Wacker Neuson EH 9 BL M Operator's Manual - page 12

Safety

EH 9

12

Operator's controls

Always keep the operator's controls of the machine dry, clean and free of oil or 

grease.

Operating elements such as ON/OFF switch, gas handles etc. may not be 

locked, manipulated or changed without authorization.

Checking for signs of damage

Inspect the machine when it is switched off for any signs of damage at least once 

per work shift.

Do not operate the machine if there is visible damage or defects.

Have any damage or defects eliminated immediately.

3.2

Qualification of the operating personnel

Operator qualifications

Only trained personnel are permitted to start and operate the machine. The fol-

lowing rules also apply:

You are physically and mentally fit.

You have received instruction

on how to independently operate the machine.

You have received instruction in the proper use of the machine.

You are familiar with required safety devices.

You are authorized to start machines and systems in accordance with the 

standards governing safety.

Your company or the operator has assigned you to work independently with 

this machine.

Incorrect operation

Incorrect operation or misuse by untrained personnel can endanger the health 

and safety of the operator or third persons and also cause machine and material 

damage.

Operating company responsibilities

The operating company must make the operator's manual available to the oper-

ator and ensure that the operator has read and understood it.