VeriFone Omni 3600 Reference Manual - Hapter
O
MNI
3600 R
EFERENCE
M
ANUAL
7
C
HAPTER
1
Omni 3600 Terminal and Omni 3600 Base Installation
This chapter describes how to set up and install the Omni 3600 terminal and
Omni 3600 base, including how to:
•
protect the terminal from adverse
Environment
al conditions,
•
install and maintain the
Smart Battery
,
•
establish communications connections through the
Omni 3600 Base
Communications Ports
, and
•
connect optional peripheral devices through the Omni 3600 base (see
Peripheral Devices
).
Select a
Location
This section provides tips on using and protecting your Omni 3600 terminal, and
location recommendations for the Omni 3600 base.
Omni 3600
Terminal
The Omni 3600 is a portable terminal for performing transactions remotely. Since
it is a portable unit, location is not a factor however, follow the rules established in
the
Environment
and
Convenience
sections.
Omni 3600 Base
A prime location for the Omni 3600 base is a counter or other flat surface that
provides easy access to a power outlet and phone jack. Also, follow the rules
established in the
Environment
and
Convenience
sections.
Environment
•
Do not use the Omni 3600 terminal or Omni 3600 base where there is
moisture or high humidity, chemicals or oils, or excessive heat or dust.
•
Avoid locations near electrical appliances or other devices that emit excessive
voltage fluctuations or electrical noise (for example, air conditioners, electric
motors, neon signs, high-frequency or magnetic security devices, or computer
equipment).
NOTE
This installation procedure is also available for end users in the Omni 3600
Installation Guide
(VeriFone part number 22060), which can be downloaded at:
http://www.verifone.com/support/index.html
WARNING
Do not leave this terminal in a non-climate-controlled
vehicle. The Omni 3600 terminal is highly sensitive to
temperature extremes. Subjecting the terminal to temperatures
outside the stated
operating range
can void your warranty.