Wacker Neuson AD Series Operator's Manual - Operation
Operation
AD ...
wagtx5700000016en.fm
10
Caution
The air dehumidifier is equipped with an automatic safety device. This
is why the compressor is turned on only 1 minute after you have
pressed the main switch (a).
* Turn the rotary control (d) of the moisture meter in the counterclock-
wise direction until you obtain the desired humidity.
To turn off the machine, set the green main switch (a) to the "OFF" po-
sition.
Caution
If the room temperature falls below the permissible level (3 °C), the air
dehumidifier will not function. The control lamp (b) will blink.
4.2.2
Water collecting pan (not for AD 80)
If the water collecting pan (9) is full, the air dehumidifier will switch off.
The control lamp (c) is lit. After you empty the pan, you can restart the
air dehumidifier.
Caution
Before you remove the water collecting pan, disconnect the machine
from the electric power supply. Set the main switch to the "OFF" posi-
tion and pull the power plug from the electrical socket.
Caution
Carefully slide the water collecting pan back into the machine. This
helps prevent damage or inadvertent actuation of the switch connected
to the float.