Waeco MyFridge MF-6W Instruction Manual - Using The Wine Refrigerator
Using the wine refrigerator
MF-6W
14
The wine refrigerator has the following buttons:
Note
You can switch the temperature display between Celsius and
Fahrenheit. To do this, press the
TEMP +
and
TEMP -
buttons
simultaneously for three seconds.
6
Using the wine refrigerator
Before you switch on your new wine refrigerator for the first time,
you should clean it inside and outside with a damp cloth for
hygienic reasons (please also refer to the the “Cleaning and
maintenance” chapter on page 16).
6.1
Energy saving tips
z
Select a well-ventilated location for the device.
z
Do not open the wine refrigerator more often than necessary.
z
Do not leave the door open for longer than necessary.
6.2
Connecting the wine refrigerator
Danger of fatal injuries!
Never handle plugs and switches if you have wet hands.
➤
Before you start up the device for the first time, verify that the operating
voltage matches the mains voltage (see type plate).
➤
Connect the device as follows:
– With the mains adapter supplied to the 100-240 V AC mains
– With the 12 V lead supplied to a 12 V socket
No. in
1
,
page 3
Description
Explanation
1
POWER
Switches the wine refrigerator on or off.
2
LIGHT
Switches the interior light on or off.
3
TEMP –
Decreases the desired cooling temperature
by 1 °C (2 °F).
4
TEMP +
Increases the desired cooling temperature
by 1 °C (2 °F).
_MF-6W.book Seite 14 Montag, 3. September 2007 4:10 16