Ventus w160 Owner's Manual - page 3
WEATHER FORECAST & BAROMETRIC PRESSURE
The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric
pressure. The coverage area is around 30 – 50 km. The weather forecast is based on atmospheric
pressure change and is about 70-75% correct. As weather conditions cannot be 100% correctly
forecasted, we cannot be responsible for any loss caused by an incorrect forecast.
SUNNY PARTLY CLOUDY
CLOUDY
RAINY
STORMY
To obtain an accurate weather forecast & barometric pressure reading, you need to input your current
altitude. After the reset of the unit, it will enter the altitude setting mode. Press “ ” or “ ” to set the
unit first, and then press “PRESSURE” and enter your current altitude. Press “PRESSURE” to confirm
and exit the setting. You can also hold “PRESSURE” button to enter altitude setting mode during
normal use.
Press PRESSURE button to select pressure unit between hPa, inHg & mb.
IN/OUT TEMPERATURE & HUMIDITY
Temperature reading is located on the lower left of the display and humidity is on the lower right.
Press “C/F“ button to select temperature unit C/ F.
Press CHANNEL/SEARCH button to select indoor, Ch1, Ch2, Ch3 and auto-channel scrolling
display modes.
IN/OUT HEAT INDEX
Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot the
heat-humidity combination makes it feels.
Press “Heat Index/Dew Point” button once to show the respective indoor or outdoor heat index on the
lower left display. “HEAT INDEX” icon will appear.