Verizon One Talk W56HV User Manual - page 20
User guide
PREVIOUS
|
CONTENTS
|
NEXT
One Talk—W60B user guide
20
Deleting all entries from a handset’s blacklist
1. Press
to enter the main menu.
2. Press
Settings->Telephone->Caller Blacklist.
3. Press the
Options soft key and select
Delete All.
4. When the LCD screen prompts “Delete All?,”
press the
Yes soft key to delete all entries or
the
No soft key to cancel.
Placing a call from the blacklist
1. Press
to enter the main menu.
2. Press
Settings->Telephone->Caller Blacklist.
3. Press
or
to highlight the desired contact.
4. Press
to call the contact.
Shortcuts
Shortcut capabilities have been pre-assigned
to the handset’s different keys. For example,
holding down
for a few seconds toggles
the handset’s silent mode on and off, while
pressing
when the handset is idle will access
the directory.
The actions of some shortcut keys are
permanently fixed, while some can be changed.
The assignments of the shortcut keys that can be
changed include the two soft keys and four arrow
navigation keys. The ability to change these
shortcut keys’ assignments allow you to gain
quick access to a feature you frequently use,
rather than scrolling through multiple steps with
the handset’s menu system.
The default feature assignments for the
changeable shortcut keys are as follows:
Shortcut key
Default feature assignment
Left soft key
History
Right soft key
Line status
Handset intercom
Directory
Volume down
Volume up
Do the following to change a shortcut feature
assignment on a handset:
1. Press
to enter the main menu.
2. Select
Settings->Shortcut.
3. When the LCD screen displays the changeable
shortcuts and their current assigned features,
use
or
to highlight the shortcut you want
to change.
4. Press the
Change soft key to access the
available features.
5. Use
or
to highlight the new feature you
want to assign to that key.
6. Press the
OK soft key to save the change or
the
Back soft key to cancel.
Other calling features
Call waiting
Call waiting allows you to put an ongoing call on
hold to accept a new incoming call. With call
waiting enabled, while on an active call, the
handset will notify you of a new incoming call by
displaying the caller information on the LCD
screen. With call waiting, placing the handset in
the charging cradle will not end an on-hold call.
Answering a call waiting call
Press ,
or the
Accept soft key to answer
the new incoming call and place the original call
on hold.
Do not disturb (DND)
When DND mode is activated for a specific line,
all incoming calls to that line will automatically
be rejected and callers will hear a busy tone. You
can activate or deactivate DND mode on a
per-line basis.
Do the following to activate DND mode:
1. Press
to enter the main menu.
2. Select
Features->Do Not Disturb.