Volaris RA User Manual - page 8
8
Tips for use
Adjust the brake on the RA for
correct functionality
The braking effect can be set using the cable adjuster
under the frame and/or on the brake handle.
1. Release/slacken the parking brake.
2. Loosen the nut in the middle with a 8 mm span-
ner.
3. Screw out the threaded, long, hexagonal shaft to
increase the braking effect. Screw in the threaded,
long, hexagonal shaft to decrease the braking effect.
4. Tighten the nut in the middle with a 8 mm span-
ner. You should adjust the brake so the brake pad
is approx. 1-2 mm from the wear track without it
"catching on the wear track". If you adjust the brake
too hard, activating the parking brake will be unnec-
essarily hard.
Learn the "scissors technique"
Approach the obstruction at an angle. Apply the
brake on the wheel closest to the obstruction. Tilt the
rollator slightly backwards, so the front wheels lift
up, swing the front wheels over the obstruction. It is
easy once you have learned how!
Comfort Frame
The RA is built with a Comfort Frame™, which
means that it passes smoothly over uneven surfaces.
When you need to pass over a larger obstruction or
mount a pavement edge, you can get help from the
tilting peddle by the rear wheels. Press down one
of the peddles at the same time as you lift using the
handles.
When walking over an obstruction, don't
lift the rollator by the seat since this
could cause it to fold!
2
3
1