Vents 100 Flip User Manual - Maintenance
9
EN
H
60%
90%
T
off
2 min
30 min
T
on
0 min
2 min
for Т1
for ТH/SТН
DO NOT USE A METAL SCREWDRIVER, KNIFE, ETC. FOR ADJUSTMENT
OPERATIONS NOT TO DAMAGE THE CIRCUIT BOARD.
MAINTENANCE
To clean the unit from any dust and dirt which may accumulate on the surfaces (Fig. 14-17) use a soft cloth and a brush
soaked in a mild detergent solution. Avoid spilling liquid on the electrical components. Wipe the cleaned surfaces dry.
•
Store the unit in the manufacturer’s original packaging box in a dry closed ventilated premise with temperature range
from +5 ˚С to +40 ˚С .
•
Storage environment must not contain aggressive vapours and chemical mixtures provoking corrosion, insulation, and
sealing deformation.
•
Use suitable hoist machinery for handling and storage operations to prevent possible damage to the unit.
•
Follow the handling requirements applicable for the particular type of cargo.
•
The unit can be carried in the original packaging by any mode of transport provided proper protection against
precipitation and mechanical damage. The unit can be transported only in the working position.
STORAGE AND TRANSPORTATION REGULATIONS
The fan is supplied with a special plastic screwdriver. Use the
screwdriver to adjust the fan activation or deactivation delay
or the humidity sensor threshold value.