Wagan MINI STEPPER User Manual - page 5
Mini Stepper by Wagan Tech
USER’S MANUAL — Please read before using this equipment.
________________________________________________________________________________________________________________________________________________________________
www.wagan.com
© 2005 Wagan Corporation.
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
TIME READ-OUT SPECIFICATIONS
TIME-----------------------------------------------00:00-59:59 Min
REPS/MIN----------------------------------------0-9999 Reps/Min
COUNT------------------------------------------------0-9999 Times
CALORIES-----------------------------------------------0-9999 Cal
METER FUNCTION
MODE: 1. This key allows you to select and lock on to a
particular function you want.
2. Hold the key for 3 – 4 second to have all function
values reset. (total reset)
RESET: The unit will be reset by pressing the key.
OPERATION PROCEDURES
AUTO ON/OFF:
1. The system turns on when any key is pressed orwhen it
senses an input from the speed sensor.
2. The monitor will be automatically shut off if
there is no signal in 4 or 5 minutes.
FUNCTION:
TIME:
1. Press the MODE key until the pointer advance to
TIME.
2. When the speed sensor receives any signal input, it
starts to count up.
3. It accumulates workout time when starting exercise.
REPS/MIN:
Displays current estimate repetitions per minutes during workout.
COUNT:
Displays accumulated workout steps since starting exercise
CALORIES:
1. Press the MODE key until the pointer changes to CAL.
2. When the speed sensor receives any signal input, it starts to
count up.
3. It accumulates calories consumed when starting exercise.
SCAN:
Automatic display of the following functions in the order
shown:
TIME --> CALORIES --> SPEED (REPS/MIN)
BATTERY
1. Please replace the battery if improper display appears.
2. The monitor operates on one AAA battery.