Venture Cycle LandRider Assembly Instructions Manual - page 3
STEP 1: ASSEMBLY PREPARATION
A) Using a pair of scissors, carefully cut all the ties holding the bike parts together.
DO NOT USE A BLADE, AS THIS IS DANGEROUS AND COULD PUNCTURE THE TIRE.
B) Carefully free Front Wheel which is supported by Crank Arm and Handlebar Stem.
DO NOT REMOVE THE PROTECTIVE WHITE CARDBOARD SLEEVES WRAPPED AROUND
THE FRAME UNTIL THE BIKE IS COMPLETELY ASSEMBLED.
C) Remove the protective caps from the Wheel Hubs on the Front and Rear Wheels.
STEP 2: PRE-ASSEMBLY CHECK
Lay out all the components and tools for a pre-assembly check list. If any parts are missing, call
LandRider at: 1-800-945-5335.
Pre-Assembly Check List
Main Box
1. Frame Assembly (including Handlebars)
2. Seat Assembly (including Seat Post)
3. Front Wheel Assembly
Small Box
4. Pedal (right)
5. Pedal (left)
6. Front Wheel Quick Release for Front Wheel Assembly
2
7. Wrench (14/15 mm)
8. Multi Tool Set (includes 2,2.5,3,4,5 & 6 mm Allen Keys, Philips head and regular screw driver)