Verizon 4G LTE Get To Know - page 7
STEP 3: CONNECTING YOUR TELEPHONE
This device provides ports for up to two telephones. Both ports use the same
telephone number.
1. Unplug your telephone’s cord from your wall’s telephone jack.
WARNING! Do not plug this device into your telephone wall jack.
2. Plug the end of the telephone cord that was just removed from the wall jack
into one of the two phone ports on the back of the device. The other end of
the cord must remain plugged into the back of your telephone’s base unit.
NOTE: The telephone and telephone cord are sold separately. Rotary, pulse dialing, and Voice over
IP (VoIP) phones are not supported.
IMPORTANT!
If the device is in active mode and running on the battery alone, only voice calls are
supported.
If the Power button is pressed and held, the device will enter charging mode. When
in charging mode, the device screen displays the battery charge indicator ( ). To
resume normal operation, press the Power button. To completely turn off the device,
disconnect from AC power.