Verizon One Talk W56HV User Manual - page 6
User guide
PREVIOUS
|
CONTENTS
|
NEXT
One Talk—W60B user guide
6
Welcome
The Verizon One Talk
SM
DECT IP Phone W60
Bundle gives your business a full-featured,
high-performance Session Initiation Protocol
(SIP) cordless phone system that integrates with
your smartphones and tablets. The W60B Base
Station can be paired with up to five W56HV
Handsets. And because it supports integrated
One Talk service features, it lets your users’
mobile devices and cordless handsets work
together with one number.
Initial setup
If your W60B Base Station and W56HV Handset
were not connected and set up by your
IT administrator, verify the following with
your administrator:
• You have a One Talk number.
• Your user information has been updated in the
One Talk Admin Portal with your 911 address
and email address.
• Your number has been included in any business
group features.
Charging the handset battery
The handset battery comes partially charged and
the handset should automatically turn on once
you insert the battery. If the handset doesn’t
automatically turn on, press
to turn it on.
To make sure the handset battery gets a full
charge, plug the charging cradle into a power
outlet and place the handset in the cradle. Be
sure to only use the supplied charging-cradle
power adapter (5V/600 mA). With the battery
charged, you’ll be able to use the handset to
monitor the progress of the base station
initialization and registration process.
Setting up the base station
The base station can be set up on your desktop
using the base stand or mounted on a wall.
MAC
SN
MAC
SN
Desktop setup option
MAC
SN
MAC
SN
59mm
59mm
Wall-mount setup option
Connecting the base station to power
and Ethernet
You have the option to power your base station
with either AC power (wall outlet) or Power over
Ethernet (PoE). Your system administrator will
advise you which option to use.
AC power option
Connect the Ethernet cable from your base
station’s internet port to your Ethernet wall jack
or directly into your router port. Next, plug your
base station’s power adapter into a wall outlet.
Be sure to use the Verizon-supplied power
adapter (5V/600 mA). A third-party power
adapter might damage the base station.
PoE option
Connect the Ethernet cable from your base
station’s internet port directly into the port of
an IEEE 802.3af–compliant PoE data router.
For this option, you don’t need a power adapter,
but you do need to make sure your hub/switch
is PoE compliant.
Startup
After your phone is powered on, the system boots
up and performs the following steps:
1. DHCP
By default, the phone attempts to contact a
Dynamic Host Configuration Protocol (DHCP)
server in your network to obtain valid IPv4 or IPV6
network settings.
2. Automatic phone initialization
When your One Talk phone is connected to the
network and powered on, it will automatically
start the initialization process. The LCD screen
displays “Initializing, please wait during this
process.” The phone finishes the initialization by
loading the saved configuration.
After starting up and confirming the 911 address,
the phone is ready for use.