Verizon 4G LTE Get To Know - page 6
4
LED or Button
Activity
Description
WPS (Wi-Fi Protected Setup) Mode: Click the WPS button on the router to connect with other WPS-enabled devices
within two (2) minutes.
Solid green
WPS wireless connection is established.
WPS
Blinking green
WPS wireless LAN activity is present (traffic is passing through device in either
direction).
Wi-Fi
Turns off the Wi-Fi connection. Wi-Fi and 4G LTE are on by default.
Solid green
Router power is on. Router is operating normally.
Solid amber
POST (power-on self-test) is in progress.
Power
Off
Router power is off.
Solid green
Internet connection is established.
Solid amber
Traffic meter limit has been reached, and traffic is blocked. This feature is user
settable. Please see the User Manual for more information.
Blinking green
Data is being transmitted over the Internet connection.
Blinking amber
Traffic meter limit has been reached, but traffic is not blocked. This feature is user
settable. Please see the User Manual for more information.
Internet Port
Off
No Internet connection is detected.
The table below describes possible states for each of the device indicators:
Understanding the Indicators
Guide for more information.
Guide for more information.
Press the WPS button on the router and within (2) minutes, connect other Wi-Fi devices with WPS
capability.
* Further explanation of the indicators and associated settings can be found in the downloadable User Guide at
verizonwireless.com/support
or by calling
1-800-229-1235
to order a copy.
is on by default.