WAGNER Paint Crew 770 Owner's manual

Other manuals for Paint Crew 770: Owner's Manual
Manual is about: Superior House Painting Tool Airless Paint Sprayer

Summary of Paint Crew 770

  • Page 1

    0308 • form no. 0515801 k owner’s manual: read this manual for complete instructions guide d’utilisation : ce manuel contient des instructions détaillées manual del propietario: le este manual para obtener instrucciones completas safety information . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 2: Important Safety Information

    2 english important safety information • read all safety information before operating the equipment. Save these instructions indicates a hazardous situation which, if not avoided, could result in death or serious injury. Hazard: injection injury a high pressure paint stream produced by this equipmen...

  • Page 3: Grounding Instructions

    Hazard: general can cause severe injury or property damage. Prevention: • read all instructions and safety precautions before operating equipment. • follow all appropriate local, state, and national codes governing ventilation, fire prevention, and operation. • the united states government safety st...

  • Page 4: Components And Assembly

    4 english components and assembly on/off switch: the on/off switch turns the power to the sprayer on and off (o=off, l=on). Spray gun: the spray gun controls the delivery of the fluid being pumped. Spray hose: the spray hose connects the gun to the pump. Return tube: fluid is sent back out through t...

  • Page 5: Pressure Relief Procedure:

    5 english always lock the trigger off when attaching the spray tip or when the spray gun is not in use. Locking the spray gun the gun is secured when the trigger lock is at a 90º angle (perpendicular) to the trigger in either direction. Unlocking the spray gun to unlock the gun, turn the trigger loc...

  • Page 6: Purging and Priming

    6 english 1. Make sure the inlet filter is in place inside the hopper. If it is not, snap in place as shown. Push the tab (a) on top of the filter down once. This will ensure proper operation of the inlet valve. 2. Pull the return tube from the hopper and hold it over a waste container. Any fluids r...

  • Page 7: Tip:

    7 english good spray pattern paint tailing pattern (pressure too low, clogged tip) 1. Switch the pump on (l) . Turn the prime/spray knob to spray. 2. When motor shuts off, unlock the spray gun and spray a test area to check the spray pattern. The motor will cycle on and off automatically as it needs...

  • Page 8: Spraying Troubleshooting -

    Spraying troubleshooting - 8 english do not attempt to unclog or clean the tip with your finger. Note - do not use a needle or other sharp pointed instrument to clean the tip. The hard tungsten carbide can chip. If the spray pattern becomes distorted or stops completely while the gun is triggered, f...

  • Page 9: Cleanup

    9 english 1. Perform pressure relief procedure (page 5). 2. Remove spray tip. 3. Dump out any remaining spray material from the hopper back into its container (see emptying the hopper, page 5). 4. Fill the hopper with the appropriate cleaning solution. 5. Place a waste container next to the original...

  • Page 10: Inlet / Outlet Valves

    10 english 1. Perform pressure relief procedure, page 5. Remove spray gun from the paint hose using adjustable wrenches. 2. Remove filter (a) from spray gun (refer to unclogging the spray gun filter, page 8). Remove spray tip (b) from spray guard assembly. 3. Clean spray tip (b) and filter (a) with ...

  • Page 11: Shutdown

    11 english follow these steps when using latex materials only. If using materials that are oil-based, follow the cleanup and long- term storage steps. Shutdown 1. Perform pressure relief procedure, page 5. Unplug the sprayer. 2. Turn the prime/spray knob to prime. Switch the pump off (o) . 3. Pour 1...

  • Page 12: Troubleshooting

    Troubleshooting 12 english daily maintenance the only daily maintenance necessary is thorough cleaning. Follow the cleaning procedures in this manual. Extended maintenance some pump parts eventually wear out from use and must be replaced. The following is a list of available repair kits. Pump perfor...

  • Page 13: Title

    37 title parts list • liste de pièces • lista de piezas 4 8 5 1 3 2 7 6 sprayer • pulvérisateur • rociador 1) 0515297 handle, upper manchon mango 1 2) 0515223 hopper lid couvercle de trémie tapa del recipiente 1 3) 0515225 bolt, washer, and wing trousse de boulon, rondelle, juego de perno, rondana y...

  • Page 14: Title

    Title parts list • liste de pièces • lista de piezas optional accessories • accessoires optionnel • accesorios opciónal 0270192 25’ spray hose 25’ flexible de pulvérisation 25’ manguera del rociador 0154908 separating oil huile séparatrice lubricante de empaques 0512130w tip extension, 12” rallonge ...

  • Page 15: Title

    39 title service centers • centres de service • centros de servicio state company address city st zip number alaska ak fluid machinery 151 a st loop #1 anchorage ak 99518 907-563-5843 alaska spray center 7130 upper mesa drive palmer ak 99645 907-746-2377 alabama al e & e coatings 40 red hill road ba...

  • Page 16: Title

    40 title service centers • centres de service • centros de servicio baltimore electric 5 manila ave hamden ct 06514 203-248-7553 utility electric service 53 main street hartford ct 06106 860-246-7271 r & d services 45 old turnpike rd southington ct 06489 860-628-5205 sherwin-williams #4303 * 984 sil...

  • Page 17: Title

    41 title service centers • centres de service • centros de servicio spray fix 41318 w yellow water rd hammond la 70403 504-432-8799 robert's repair rental 4919 la 182 houma la 70364 985-872-0896 dm spray equipment 207 n cushing ave kaplan la 70548 337-643-3252 mechanical arts 600 s perkins ferry rd ...

  • Page 18: Title

    42 title service centers • centres de service • centros de servicio team compessor service 1513 dale earnhardt blvd kannaplois nc 28083 704-933-9020 djm tool 997 salem church rd lincolnton nc 28092 704-736-0671 genes service center (gsc) 801 broad creek rd new bern nc 28560 252-633-2987 j & s tool r...

  • Page 19: Title

    43 title service centers • centres de service • centros de servicio craine service center 239 dale drive kilgore tx 75662 903-984-8894 david dunn repair service 3506 34th street lubbock tx 79410 806-792-1770 universal repair 4022 englewood ave lubbock tx 79407 806-795-5850 powers spray equipment co....

  • Page 20: Title

    Title warranty • garantie • garantía limited warranty airless paint spray equipment this product, manufactured by wagner spray tech corporation (wagner), is warranted to the original retail purchaser against defects in material and workmanship for one year from date of purchase. This warranty does n...