Volth S-36 Instruction Manual - page 2
I. Introduction
Welcome to use this product. The updated BM802A adopts high-performance MCU
processor,it is Great Value as has high reliability,security, automatically setting range
funcition,hand-held clamp meter etc.. the product has a large digital display, full range
overload protection, data-hold function, undervoltage indication, auto shut off function,
it has TRUE RMS measurement function which can accurately measure frequency
voltage, non-sinusoidal voltage and inrush current measurement function which can
measure inrush current about 80mS RMS, it also has temperature measurement
function which can accurately measured -50~1000°C
, the instrument is suitable for
frequency-converting power supply, air conditioning, refrigeration equipment such as
refrigerators, motor performance test, It is more excellent for a new generation of
practical electrical measuring instrument .
This product is ideal instrument for test, maintenance and repais in college, smelting,
communications, manufacturing, petroleum, electric power, national defense,electronic,
electric power equipment .
II. Safety standard
The meter in structure complies with the safety requirements of ICE61010-1. Read
the instruction carefully as follows before you use the meter:
1. When measuring voltage, AC or DC voltage should not be more than the peak
voltage (DC / AC 1000V) of the meter.
2. Voltage of less than 36V is safety voltage. When the voltage is more than
DC 51V or AC36V, the leads should be checked. The test lead should be
connected correctly and their insulating property should be under excellent
status against electric shock.
3. When change of functional measuring range, the test lead should be away from
test point.
4. It is suggested that for safety the functions and range should be selected correctly
although protective function for the full measuring range exists.
5. When measurement of current, the input current shouldn’t be more than the
maximum current labeled on input end.
6. Safety symbols:
Warning!
risk of high voltage and electric shock!
Double insulated.
III. Features
3.1 General
3.1.1 The meter is based on CMOS large scale IC and can automatically changed
measuring range for measurement of AC/DC voltage, AC, resistance,
frequency and capacity, which makes the meter easy to be used.
3.1.2 Display mode: Display by LCD.
3.1.3 Maximum display: 3999
3.1.4 Maximum span of jaw : 52mm.