1

    Axial fan user’s manual www.Ventilation-system.Com vents 100 solid vents 100 wave vents 100 flip en.

  • Page 2: Contents

    2 en contents delivery set ............................................................................................................................................................................................................................................ 6 brief description ...................

  • Page 3

    3 en this user’s manual is the primary operating document intended for technical, maintenance and operations staff. The manual contains information about purpose, technical details, operating principle, design, and installation of the vents 100 solid (wave/flip) unit and all its modifications. Techn...

  • Page 4: Before Beginning Works.

    4 en follow the user’s manual requirements to ensure durable and trouble-free operation of the unit. Disconnect the unit from power supply prior to any connection, servicing, maintenance, and repair operations. Only qualified electricians with a work permit for electrical units up to 1000 v are allo...

  • Page 5

    5 en the product must be disposed separately at the end of its service life. Do not dispose the unit as unsorted municipal waste. Other solid impurities, sticky substances, or fibrous materials. • do not use the unit in a hazardous or explosive environment containing spirits, gasoline, insecticides,...

  • Page 6: Delivery Set

    6 en delivery set fan - 1 item screws with dowels - 4 items plastic screwdriver - 1 item (only for the models with a timer) user’s manual - 1 item packing box - 1 item brief description the product is an axial fan for exhaust ventilation of small and medium-sized premises heated in winter. The desig...

  • Page 7: Mounting

    7 en mounting the fan can be mounted to the ceiling or onto a wall with air extraction into a ventilation shaft or a matching diameter round air duct (fig. 2). The fan installation steps are given on fig. 3-11. Electric connection diagrams are given on fig. 12-13. Connection diagram terminal key: l ...

  • Page 8

    8 en the timer circuit is live. Make sure the fan is disconnected from power supply. Activation delay value can be set in two ranges: from 10 to 90 seconds and from 2 minutes to 30 minutes. The adjustment range can be selected by means of the jumper on the timer circuit board. Upon control voltage r...

  • Page 9: Maintenance

    9 en h 60% 90% t off 2 min 30 min t on 0 min 2 min for Т1 for Тh/sТН do not use a metal screwdriver, knife, etc. For adjustment operations not to damage the circuit board. Maintenance to clean the unit from any dust and dirt which may accumulate on the surfaces (fig. 14-17) use a soft cloth and a br...

  • Page 10: Manufacturer’S Warranty

    10 en • avoid sharp blows, scratches, or rough handling during loading and unloading. • prior to the initial power-up after transportation at low temperatures allow the unit to warm up at room temperature for at least 3-4 hours. The product is in compliance with eu norms and standards on low voltage...

  • Page 11: Operation Of The Unit.

    11 en • external damage to the unit casing (excluding external modifications as required for installation) and internal components caused by the user. • redesign or engineering changes to the unit. • replacement and use of any assemblies, parts and components not approved by the manufacturer. • unit...

  • Page 12

    12 en 160 128 117 79 ø 99 1. 2..

  • Page 13

    13 en qf l n 3. 4. 5. 6. 7. 8. 9. 10. 11..

  • Page 14

    14 en s n qf l n l s s n qf l n l s s - v n qf l n l qf l n s n s qf l n l s n s qf l n l n qf l n l Т/th vТ/vth 12. 14. 16. 13. 15. 17..

  • Page 15

    15 en quality inspector’s stamp manufacture date seller (name and stamp of the seller) purchase date.

  • Page 16

    V160en-02 acceptance certificate the fan is recognized as serviceable. We hereby declare that the product complies with the essential protection requirements of electromagnetic council directive 2004/108/ec, 89/336/eec and low voltage directive 2006/95/ec, 73/23/eec and ce-marking directive 93/68/ee...