1. DL manuals
  2. Verint
  3. Security System
  4. Nextiva S1700e Series
  5. Installation Manual

Verint Nextiva S1700e Series Installation Manual

Other manuals for Nextiva S1700e Series: User Manual

Summary of Nextiva S1700e Series

  • Page 1

    Nextiva s1700e series installation guide.

  • Page 3: Nextiva S1700E Series

    Nextiva s1700e series installation guide verint video solutions.

  • Page 4

    © 2005 verint systems inc. All rights reserved. By providing this document, verint systems inc. Is not making any representations regarding the correctness or completeness of its contents and reserves the right to alter this document at any time without notice. Verint, actionable intelligence, behav...

  • Page 5: Contents

    Verint video solutions iii contents preface ...................................................................................... V who should read this guide .................................................... Vi how to use this guide ............................................................ V...

  • Page 6

    Contents iv verint video solutions index ....................................................................................... 25 edge device description form .................................................. 27.

  • Page 7: Preface

    Verint video solutions v preface the nextiva s1700e series installation guide explains how to configure and install the nextiva tm s1700e series edge devices..

  • Page 8: Who Should Read This Guide

    Preface vi verint video solutions who should read this guide this guide is intended for engineers and technicians who will install the s1700e series edge devices. It provides basic information on how to configure and install the devices. This guide assumes that you are familiar with: installation an...

  • Page 9: About Us

    Nextiva s1700e series installation guide verint video solutions vii in addition to this guide, the following documentation is also available: nextiva s1700e series user guide sconfigurator user guide release notes all these documents are contained on the smartsight utilities cd shipped with the devi...

  • Page 10: Support

    Preface viii verint video solutions to request the latest versions of firmware and software or to download other product-related documents, you need access to the verint video solutions partner extranet. To register, go to http://vvs.Verint.Com . Support if you encounter any type of problem after re...

  • Page 11: Overview

    Verint video solutions 1 1 overview designed for video monitoring and surveillance over ip networks, the s1700e series edge device is a self-contained solution delivering dvd quality, 4cif video at 30 frames per second in ntsc (25 frames in pal) over 10/100base-t networks. Two compression modes are ...

  • Page 12: About The S1700E Series

    1: overview 2 verint video solutions about the s1700e series the s1700e series devices are for indoor use only. Each device is configured to interface, right out of the box, with the most popular camera data port configuration (4800 baud, 8 data bits, no parity, 1 stop bit). The s1700e series curren...

  • Page 13: Shipment

    Nextiva s1700e series installation guide verint video solutions 3 shipment your s1700e shipment contains the following items: the requested transmitter device either a power-over-ethernet kit (injector and power cord) or a 12v dc external power supply the smartsight utilities cd containing the relea...

  • Page 14: Casing Description

    1: overview 4 verint video solutions casing description the s1700e electronics are enclosed in a non-weatherproof steel casing that is not meant for outdoor use. The front panel consists of: an rj-45 jack for poe or the ethernet network a system status led a reset button a db-9 connector for the rs-...

  • Page 15

    Nextiva s1700e series installation guide verint video solutions 5 the back panel consists of: a 12-pole connector for power, dry-contact inputs, relay outputs, and rs-422/485 one bnc connector for video input optional audio connectors a slot for an sd device (for future development) out in 3 in 2 in...

  • Page 16

    6 verint video solutions.

  • Page 17: Configuration and

    Verint video solutions 7 2 configuration and installation the steps required to prepare your s1700e device for operation are: basic configuration, mainly for communication and serial connection physical installation in its final location.

  • Page 18: Configuration

    2: configuration and installation 8 verint video solutions configuration the configuration steps to execute are: assembling the power-over-ethernet kit (on the poe devices only) setting a series of parameters, including the ip address establishing a point-to-point connection between a receiver and a...

  • Page 19: Assembling The Poe Kit

    Nextiva s1700e series installation guide verint video solutions 9 assembling the poe kit you use the supplied power-over-ethernet (poe) kit to power the s1700e-poe device and establish the ethernet connection. The kit contains two items: an injector and a power cord. Warning: on a poe device, never ...

  • Page 20

    2: configuration and installation 10 verint video solutions to assemble the poe kit: 1. In a lab, unpack the device and its poe injector and place them on a table. 2. Plug a straight-through ethernet cable into the lan 10/100 connector on the front of the s1700e device. Note: the maximum length of t...

  • Page 21

    Nextiva s1700e series installation guide verint video solutions 11 3. Plug the other end of the cable into the data & pwr port of the injector. 4. Connect a second ethernet cable (straight-through or crossover) into the data port of the injector. The crossover cable is to directly connect the device...

  • Page 22: Preparing A 12V Dc Device

    2: configuration and installation 12 verint video solutions preparing a 12v dc device to prepare a 12v dc device for configuration: 1. In a lab, unpack the s1700e and place it on a table. 2. Establish the ethernet connection by plugging a cable (crossover or straight-through) into the lan 10/100 con...

  • Page 23: Setting Device Parameters

    Nextiva s1700e series installation guide verint video solutions 13 setting device parameters the first step in installing an s1700e device is to change its ip address to ensure compatibility with an existing network. Write down the ip information in the form located at the end of the guide, on page ...

  • Page 24

    2: configuration and installation 14 verint video solutions 3. In the general tab, click program options. The program options window appears. 4. Ensure that the vsip port is 5510; otherwise, click default. 5. Ensure that the discovery ip address is 255.255.255.255; otherwise, click reset to broadcas...

  • Page 25

    Nextiva s1700e series installation guide verint video solutions 15 7. Select the units tab, then click discover. A device of type “unknown” with a 169.254.X.Y ip address appears in the units box; it corresponds to your new device..

  • Page 26

    2: configuration and installation 16 verint video solutions 8. Select the unknown device, then click configure. In the reconfigure unit?Confirmation window, click yes. The new network configuration window appears. 9. To use dhcp (dynamic host configuration protocol), check use dhcp. Otherwise, enter...

  • Page 27: Point-to-Point Connection

    Nextiva s1700e series installation guide verint video solutions 17 11. In the units tab, click discover. The new s1700e device appears. 12. Select the device, then click configure. 13. Configure the serial port parameters to match those of the target equipment (for instance, camera or ptz keyboard)....

  • Page 28

    2: configuration and installation 18 verint video solutions to perform a point-to-point connection: 1. Start sconfigurator. 2. In the units tab, discover the desired devices. The discovered devices appear in the units box. 3. Select the connections tab, then click add. The connection creator window ...

  • Page 29

    Nextiva s1700e series installation guide verint video solutions 19 4. Select a transmitter in the left column and a receiver in the right one. In the transmitters column, you have access to the two encoders of each input; the video stream is the same for both. Stream1 is typically reserved for web v...

  • Page 30: Installation

    2: configuration and installation 20 verint video solutions installation when your device is successfully configured, it is ready to be installed in its final location. If your s1700e device is powered using poe, you can use the two dc pwr poles on the back of the device to power a camera. The suppl...

  • Page 31

    Nextiva s1700e series installation guide verint video solutions 21 4. If required on a poe device, connect the power wires of a camera to the dc pwr poles on the connector on the back of the device. For the maximum length of the camera power wire, refer to the s1700e series user guide. 5. If require...

  • Page 32: Status Led

    2: configuration and installation 22 verint video solutions 6. When installing a device with the extended temperature option, make it stand vertically, allowing for better cooling. Status led the system status led is a bicolor (green-red) led providing detailed information on the current state of th...

  • Page 33

    Nextiva s1700e series installation guide verint video solutions 23 * at least one of them must be transferred to obtain the led condition. The following power-up conditions on the system status led are abnormal: led not lit—check the power supply and cabling. If power is available and the led stays ...

  • Page 34

    2: configuration and installation 24 verint video solutions flashing green-red led not during a firmware update—the device is in backup mode; you will need to perform a firmware update using a serial connection..

  • Page 35: Index

    Verint video solutions 25 index a abnormal power-up conditions 23 c cable, ethernet 10 , 11 camera data port configuration 2 powering 20 casing of the device 4 cd, utilities vii characteristics of the device 2 computer requirements 8 configuration camera data port 2 device 8 – 17 connection poe 9 – ...

  • Page 36

    Index 26 verint video solutions p panel of device 4 poe (power-over-ethernet) injector 9 – 11 point-to-point connection 17 power connection 9 – 11 , 12 power requirements 2 power supply 9 power-up conditions 23 r requirements computer 8 power 2 s sconfigurator configuring the device 8 , 13 – 17 crea...

  • Page 37: Edge Device

    Verint video solutions 27 edge device description form.

  • Page 38

    Edge device description form 28 verint video solutions during configuration, write down the following settings that may be required by verint video solutions customer service for troubleshooting: system firmware version vsip vsip port video bit rate frame rate resolution network ip address gateway s...

  • Page 39

    Verint video solutions 1800 berlier street laval (quebec) canada h7l 4s4.