Verizon USB727 Hardware User Manual - page 7
USB727 Modem USER GUIDE
5
Your Verizon Wireless USB727
The USB727 Modem has been developed for mobile computing and supports the Universal Serial Bus (USB)
interface. Almost every notebook, desktop, and handheld computing device has a Type A USB port which
opens up the option for you to easily move your Verizon Wireless USB727 Modem from platform to platform
(for example, from your personal digital assistant to your notebook) and even use on different operating
systems,(for example from Windows to Mac).
Note: VZAccess Manager software is required to be installed on each device to support the modem.
1.
USB Connector: USB form factor plugs into any device with a Type A USB port.
2.
microSD Slot: Utilize memory storage up to 4GB with a microSD card (sold separately)
3.
Flip-up Antenna:The advanced dual band diversity antenna system design incorporates a flip-up
antenna, maximizing data speed performance and allowing for stronger network signal reception.
(When connected to the network, always have the antenna in the raised position.)
4.
External Antenna Connector: Connect an optional external antenna to the USB727 Modem for
improved performance in fringe areas
5.
Protective Cap: Protects USB Connector from debris/damage when not in use.
6.
Lanyard hook: Permits use of lanyard accessory for wearable portability of the USB727.
7.
Service Status Indicator (LED): Visual simple service status LED indicator that shows you service
and data modes. The LED lights are green, red, and amber and operate as follows:
LED not lit
No Power to Modem
LED GREEN - Solid
Modem is powered but not transmitting or receiving
LED GREEN – slow blinking
Modem searching for a CDMA network
USB Connector
microSD Slot
Flip-up Antenna
External Antenna Connector
Protective Cap
Lanyard hook (on bottom of device)
Service Status Indicator (LED)
Bottom view, antenna end