Operation manual this manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during installation, operation or maintenance. The information provided in this manual was deemed accurate as of the publ...
Page 2 operation manual 1) read these instructions. 2) keep these instructions. 3) heed all warnings. 4) follow all instructions. 5) do not use this apparatus near water. 6) clean only with a dry cloth. 7) do not block any ventilation openings. Install in accordance with the manufacturer s instr- uc...
Operation manual page 3 ce declaration of conformity equipment type: audio power amplifiers model names: zenith 3000,zenith2400,zenith1800 this product has been assessed against the following applicable standards, emc (89/336/eec electromagnetic compatibility): en55013:2001 sound and television broa...
Page 4 operation manual table of contents important safety instructions .......................................................2 declaration of conformity ............................................................3 1 welcome ............................................................................
Operation manual page 5 1 welcome the zenith series of power amplifiers from represents a new era in affordable, quality power amplification. Modern power amplifiers are sophisticated pieces of engineering capable of producing extremely high power levels. They must be treated with respect and correc...
Page 6 operation manual 2 setup 2.1 unpack your amplifier please unpack and inspect your amplifier for any damage that may have occurred during transit. If damage is found, notify the transportation company immediately. Save the shipping carton as evidence of damage for the shipper s inspection. We ...
Operation manual page 7 2 setup figure 2.2 balanced input connector wiring figure 2.3 unbalanced input connector wiring figure 2.4 left: speakon output connector on back panel right: speakon cable connector output assignment pin 1+ : pin 1- : signal ground pin 1+ : pin 1- : signal ground output a ou...
Off 80hz 125hz low pass -a link a link b input a input b pin1: pin2: pin3: signal gnd signal + signal - pin1: pin2: pin3: signal gnd signal + signal - off 35hz 80hz high pass -a stereo parallel bridge mode caution risk of electric shock do not open ! Output b push to reset 26db 32db 0.775v gain ~220...
Off 80hz 125hz low pass -a link a link b input a input b pin1: pin2: pin3: signal gnd signal + signal - pin1: pin2: pin3: signal gnd signal + signal - off 35hz 80hz high pass -a stereo parallel bridge mode caution risk of electric shock do not open ! Output b push to reset 26db 32db 0.775v gain ~220...
Off 80hz 125hz low pass -a link a link b input a input b pin1: pin2: pin3: signal gnd signal + signal - pin1: pin2: pin3: signal gnd signal + signal - off 35hz 80hz high pass -a stereo parallel bridge mode caution risk of electric shock do not open ! Output b push to reset 26db 32db 0.775v gain ~220...
Operation manual page 11 2.7 connect to ac mains 2 setup connect your amplifier to the ac mains power source (po- wer outlet) with the supplied ac power cable. First, co- nnect the iec end of the cable to the iec connector on the amplifier; then, plug the other end of the cable to the ac mains. Warn...
Page 12 operation manual 3 operation 3.1 precautions your amplifier is protected from internal and external faults, but you should still take the following precautions for optimum performance and safety: 1. Before use, your amplifier first must be configured for proper operation, including input and...
Off 80hz 125hz low pass -a link a link b input a input b pin1: pin2: pin3: signal gnd signal + signal - pin1: pin2: pin3: signal gnd signal + signal - off 35hz 80hz high pass -a stereo parallel bridge mode caution risk of electric shock do not open ! Output b push to reset 26db 32db 0.775v gain ~220...
Page 14 operation manual 4 specifications professional power amplifier minimum guaranteed power zenith 1800 zenith 2400 zenith 3000 performance damping factor (8 ohm): 20 hz to 400 hz low cut:linkwitz-riley(24db/octave) low pass:linkwitz-riley(24db/octave) 1 khz with 0.5% thd stereo, 4 ohms (per ch....
Operation manual page 15 4 specifications professional power amplifier minimum guaranteed power construction performance ac line voltage and frequency configurations available ( 10%) ac line current (both amplifiers draw no more than 90 watts at idle) ventilation cooling dimensions weight net shippi...
Www.Prolight.Co.Uk.
