Wacker Neuson EHB 11 BL Operator's Manual - Ehb 11
Other manuals for EHB 11 BL:
Operator's Manual, Operator's Manual
Manual is about: Electric hammer
of
54
EHB 11
Operation
33
7.3.3
Tool holder for tool with hexagonal bolt
Inserting tool
1. Clean tool end.
2. Swivel out retaining spring.
3. Push tool into the tool holder as far as it will go.
4. Return retaining spring to original position.
5. Check to see if the tool is locked by pulling on the tool.
Removing tool
1. Swivel out retaining spring.
2. Remove tool from the tool holder.
3. Return retaining spring to original position.
Item
Designation
1
Tool
2
Retaining spring