Summary of STU-500B
Page 1
Instruction manual lcd signature tablet stu-500b ver. 1.1 8 sep, 2010 wacom co., ltd.
Page 2
Wacom co., ltd. 1 table of contents 1. Scope ...........................................................................................................................................................2 2. Summary ..........................................................................................
Page 3
Wacom co., ltd. 2 1. Scope this instruction manual applies to the lcd signature tablet stu-500b. 2. Summary the wacom® stu-500b lcd signature tablet combines the benefi ts of a liquid crystaldisplay (lcd) with the control, comfort, and productivity of wacom’s cordless, batteryfree pen technology. Th...
Page 4
Wacom co., ltd. 3 handling warning if using a power adapter with the stu-500b, only use the power adapter (serial kit fuz-a147) that designed for use with the stu-500b. If a different type of power adapter is used, the lcd signature tablet will not work properly or may be damaged. Using a different ...
Page 5
Wacom co., ltd. 4 blotching occurs, leave the stu-500b ’s display on and the blotching should disappear within a few hours. Wacom lcd signature tablet products comply with the european union rohs directive 2002/95/ec (rohs directive). Federal communications commission (fcc) notice this device compli...
Page 6
Wacom co., ltd. 5 2) this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 4. Cautions for using stu-500b connecting the tablet the stu-500b can be connected to a host computer via a usb or serial cable. However, do not connect both usb and serial...
Page 7
Wacom co., ltd. 6 5. Product specification 5-1 general specifications main body exterior color dark gray size 160.0mm(w) x 182.5mm(d) x 24.6mm(h) mass 400g pen holder tray and penholder hole main body fixation bottom fixation hole status display led power supply voltage +5v dc power consumption 2.6 ...
Page 8
Wacom co., ltd. 7 5-3 coordinate coordinate specifications technology electro-magnetic resonance technology active area 103.76 x 78.32 mm maximum coordinate (x)10376 (y)7832 resolution 0.01mm(2540ppi) coordinate accuracy ±0.5mm（tilted ±50°from vertical） accuracy assurance height 0mm(height from the ...
Page 9
Wacom co., ltd. 8 5-7 environmental conditions ambient temperature operation +5c ~ +35c storage -10c ~ +60c relative humidity operation 20 ~80%(noncondensing) storage 20 ~90%(noncondensing) 6. Accessories and optional serial kit 6-1 accessory list (stu-500b) parts number qty usb cable(1.5m) stj-a257...
Page 10
Wacom co., ltd. 9 6-3 pen specification name model number remark main body up-610-74a-1 electronic pen physical dimensions Φ9×140.5 mm weight 11 g color dark gray rear case material abs color dark gray front case material abs color dark gray tip material pom color white.
Page 11
Wacom co., ltd. 10 6-3 usb cable(stj-a257) name model number length color type usb cable stj-a257 1.5m black usb standard.
Page 12
Wacom co., ltd. 11 7. Fixing stu-500b stu-500b can be fixed on the table etc. Please refer for fixing stu-500b. The following; wood screw is recommended for fixing. Φ dk: 4 ~ 5.8mm k: less than 2mm l: 10mm is recommended (more than 10mm) Φ d: 2 ~ 3mm a) screw wood screws to the table etc. By followi...
Page 13
Wacom co., ltd. 12 dimension of screwing (top view).
Page 14
Wacom co., ltd. 13 b) put stu-500b on the table and screws are match with fixation hole of stu-500b please make sure that stu-500b isn’t lifted up or stressed. It may cause of damage of inside or case. Note) if stu-500b is stressed or tight, don ’t force to fix. Please adjust height of screws again....
Page 15
Wacom co., ltd. 14 8. Replacing the pen tip the pen tip (nib) can wear with normal use. In the unlikely case that the nib gets too short or develops a sharp edge, you can replace it with spare nibs. Warning prevent children from swallowing the pen tip. The pen tip (nib) may accidentally be pulled ou...
Page 16
Wacom co., ltd. 15 9. How to install pen tether for avoiding drop or lost the pen, using the pen tether which came with the pen is recommended. A) thread the end of the pen tether through hole of pen top. And thread the other end of the pen tether through a lope of opposite pen tether end. B) thread...