Wacom STU-500B Instruction Manual - page 4
WACOM Co., Ltd.
3
Handling
WARNING
If using a power adapter with the STU-500B, only use the power adapter (Serial kit FUZ-A147) that
designed for use with the STU-500B.
If a different type of power adapter is used, the LCD signature tablet will not work properly or may be
damaged. Using a different type of power adapter also has the potential to result in fi re. Use of a different
power adapter will void your warranty.
When not using the LCD signature tablet for long periods of time, unplug the power adapter from the AC
outlet.
WARNING
High Voltage. Do not open or disassemble the STU-500B LCD signature tablet.
There is a risk of electrical shock when the casing is open. This will also void your warranty and
Wacom shall have no responsibility to repair or replace the product.
If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking from it; this liquid
is an irritant. In case of contact with skin, eyes, or mouth,
rinse immediately with running water for at least 15 minutes or more. If contact is made with the eyes or
mouth, also consult a physician.
Prevent children from swallowing the pen tip. The pen tip may accidentally be pulled out if children are
biting on them.
CAUTION
Do not disassemble the pen. This may cause the device to malfunction. In this case, Wacom shall have
no responsibility to repair or replace the product.
Do not scratch the display screen. Avoid placing sharp objects on the display screen surface.
Avoid intensive shock or vibration to the STU-500B or the pen. Hitting or dropping the LCD signature
tablet may damage the display screen or other components.
Do not put heavy articles on the LCD signature tablet or push against it with a strong force; This may
damage the display screen.
Do not place heavy articles on the STU-500B cabling, repeatedly bend the cables sharply, or apply
heavy stress to the cable connectors; this may damage the unit or cabling.
If the pen tip becomes sharp or angular, it may damage the coating on the display screen. Please
replace the pen tip if necessary.
Do not use any organic solvent (e.g., alcohol) or even mild detergent to clean the display screen.
Use of these cleaners can damage the coating on the screen.
Please note that damage of this kind is not covered by the manufacturer's warranty.
To clean the display screen, use an anti-static cloth or a slightly damp cloth. When cleaning, apply only
a light amount of pressure to the display screen and do not make the surface wet.
To clean the LCD signature tablet casing or pen, use a soft cloth with mild detergent (such as dish
washing liquid) diluted with water.
Do not expose the STU-500B to high voltage electrostatic discharges or to a build-up of an
electrostatic charge on the LCD screen. This may result in a temporary blotching of the LCD monitor. If