1. DL manuals
  2. WAGO
  3. Transmitter
  4. I/O-SYSTEM 750
  5. Manual

WAGO I/O-SYSTEM 750 Manual

Other manuals for I/O-SYSTEM 750: Manual, Manual, User Manual, Manual, User Manual, Manual, User Manual, Manual
Manual is about: Fieldbus Independent I/O Modules Bluetooth RF Transceiver

Summary of I/O-SYSTEM 750

  • Page 1

    Wago-i/o-system 750 manual 750-8208(/xxx-xxx) pfc200 cs 2eth rs can dpm plc - controller pfc200 version 1.1.0, valid from fw version 02.06.20(09).

  • Page 2

    2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) © 2017 wago kontakttechnik gmbh & co. Kg all rights reserved. Wago kontakttechnik gmbh & co. Kg hansastraße 27 d-32423 minden phone: +49 (0) 571/8 87 – 0 fax: +49 (0) 571/8 87 – 1 69 e-m...

  • Page 3: Table Of Contents

    Wago-i/o-system 750 table of contents 3 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table of contents 1 notes about this documentation ............................................................... 15 1.1 validity of this documentation ..................

  • Page 4

    4 table of contents wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.8.5 programming ...................................................................................... 51 3.8.6 internal data bus .......................................

  • Page 5

    Wago-i/o-system 750 table of contents 5 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 6 connect devices ......................................................................................... 79 6.1 connecting a conductor to the cage clamp ® .............

  • Page 6

    6 table of contents wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.12.1 “user filter” group ................................................................. 114 7.6.1.12.2 “user filter n” group .....................................

  • Page 7

    Wago-i/o-system 750 table of contents 7 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.28.1 “tftp server” group ............................................................. 137 7.6.1.29 “dhcp configuration” page .......................................

  • Page 8

    8 table of contents wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.4.2 “host/domain name” > “hostname” submenu ..................... 164 7.6.4.4.3 “host/domain name” > “domain name” submenu .............. 164 7.6.4.4.4 “networkin...

  • Page 9

    Wago-i/o-system 750 table of contents 9 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11.15 “ports and services” > “plc runtime services” submenu ... 195 7.6.4.11.16 “plc runtime services” > “codesys 2” submenu ........... 196 7.6.4.11.17 “…” > “fi...

  • Page 10

    10 table of contents wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.10 memory settings in codesys ............................................................ 250 8.10.1 program memory....................................................

  • Page 11

    Wago-i/o-system 750 table of contents 11 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.5.5 register 0x1104 – watchdog operation mode ................................ 285 9.5.6 modbus constants registers ....................................................

  • Page 12

    12 table of contents wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.1.2.2 profibus master dp parameters ............................................. 344 11.1.2.3 profibus master bus parameters .........................................

  • Page 13

    Wago-i/o-system 750 table of contents 13 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.1.4 2 channel digital input module with diagnostics and output process data ................................................................................. 399 ...

  • Page 14

    14 table of contents wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.6.1 system modules with diagnostics ............................................... 426 15.1.6.2 binary space module ................................................

  • Page 15: 1.1

    Wago-i/o-system 750 notes about this documentation 15 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 1 notes about this documentation always retain this documentation! This documentation is part of the product. Therefore, retain the documentation during t...

  • Page 16: 1.3

    16 notes about this documentation wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 1.3 symbols personal injury! Indicates a high-risk, imminently hazardous situation which, if not avoided, will result in death or serious injury. Personal...

  • Page 17

    Wago-i/o-system 750 notes about this documentation 17 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) additional information: refers to additional information which is not an integral part of this documentation (e.G., the internet)..

  • Page 18: 1.4

    18 notes about this documentation wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 1.4 number notation table 2: number notation number code example note decimal 100 normal notation hexadecimal 0x64 c notation binary '100' '0110.0100' in ...

  • Page 19: Important Notes

    Wago-i/o-system 750 important notes 19 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 2 important notes this section includes an overall summary of the most important safety requirements and notes that are mentioned in each individual section. To protect ...

  • Page 20: 2.1.4

    20 important notes wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) appropriate housing (per 2014/34/eu) is required when operating the wago- i/o-system 750 in hazardous environments. Please note that a prototype test certificate must be...

  • Page 21: 2.2

    Wago-i/o-system 750 important notes 21 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 2.2 safety advice (precautions) for installing and operating purposes of the relevant device to your system the following safety precautions shall be observed: do not wo...

  • Page 22

    22 important notes wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) clean only with permitted materials! Clean soiled contacts using oil-free compressed air or with ethyl alcohol and leather cloths. Do not use any contact spray! Do not u...

  • Page 23: 2.3

    Wago-i/o-system 750 important notes 23 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 2.3 licensing terms of the software package used the firmware for the “pfc200 cs 2eth rs can dpm” controller (750-8208) contains open-source software. The licence condit...

  • Page 24: Device Description

    24 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3 device description the controller 750-8208(pfc200 cs 2eth rs can dpm) is an automation device that can perform control tasks of a plc. It is suitable for mounting o...

  • Page 25

    Wago-i/o-system 750 device description 25 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) • canopen master/slave • profibus master in the controller, all input signals from the sensors are combined. After connecting the controller, all of the i/o modules o...

  • Page 26

    26 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) memory card is not included in the scope of delivery! Note, the controller is delivered without memory card. To use a memory card, you must order one separately. The ...

  • Page 27: 3.1

    Wago-i/o-system 750 device description 27 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.1 view figure 1: view of device table 4: legend for figure “view” item description see section 1 marking options (mini-wsb) --- 2 led indicators – power supply “ind...

  • Page 28

    28 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11 safe locking feature “mounting” > “inserting and removing device” 12 fieldbus connection – profibus “connections” > “profibus dp – x5 fieldbus connection” 13 field...

  • Page 29: 3.2

    Wago-i/o-system 750 device description 29 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.2 labeling the front labeling includes: - device designation - name of the display elements, connections and control elements - serial number with hardware and firm...

  • Page 30: 3.3

    30 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.3 connectors 3.3.1 data contacts/internal bus do not place the i/o modules on the gold spring contacts! Do not place the i/o modules on the gold spring contacts in ...

  • Page 31: 3.3.2

    Wago-i/o-system 750 device description 31 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.3.2 power jumper contacts/field supply risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged. Handle the i/o module carefully to prev...

  • Page 32: 3.3.3

    32 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.3.3 cage clamp ® connectors figure 5: cage clamp ® connections table 6: legend for figure “cage clamp ® connections” contact description description 1 24 v system p...

  • Page 33: 3.3.4

    Wago-i/o-system 750 device description 33 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.3.4 service interface the service interface is located behind the flap. The service interface is used for communication with wago-i/o-check and wago-ethernet-settin...

  • Page 34: 3.3.5

    34 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.3.5 network connections – x1, x2 figure 7: network connections – x1, x2 table 8: legend for figure “network connections – x1, x2” contact signal description 1 td + ...

  • Page 35: 3.3.6

    Wago-i/o-system 750 device description 35 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) kommuni kati onsanschluss 3.3.6 rs-232/rs-485 – x3 communication connection figure 8: rs-232/rs-485 – x3 communication connection table 9: legend for figure “rs-232/r...

  • Page 36

    36 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.3.6.1 operating as an rs-232 interface depending on the device type dte (e.G., pc) or dce (e.G., pfc, modem), the rs-232 signals have different data directions. Tab...

  • Page 37

    Wago-i/o-system 750 device description 37 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.3.6.2 operating as an rs-485 interface to minimize reflection at the end of the line, the rs-485 line must be terminated at both ends by a cable termination. If req...

  • Page 38: 3.3.7

    38 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.3.7 canopen – x4 fieldbus connection figure 12: canopen – x4 fieldbus connection table 11: legend for figure “canopen – x4 fieldbus connection” contact signal descr...

  • Page 39

    Wago-i/o-system 750 device description 39 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) observe permissible resistor power loss! For normal operation, 1/4 watt resistors are sufficient. In the event of a short circuit (24 v power supply to a bus line), t...

  • Page 40: 3.3.8

    40 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.3.8 profibus dp – x5 fieldbus connection figure 14: profibus dp – x5 fieldbus connection table 12: legend for figure “profibus dp – x5 fieldbus connection” contact ...

  • Page 41

    Wago-i/o-system 750 device description 41 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 15: profibus line termination based on en 50170

  • Page 42: 3.4

    42 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.4 display elements 3.4.1 power supply indicating elements figure 16: power supply indicating elements table 13: legend for figure “power supply indicating elements”...

  • Page 43: 3.4.2

    Wago-i/o-system 750 device description 43 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.4.2 fieldbus/system indicating elements figure 17: fieldbus/system indicating elements table 14: legend for figure “fieldbus/system indicating elements” description...

  • Page 44: 3.4.3

    44 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.4.3 memory card indicating elements figure 18: indicating elements, memory card slot table 15: legend for figure “indicating elements, memory card slot” description...

  • Page 45: 3.4.4

    Wago-i/o-system 750 device description 45 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.4.4 network indicating elements figure 19: indicating elements, rj-45 jacks table 16: legend for figure “indicating elements, rj-45 jacks” description color descrip...

  • Page 46: 3.5

    46 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.5 operating elements 3.5.1 operating mode switch figure 20: mode selector switch table 17: mode selector switch item activation function run latching normal mode co...

  • Page 47: 3.5.2

    Wago-i/o-system 750 device description 47 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.5.2 reset button figure 21: reset button the reset button is installed behind drilling to prevent operating errors. It is a shortstroke button with a low actuating ...

  • Page 48: 3.6

    48 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.6 slot for memory card figure 22: slot for sd memory card the slot for the sd memory card is located on the front of the housing. The memory card is locked in the e...

  • Page 49: 3.7

    Wago-i/o-system 750 device description 49 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.7 schematic diagram figure 23: schematic diagram.

  • Page 50: 3.8

    50 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.8 technical data 3.8.1 device data table 18: technical data − device data width 112 mm height (from upper edge of din 35 rail) 65 mm length 100 mm weight 257 g 3.8....

  • Page 51: 3.8.4

    Wago-i/o-system 750 device description 51 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.8.4 clock table 21: technical data – clock drift - system clock (25 °c) 20 ppm drift - rtc (25 °c) 3 ppm buffer time rtc (25 °c) 30 days 3.8.5 programming table 22:...

  • Page 52: 3.8.8

    52 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.8.8 canopen table 25: technical data – canopen canopen input and output process image max. 2000 words no direct access from fieldbus to the process image for i/o mo...

  • Page 53: 3.8.11  Connection Type

    Wago-i/o-system 750 device description 53 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.8.11 connection type table 28: technical data – field wiring wire connection cage clamp ® cross section 0.08 mm² … 2.5 mm², awg 28 … 14 stripped lengths 8 mm … 9 mm...

  • Page 54: 3.9

    54 device description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3.9 approvals more information about approvals. Detailed references to the approvals are listed in the document “overview approvals wago-i/o-system 750”, which you ca...

  • Page 55: Function Description

    Wago-i/o-system 750 function description 55 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4 function description 4.1 network 4.1.1 interface configuration the ethernet x1 and x2 interfaces of the controller are connected with an internal 3-port switch, i...

  • Page 56: 4.1.2

    56 function description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4.1.2 network security 4.1.2.1 users and passwords several groups of users are provided in the controller which can be used for various services. Default passwords ...

  • Page 57

    Wago-i/o-system 750 function description 57 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4.1.2.1.2 wbm user group wbm has its own user administration system. The users in this system are isolated from the other user groups in the system for security rea...

  • Page 58

    58 function description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4.1.2.2 web protocols for wbm access the http and https web protocols can be used to access the wbm pages for the controller. Https is preferred because it uses the...

  • Page 59

    Wago-i/o-system 750 function description 59 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) bsi guidelines on migration to tls 1.2 the german federal office for information security guidelines on migration to tls 1.2 contain “compatibility matrices” that s...

  • Page 60: 4.1.3

    60 function description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4.1.3 network configuration 4.1.3.1 host name/domain name without a host name configuration, the controller is assigned a default name which includes the last three...

  • Page 61

    Wago-i/o-system 750 function description 61 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 1. Default route if the “default” value is entered in the destination address field, a default route is defined. The destination mask field must then have the value...

  • Page 62: 4.1.4

    62 function description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4.1.4 network services 4.1.4.1 dhcp client the controller can get network parameters from an external dhcp master via the dhcp client service. The following paramet...

  • Page 63

    Wago-i/o-system 750 function description 63 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) the settings are made, for example, in the wbm via the “dhcp configuration” page. The dhcp server also passes other parameters in addition to the ip address. The fo...

  • Page 64

    64 function description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) from a linux ® command line, an editor must be used to change the file “/etc/dnsmasq.D/dnsmasq_default.Conf” to set the configuration. 4.1.4.3 dns server the contro...

  • Page 65: 4.2

    Wago-i/o-system 750 function description 65 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4.2 memory card function only use recommended memory cards! Use only the sd memory card available from wago (item no. 758-879/000- 001) as it is suitable for indust...

  • Page 66

    66 function description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) memory card access from codesys only possible with fat16, fat32 or ntfs! If the codesys user “admin” (see the section “network” > “network security” > “users and pa...

  • Page 67: 4.2.2

    Wago-i/o-system 750 function description 67 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4.2.2 data backup the controller has a backup function and a restore function. The necessary settings can be made and the functions can be executed via the wbm page...

  • Page 68

    68 function description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) only one package may be copied to the network! If you have specified “network” as the storage location, only one package may be selected for each storing process. N...

  • Page 69

    Wago-i/o-system 750 function description 69 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) file size must not exceed the size of the internal drive! Note that the amount of data in the media/sd/copy/ directory must not exceed the total size of the interna...

  • Page 70: 4.2.3

    70 function description wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4.2.3 inserting a memory card during operation the fieldbus nodes and the plc program are running. Insert a memory card during ongoing operation. During normal oper...

  • Page 71: 4.2.5

    Wago-i/o-system 750 function description 71 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4.2.5 setting the home directory for the runtime system the home directory for the runtime system is located in the controller's internal memory by default. An exis...

  • Page 72: Mounting

    72 mounting wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 5 mounting 5.1 installation position along with horizontal and vertical installation, all other installation positions are allowed. Use an end stop in the case of vertical moun...

  • Page 73

    Wago-i/o-system 750 mounting 73 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) increase the total length using a coupler module for internal data bus extension! You can increase the total length of a fieldbus node by using a 750-628 i/o module (coupler mo...

  • Page 74: 5.3

    74 mounting wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 5.3 mounting onto carrier rail 5.3.1 carrier rail properties all system components can be snapped directly onto a carrier rail in accordance with the european standard en 50022...

  • Page 75: 5.3.2

    Wago-i/o-system 750 mounting 75 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 5.3.2 wago din rails wago carrier rails meet the electrical and mechanical requirements shown in the table below. Table 35: wago din rails item no. Description 210-112 35 × 7.5...

  • Page 76: 5.5

    76 mounting wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 5.5 mounting sequence fieldbus couplers/controllers and i/o modules of the wago-i/o-system 750 are snapped directly on a carrier rail in accordance with the european standard e...

  • Page 77: 5.6

    Wago-i/o-system 750 mounting 77 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 5.6 inserting devices perform work on devices only if they are de-energized! Working on energized devices can damage them. Therefore, turn off the power supply before working o...

  • Page 78: 5.6.2

    78 mounting wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 5.6.2 inserting the i/o module 1. Position the i/o module so that the tongue and groove joints to the fieldbus coupler/controller or to the previous or possibly subsequent i/o ...

  • Page 79: Connect Devices

    Wago-i/o-system 750 connect devices 79 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 6 connect devices 6.1 connecting a conductor to the cage clamp ® the wago cage clamp ® connection is appropriate for solid, stranded and finely stranded conductors. Only...

  • Page 80: 6.2

    80 connect devices wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 6.2 power supply concept 6.2.1 fuse protection of the electronic circuit power supply only implement the electronic circuit power supply with a suitable fuse! The electr...

  • Page 81: Commissioning

    Wago-i/o-system 750 commissioning 81 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7 commissioning 7.1 determining the ip address of the host pc to ensure that the host pc can communicate with the controller via ethernet, both devices must be located in ...

  • Page 82: 7.2

    82 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.2 setting an ip address in the controller's initial state the following ip addresses are active for the ethernet interface (port x1 and port x2): table 36: default ip ad...

  • Page 83: 7.3

    Wago-i/o-system 750 commissioning 83 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.3 assigning an ip address using dhcp the controller can obtain dynamic ip addresses from a server (dhcp/bootp). In contrast to fixed ip addresses, dynamically assigned a...

  • Page 84: 7.3.1

    84 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.3.1 changing an ip address using the “cbm” configuration tool via the serial interface you can also assign a new ip address to the ethernet interfaces x1 and x2 using th...

  • Page 85

    Wago-i/o-system 750 commissioning 85 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4. In the main menu use the keyboard (arrow keys or numeric keypad) to move to and select networking and then press [enter]. Figure 32: cbm – selecting “networking” 5. In ...

  • Page 86

    86 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7. In the menu tcp/ip configuration select ip address and press [enter]. Figure 35: cbm – selecting the ip address 8. In the menu change ip address enter the new ip addres...

  • Page 87: 7.3.2

    Wago-i/o-system 750 commissioning 87 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.3.2 changing an ip address using “wago ethernet settings” the microsoft windows ® application “wago ethernet settings” is a software used to identify the controller and ...

  • Page 88

    88 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 5. Click [identify] to read in and identify the connected controller. 6. Select the “network” tab: figure 38: “wago ethernet settings” – “network” tab 7. To assign a fixed...

  • Page 89: 7.4

    Wago-i/o-system 750 commissioning 89 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.4 testing the network connection carry out a ping network function to check whether you can reach the controller at the ip address you have assigned in the network. 1. O...

  • Page 90: 7.5

    90 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.5 initiating reset functions you can initiate various reset functions using the mode selector switch and the reset button (rst). 7.5.1 warm start reset the codesys 2 app...

  • Page 91: 7.6

    Wago-i/o-system 750 commissioning 91 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6 configuration the following methods are available for configuring the controller: • access to the web-based management system via the pc using an internet browser (“co...

  • Page 92: 7.6.1

    92 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1 configuration via web-based-management (wbm) the html pages (from here on referred to as “pages”) of the web-based management are used to configure the controller. P...

  • Page 93

    Wago-i/o-system 750 commissioning 93 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) some pages of the wbm are accessible only for certain users. They are only displayed if you have logged into the wbm. You can access the login form via the “login” link. P...

  • Page 94

    94 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 41: password reminder table 38: user settings in the default state users password user user admin wago observe access rights users in wbm are authorized exclusively...

  • Page 95

    Wago-i/o-system 750 commissioning 95 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 39: access rights for wbm pages navigation wbm page user – reboot reboot controller admin package server – firmware backup firmware backup admin – firmware restore f...

  • Page 96

    96 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.2 general information about the page figure 42: wbm browser window (example) the device name is displayed in the header of the browser window. When the user has logg...

  • Page 97

    Wago-i/o-system 750 commissioning 97 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) • wbm status: this indicates whether the wbm is currently communicating with the device in the background. In other words, one or more requests have been sent and the brow...

  • Page 98

    98 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) do not power cycle the controller after changing any parameters! Some parameter changes require a controller restart for the changes to apply. Saving changes takes time. D...

  • Page 99

    Wago-i/o-system 750 commissioning 99 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.3 “status information” page the following tables explain the parameters listed on this page: 7.6.1.3.1 “controller details” group this group displays the properties ...

  • Page 100

    100 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.4 “plc runtime information” page all information about the enabled runtime system and plc program created in the programming software is provided on the “plc runtim...

  • Page 101

    Wago-i/o-system 750 commissioning 101 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.4.3 “task n” group(s) this group is only visible if codesys 2 is enabled as the runtime system. One dedicated group is displayed for each task when the plc program ...

  • Page 102

    102 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.5 “general plc runtime configuration” page the settings for the boot project created with the programming software are given on the “general plc runtime configurati...

  • Page 103

    Wago-i/o-system 750 commissioning 103 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.6 “plc webvisu” page the settings for the web visualization created in the runtime system are shown on the “plc webvisu” page. 7.6.1.6.1 “webserver configuration” g...

  • Page 104

    104 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.7 “configuration of host and domain name” page the settings for the general tcp/ip parameters are found on the “configuration of host and domain name” page. 7.6.1.7...

  • Page 105

    Wago-i/o-system 750 commissioning 105 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.8 “tcp/ip configuration” page the tcp/ip settings for the ethernet interfaces are shown on the “tcp/ip configuration” page. 7.6.1.8.1 “ip configuration (xn)” group(...

  • Page 106

    106 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.8.2 “default gateway n” groups you can configure two default gateways. The controller transmits all network data not going to a station on the local network to a de...

  • Page 107

    Wago-i/o-system 750 commissioning 107 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.8.3 “dns server” group table 51: wbm “tcp/ip configuration” page – “dns server” group parameters explanation configured: none/ dns server n the addresses of the def...

  • Page 108

    108 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.9 “ethernet configuration” page the settings for ethernet tcp/ip are located on the “ethernet configuration” page. 7.6.1.9.1 “switch configuration” group table 52: ...

  • Page 109

    Wago-i/o-system 750 commissioning 109 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 53: wbm “ethernet configuration” page – “interface xn” groups parameter explanation enabled you can enable or disable the interface. Autonegotiation on when autoneg...

  • Page 110

    110 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.10 “general firewall configuration” page 7.6.1.10.1 “global firewall parameters” group table 54: wbm “general firewall configuration” page – “global firewall parame...

  • Page 111

    Wago-i/o-system 750 commissioning 111 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.10.2 “firewall parameters interface xxx” group these settings in this group refer to the configuration of the firewall at ip level. Table 55: wbm “general firewall ...

  • Page 112

    112 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.11 “configuration of mac address filter” page you set the firewall configuration at ethernet level on this page. The “mac address filter whitelist” contains a defau...

  • Page 113

    Wago-i/o-system 750 commissioning 113 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.11.2 “mac address filter state xn” group table 57: wbm “configuration of mac address filter” page – “mac address filter state xn” group parameters explanation filte...

  • Page 114

    114 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.12 “configuration of user filter” page 7.6.1.12.1 “user filter” group table 59: wbm “configuration of user filter” page – “user filter” group parameters explanation...

  • Page 115

    Wago-i/o-system 750 commissioning 115 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.12.3 “add new user filter” group you can enter 10 filters. You only have to enter values in the fields that are to be set for the filter. At least one value must be...

  • Page 116

    116 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.13 “configuration of time and date” page the settings for date and time are shown on the “configuration of time and date” page. 7.6.1.13.1 “date on device” group ta...

  • Page 117

    Wago-i/o-system 750 commissioning 117 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.13.3 “time zone” group you can specify the appropriate time zone for your location in this group. The total number of possible time zones is over 500. A complete li...

  • Page 118

    118 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.13.4 “tz string” group in this group you can enter a time zone that is not contained in the “time zone” selection. If the controller can associate the tz string ent...

  • Page 119

    Wago-i/o-system 750 commissioning 119 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.14 “configuration of the users for the web-based management” page the settings for user administration are shown on this page. 7.6.1.14.1 “change password for selec...

  • Page 120

    120 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.15 “create bootable image” page you can create a bootable image on the “create bootable image” page. 7.6.1.15.1 "create bootable image from active partition (" grou...

  • Page 121

    Wago-i/o-system 750 commissioning 121 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) remove the memory card write protection! Because write access to the memory card is possible during the boot process, the memory card cannot be write protected when creat...

  • Page 122

    122 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.16 “configuration of serial interface rs232” page the settings for the serial interface are shown on the “configuration of serial interface rs232” page. 7.6.1.16.1 ...

  • Page 123

    Wago-i/o-system 750 commissioning 123 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.17 “configuration of service interface” page the settings for the service interface are shown on the “configuration of the service interface” page. 7.6.1.17.1 “serv...

  • Page 124

    124 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.18 “reboot controller” page the settings for the system reboot are shown on the “reboot controller” page. 7.6.1.18.1 “reboot controller” group click the [reboot] bu...

  • Page 125

    Wago-i/o-system 750 commissioning 125 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.19 “firmware backup” page you can find the controller data backup settings on the “firmware backup” page. Table 70: “firmware-backup” wbm page parameters explanatio...

  • Page 126

    126 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) no backup of the memory card! Backup from the memory card to the internal flash memory is not possible. Account for backup time generation of backup files can take severa...

  • Page 127

    Wago-i/o-system 750 commissioning 127 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.20 “firmware restore” page the settings for restoring the controller data are shown on the “firmware restore” page. Table 71: “firmware restore” wbm page parameters...

  • Page 128

    128 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) restoration only possible from internal memory! If the device was booted from the memory card, the firmware cannot be restored. Reset by restore a reset is performed when...

  • Page 129

    Wago-i/o-system 750 commissioning 129 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.21 “system partition” page the settings for specifying the partition that the system will be started from are shown on the “system partition” page. 7.6.1.21.1 “curr...

  • Page 130

    130 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.22 “mass storage” page a group containing information about the storage volume is displayed for each storage volume that is found, along with an additional group fo...

  • Page 131

    Wago-i/o-system 750 commissioning 131 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.23 “software uploads” page the settings for a device update are shown on the “software uploads” page. 7.6.1.23.1 “upload new software” group table 74: wbm “software...

  • Page 132

    132 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.24 “configuration of network services” page the settings for various services are shown on the “configuration of network services” page. Besides enabling/disabling ...

  • Page 133

    Wago-i/o-system 750 commissioning 133 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) disconnection abort on disabling if the http service is disabled, the connection to the controller can be closed. Then call up the wbm page again. 7.6.1.24.5 “https” grou...

  • Page 134

    134 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.25 “configuration of ntp client” page the settings for the ntp service are shown on the “configuration of ntp client” page. 7.6.1.25.1 “ntp client configuration” gr...

  • Page 135

    Wago-i/o-system 750 commissioning 135 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.26 “configuration of plc runtime services” page the settings for various services of the enabled runtime system are shown on the “configuration of plc runtime servi...

  • Page 136

    136 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.27 “ssh server settings” page the settings for the ssh service are shown on the “ssh server settings” page. 7.6.1.27.1 “ssh server” group table 85: wbm “ssh server ...

  • Page 137

    Wago-i/o-system 750 commissioning 137 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.28 “tftp server” page the settings for the tftp service are shown on the “tftp server” page. 7.6.1.28.1 “tftp server” group table 86: wbm “tftp server” page – “tftp...

  • Page 138

    138 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.29 “dhcp configuration” page the settings for the dhcp service are shown on the “dhcp configuration” page. 7.6.1.29.1 “dhcp configuration xn” group table 87: wbm “d...

  • Page 139

    Wago-i/o-system 750 commissioning 139 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.30 “configuration of dns service” page the settings for the dns service are shown on the “configuration of dns service” page. 7.6.1.30.1 “dns service” group table 8...

  • Page 140

    140 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.31 “modbus services configuration” page the settings for various modbus services are shown on the “modbus services configuration” page. The groups are only visible ...

  • Page 141

    Wago-i/o-system 750 commissioning 141 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.32 “configuration of general snmp parameters” page the general settings for snmp are given on the “configuration of general snmp parameters” page. 7.6.1.32.1 “gener...

  • Page 142

    142 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.33 “configuration of snmp v1/v2c parameters” page the general settings for snmp v1/v2c are shown on the “configuration of snmp v1/v2c parameters” page. 7.6.1.33.1 “...

  • Page 143

    Wago-i/o-system 750 commissioning 143 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.33.3 “trap receiver n” group(s) a dedicated group with the following information is displayed for each trap receiver: table 94: wbm “configuration of snmp v1/v2c pa...

  • Page 144

    144 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.34 “configuration of snmp v3 users” page the general settings for snmp v3 are shown on the “configuration of snmp v3 users” page. 7.6.1.34.1 “actually configured v3...

  • Page 145

    Wago-i/o-system 750 commissioning 145 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.34.3 “add new v3 user” group you can enter 10 users. Table 98: wbm “configuration of snmp v3 users” page – “add new v3 user” group parameters explanation security a...

  • Page 146

    146 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.35 “diagnostic information” page the settings for displaying diagnostic messages are shown on the “diagnostic information” page. Table 99: wbm “diagnostic informati...

  • Page 147

    Wago-i/o-system 750 commissioning 147 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.36 “configuration of openvpn and ipsec” page the general settings for snmp v1/v2c are shown on the “configuration of snmp v1/v2c parameters” page. 7.6.1.36.1 “openv...

  • Page 148

    148 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) to transfer the selected file from the controller to the pc, click [start download] button. The changes only take effect after restarting the controller. For this purpose...

  • Page 149

    Wago-i/o-system 750 commissioning 149 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.1.37 “security settings” page the network security settings are found on the “security settings” page. 7.6.1.37.1 “tls configuration” group table 105: “security setti...

  • Page 150: 7.6.2

    150 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.2 “open source licenses” page the licence conditions for the open source software used for the controller are listed in alphabetical order on the “open source license...

  • Page 151: 7.6.3

    Wago-i/o-system 750 commissioning 151 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.3 “wago licenses” page the licence conditions for the wago software used in the controller are listed on the “wago licenses” page..

  • Page 152: 7.6.4

    152 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4 configuration using a terminal program (cbm) you can use the console-based management tool (cbm) to configure the controller via the ethernet interface and ssh, as ...

  • Page 153

    Wago-i/o-system 750 commissioning 153 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 106: cbm menu structure menu hierarchy 1. Host-/domain name 2. Tcp/ip 0. Back to networking menu 1. Ip address 2. Default gateway 3. Dns server 3. Ethernet 0. Back ...

  • Page 154

    154 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 106: cbm menu structure menu hierarchy 1. Update script 10. Ports and services 0. Back to main menu 1. Telnet 2. Ftp 3. Ftps 4. Http 5. Https 6. Ntp 7. Ssh 8. Tftp ...

  • Page 155

    Wago-i/o-system 750 commissioning 155 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.2 “information” menu this menu contains other submenus with information on the controller and network. Table 107: “information” menu menu item explanation 0. Back t...

  • Page 156

    156 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.2.2 “information” > “network details” submenu in this submenu, the network and interface properties of the controller are displayed. If the ehernet interfaces are o...

  • Page 157

    Wago-i/o-system 750 commissioning 157 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.3 “plc runtime” menu this menu contains other submenus with information and settings for the runtime system. Table 110: “plc runtime” menu menu item explanation 0. ...

  • Page 158

    158 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.3.2 “information” > “runtime version” submenu in this submenu, the runtime version is displayed. Table 112: “plc runtime” > “information” > “runtime version” submen...

  • Page 159

    Wago-i/o-system 750 commissioning 159 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.3.5 “information” > “number of tasks” submenu in this submenu, the number of tasks in the plc program are displayed. The submenu only appears when codesys 2 is enab...

  • Page 160

    160 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.3.8 “tasks” > “task n” submenu in this submenu, information on the selected task is displayed. The submenu only appears when codesys 2 is enabled as the runtime sys...

  • Page 161

    Wago-i/o-system 750 commissioning 161 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.3.10 “general configuration” > “plc runtime version” submenu in this submenu, select which plc runtime system is enabled. Table 120: “plc runtime” > “general config...

  • Page 162

    162 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.3.12 “plc runtime” > “webvisu” submenu this submenu contains information and settings for the web visualization. Table 122: “plc runtime” > “webvisu” submenu menu i...

  • Page 163

    Wago-i/o-system 750 commissioning 163 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.4 “networking” menu this menu contains other submenus with settings for the network configuration. Table 123: “networking” menu parameters explanation 0. Back to … ...

  • Page 164

    164 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.4.2 “host/domain name” > “hostname” submenu in this submenu, you can set the hostname of the controller. Table 125: “networking” > “hostname” submenu parameters exp...

  • Page 165

    Wago-i/o-system 750 commissioning 165 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.4.5 “tcp/ip” > “ip address” submenu this submenu contains other submenus with settings for the ethernet interfaces. The submenu only appears if the controller is op...

  • Page 166

    166 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.4.7 “tcp/ip” > “default gateway” submenu this submenu contains other submenus with settings for the default gateway. Table 130: “networking” > “tcp/ip” > “default g...

  • Page 167

    Wago-i/o-system 750 commissioning 167 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.4.9 “tcp/ip” > “dns server” submenu this submenu contains the settings for the dns server. Table 132: “networking” > “tcp/ip” > “dns server” submenu menu item subme...

  • Page 168

    168 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.4.11 “ethernet” > “switch configuration” submenu this submenu contains the settings for the switch configuration. Table 134: “networking” > “ethernet” > “switch con...

  • Page 169

    Wago-i/o-system 750 commissioning 169 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.4.13 “ethernet ports” > “interface xn” submenu this submenu contains the settings for the selected ethernet interface. Table 136: “networking” > “ethernet” > “ether...

  • Page 170

    170 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.5 “firewall” menu this menu contains other submenus for the firewall functionality settings. Table 137: “firewall” menu menu item explanation 0. Back to … back to t...

  • Page 171

    Wago-i/o-system 750 commissioning 171 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.5.1 “firewall” > “general configuration” submenu this submenu contains the general settings for the firewall. Table 138: “firewall” > “general configuration” submen...

  • Page 172

    172 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.5.2 “general configuration” > “interface xxx” submenu this submenu contains the firewall settings on the ip level for the selected interface. Table 139: “firewall” ...

  • Page 173

    Wago-i/o-system 750 commissioning 173 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) click [] to apply the entry. Click [] to discard the entry..

  • Page 174

    174 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.5.3 “firewall” > “mac address filter” submenu this submenu contains the settings for the mac address filter. Table 140: “firewall” > “mac address filter” submenu me...

  • Page 175

    Wago-i/o-system 750 commissioning 175 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.5.4 “mac address filter” > “mac address filter whitelist” submenu this submenu displays all available filter entries. Table 141: “firewall” > “mac address filter” >...

  • Page 176

    176 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.5.6 “firewall” > “user filter” submenu this submenu displays all available filter entries. Table 143: “firewall” > “user filter” submenu menu item explanation 0. Ba...

  • Page 177

    Wago-i/o-system 750 commissioning 177 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.5.7 “user filter” > “add new / no (n)” submenu in this submenu, you can create, change or delete filter entries. Table 144: “firewall” > “user filter” > “add new / ...

  • Page 178

    178 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.6 “clock” menu this menu contains other submenus for the date and time settings. Table 145: “clock” menu menu item submenu item / explanation 0. Back to … back to t...

  • Page 179

    Wago-i/o-system 750 commissioning 179 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.7 “administration” menu this menu contains settings for controller administration. Table 146: “administration” menu menu item submenu item / explanation 0. Back to ...

  • Page 180

    180 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.7.1 “administration” > “create image” submenu this submenu contains the selection for creating the image. In addition to the menu item for the enabled storage mediu...

  • Page 181

    Wago-i/o-system 750 commissioning 181 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.8 “package server” menu this menu contains other submenus with functions for firmware backup and restore, as well as information and setting options for the current...

  • Page 182

    182 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.8.2 “firmware backup” > “auto update feature” submenu this submenu contains a setting option for the auto update function. The submenu only appears if the data for ...

  • Page 183

    Wago-i/o-system 750 commissioning 183 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.8.4 “package server” > “firmware restore” submenu this submenu contains a selection option for the restore source drive. In addition to the enabled partition, the c...

  • Page 184

    184 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.8.6 “package server” > “system partition” submenu this submenu contains information and setting options for the current system partition. Table 155: “package server...

  • Page 185

    Wago-i/o-system 750 commissioning 185 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.9 “mass storage” menu this menu contains information on the internal flash memory and, if inserted, on the external memory card. In addition to the menu item, the s...

  • Page 186

    186 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.10 “software uploads” menu this menu contains choices and settings for the device update. You can select fieldbus software, program licenses and update scripts, for...

  • Page 187

    Wago-i/o-system 750 commissioning 187 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11 “ports and services” menu this submenu contains other submenus with settings for the respective services. Table 158: “ports and services” menu menu item explanat...

  • Page 188

    188 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11.1 “ports and services” > “telnet” submenu this submenu contains the settings for the telnet service. Table 159: “ports and services” > “telnet” submenu menu item...

  • Page 189

    Wago-i/o-system 750 commissioning 189 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11.3 “ports and services” > “ftps” submenu this submenu contains the settings for the ftps service. Table 161: “ports and services” > “ftps” submenu menu item subme...

  • Page 190

    190 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11.5 “ports and services” > “https” submenu this submenu contains the settings for the https service. Table 163: “ports and services” > “https” submenu menu item su...

  • Page 191

    Wago-i/o-system 750 commissioning 191 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11.7 “ports and services” > “ssh” submenu this submenu contains the settings for the ssh service. Table 165: “ports and services” > “ssh” submenu menu item submenu ...

  • Page 192

    192 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11.9 “ports and services” > “dhcpd” submenu this submenu contains the settings for the dhcpd service. Table 167: “ports and services” > “dhcpd” submenu menu item ex...

  • Page 193

    Wago-i/o-system 750 commissioning 193 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11.11 “ports and services” > “dns” submenu this submenu contains the settings for the dns service. Table 169: “ports and services” > “dns” submenu menu item submenu...

  • Page 194

    194 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11.12 “ports and services” > “iocheck port” submenu this submenu contains settings for the wago-i/o-check port. Table 170: “ports and services” > “iocheck port” sub...

  • Page 195

    Wago-i/o-system 750 commissioning 195 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11.14 “ports and services” > “modbus udp” submenu this submenu contains the settings for the modbus udp service. Table 172: “ports and services” > “modbus udp” subm...

  • Page 196

    196 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11.16 “plc runtime services” > “codesys 2” submenu this submenu contains the settings for the codesys 2 service. Table 174: “ports and services” > “plc runtime serv...

  • Page 197

    Wago-i/o-system 750 commissioning 197 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.11.17 “…” > “firewall status” submenu this submenu contains firewall settings for the selected service. Table 175: “ports and services” > “firewall status” submenu ...

  • Page 198

    198 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.12 “snmp” menu this menu contains other submenus with the snmp settings. Table 176: “snmp” menu parameters explanation 0. Back to … back to the higher-level menu 1....

  • Page 199

    Wago-i/o-system 750 commissioning 199 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.12.2 “snmp” > “snmp v1/v2c manager configuration” submenu this submenu contains the snmp v1/v2c manager settings. Table 178: “snmp” > “snmp v1/v2c manager configura...

  • Page 200

    200 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.12.4 “snmp” > “snmp v3 configuration” submenu this submenu contains settings for snmp v3. Table 180: “snmp” > “snmp v3 configuration” submenu parameters explanation...

  • Page 201

    Wago-i/o-system 750 commissioning 201 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.4.12.5 “snmp” > “(secure)snmp firewalling” submenu these submenus contain the snmp firewall settings. Table 181: “snmp” > “(secure )snmp firewalling” submenu menu ite...

  • Page 202: 7.6.5

    202 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.5 configuration using “wago ethernet settings” the “wago ethernet settings” program enables you to read system information about your controller, make network setting...

  • Page 203

    Wago-i/o-system 750 commissioning 203 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 46: “wago ethernet settings” – communication link once you have configured “wago ethernet settings” and have clicked [ok], connection to the controller is establis...

  • Page 204

    204 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.5.1 identification tab an overview of the connected device is given here. Besides some fixed values — e.G., item no., mac address and firmware version — the currently...

  • Page 205

    Wago-i/o-system 750 commissioning 205 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.5.2 network tab this tab is used to configure network settings. Values can be changed in the “input” column, while the parameters in use are shown in the “currently i...

  • Page 206

    206 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) this name is composed of the string “pfcx00” and the last three bytes of the mac address. This standard value is also used whenever the chosen name in the “input” column ...

  • Page 207

    Wago-i/o-system 750 commissioning 207 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.5.3 protocol tab figure 49: “wago ethernet settings” – protocol tab you can enable or disable the web server..

  • Page 208

    208 commissioning wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7.6.5.4 status tab figure 50: “wago ethernet settings” – status tab general information about the controller status is displayed here. The bus extension check box has no ...

  • Page 209: 8.1

    Wago-i/o-system 750 run-time system codesys 2.3 209 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8 run-time system codesys 2.3 observe codesys version a codesys version higher than or equal to 2.3.9.49 is required for operation of the controllers “pfc20...

  • Page 210: 8.2.2

    210 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.2.2 creating a project and selecting the target system 1. In the menu bar click on file and select new. The “target system settings” window then opens. He...

  • Page 211: 8.2.3

    Wago-i/o-system 750 run-time system codesys 2.3 211 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 5. In this “new component” window create a new program function block. In the example shown here, the new function block “plc_prg” is created in the “st” pr...

  • Page 212

    212 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 55: “resources” tab 2. In the left window double-click on “plc configuration”. The plc configuration for the controller opens..

  • Page 213

    Wago-i/o-system 750 run-time system codesys 2.3 213 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3. Right-click on the entry “k-bus[fix]” and then select “edit” in the contextual menu. The “configuration” dialog window then opens. Figure 56: control con...

  • Page 214

    214 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 5. Wago-i/o-check is started. Figure 58: wago-i/o-check – starting screen 6. To connect to the controller and read in the module configuration, click [ident...

  • Page 215

    Wago-i/o-system 750 run-time system codesys 2.3 215 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8. The detected i/o modules then appear in the configuration window. Passive i/o modules remember that passive i/o modules, such as a power supply module (7...

  • Page 216

    216 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10. You can select a module in the new “module selection” window that then appears. Figure 61: “module selection” window 11. You can change the position of ...

  • Page 217

    Wago-i/o-system 750 run-time system codesys 2.3 217 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 13. To close the i/o configurator, click [ok]. 14. The individual inputs and outputs of the selected i/o module are displayed in the right half of the confi...

  • Page 218: 8.2.4

    218 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.2.4 editing the program function block to edit the plc_prg program function block, go to the “function block” tab and double-click on the plc_prg program ...

  • Page 219

    Wago-i/o-system 750 run-time system codesys 2.3 219 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4. Repeat step 2 for the “input_1” variable. Figure 67: example of an allocation 5. To compile, click on project > compile all in the menu bar..

  • Page 220: 8.2.5

    220 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.2.5 loading and running the plc program in the fieldbus controller (ethernet) requirement: - the simulation is deactivated (online > simulation). - the pc...

  • Page 221

    Wago-i/o-system 750 run-time system codesys 2.3 221 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3. In the “name” field enter a designation for your fieldbus controller and then click on “tcp/ip (level 2 route)”. Then click [ok]. Figure 69: creating a c...

  • Page 222: 8.2.6

    222 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.2.6 creating a boot project create a boot project to ensure that the plc program starts automatically again after a fieldbus controller restart. In the me...

  • Page 223: 8.4

    Wago-i/o-system 750 run-time system codesys 2.3 223 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) enter the character string of the absolute address without empty spaces. The first bit of a word has an address of 0. 8.4 creating tasks set the time respon...

  • Page 224

    224 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3. To assign a new name to the task (e.G. Plc_prog), click on “new task”. Then select the type of task. In this example, this is the “cyclic” type. Observe ...

  • Page 225

    Wago-i/o-system 750 run-time system codesys 2.3 225 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4. Add the program module plc_prg that you have just created (see section “editing the program modules”). To do this, right-clock on the “clock” symbol and ...

  • Page 226: 8.4.1

    226 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.4.1 cyclic tasks you can assign a priority for each task in order to establish the task processing sequence. Figure 74: cyclic task order of task processi...

  • Page 227: 8.4.2

    Wago-i/o-system 750 run-time system codesys 2.3 227 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) these tasks all receive the same computing time from the operating system (“completely fair scheduler” procedure). 8.4.2 freewheeling tasks so-called freewh...

  • Page 228

    228 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 76: debugging (case 1) figure 77: debugging (case 2).

  • Page 229

    Wago-i/o-system 750 run-time system codesys 2.3 229 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) if the mode selector switch and the stop function of the user interface are used simultaneously, the mode selector switch has priority (case 3 and case 4). ...

  • Page 230

    230 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) as soon as a task is located at a breakpoint, only all other tasks can be controlled with the mode selector switch. Exception: if the mode selector switch i...

  • Page 231: 8.5

    Wago-i/o-system 750 run-time system codesys 2.3 231 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) if a task is at a breakpoint and the connection to the ide is broken (e.G., by logging out), all breakpoints are deleted. The debug task stays at the curren...

  • Page 232

    232 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 83: codesys – system events do not set debug points in the event handlers! Debug points in event handlers can lead to unforeseeable errors and must t...

  • Page 233

    Wago-i/o-system 750 run-time system codesys 2.3 233 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) the following events can be activated: table 183: events name description start the event is called directly after the user program starts. Stop the event i...

  • Page 234: 8.5.1

    234 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.5.1 creating an event handler the example here is provided to illustrate how to define and use an event handler. The event handler “excpt_dividebyzero” is...

  • Page 235

    Wago-i/o-system 750 run-time system codesys 2.3 235 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 86: codesys – new module has been generated handling for the event that has occurred is now programmed in this new function. In the example here, the...

  • Page 236

    236 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 88: codesys – variable contents prior to division by “0” figure 89: codesys – variable contents after division by “0” and call-up of the event handle...

  • Page 237: 8.6

    Wago-i/o-system 750 run-time system codesys 2.3 237 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.6 process images a process image is a memory area in which the process data is stored in a defined sequence and consists of the i/o modules attached to th...

  • Page 238

    238 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 90: process image.

  • Page 239: 8.6.1

    Wago-i/o-system 750 run-time system codesys 2.3 239 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 91: flag area 8.6.1 process images for i/o modules connected to the controller after starting the fieldbus controller, it automatically detects all c...

  • Page 240: 8.6.2

    240 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) i/o module data width the data width of an i/o module is between 0 and 48 bytes. I/o module process data check the i/o module process data whenever you add ...

  • Page 241

    Wago-i/o-system 750 run-time system codesys 2.3 241 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 185: access to the process images of the input and output data – modbus memory area description access via plc logical address space modbus input proc...

  • Page 242: 8.8

    242 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 188: access to the process images of the input and output data – flags memory area description access via plc logical address space flag variables tot...

  • Page 243: 8.9

    Wago-i/o-system 750 run-time system codesys 2.3 243 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 190: addressing example i/o module input data output data description type c * 2 %qx4.1 1. Digital output module with a data width of 4 bits. As the a...

  • Page 244

    244 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) internal data bus and the output values are also set at the module after each codesys task. Figure 92: internal data bus synchronization 01 cti: codesys tas...

  • Page 245: 8.9.2

    Wago-i/o-system 750 run-time system codesys 2.3 245 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.9.2 case 2: codesys task interval smaller than twice the internal data bus cycle execution of the internal data bus is synchronized with the set codesys t...

  • Page 246: 8.9.3

    246 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.9.3 case 3: codesys task interval greater than twice the internal data bus cycle the i/o data from the internal data bus are refreshed once prior to the c...

  • Page 247: 8.9.4

    Wago-i/o-system 750 run-time system codesys 2.3 247 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.9.4 case 4: codesys task interval greater than 10 ms synchronization takes place as in case 3; however, the output modules would be reset to their default...

  • Page 248: 8.9.5

    248 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.9.5 internal data bus configuration figure 96: internal data bus settings.

  • Page 249

    Wago-i/o-system 750 run-time system codesys 2.3 249 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 191: internal data bus settings parameter explanation update mode the update mode is used to configure how the internal data bus process data is to be...

  • Page 250: 8.10.1  Program Memory

    250 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.9.5.1.2 synchronous update mode in the synchronous update mode the runtime behavior of codesys tasks can be influenced by the internal data bus. The minim...

  • Page 251

    Wago-i/o-system 750 run-time system codesys 2.3 251 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 97: program memory (example).

  • Page 252

    252 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.10.2 data memory and function block limitation the data memory is set for 64 mbytes in the controller's initial state. This set value has already been req...

  • Page 253: 8.10.3  Remanent Memory

    Wago-i/o-system 750 run-time system codesys 2.3 253 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.10.3 remanent memory a total of 128 kbytes of remanent memory is available for the iec-61131 application. The remanent section is subdivided into the flag...

  • Page 254

    254 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.11 general target system settings figure 101: general target system settings no change to the settings is necessary on the “general” tab. The “update unus...

  • Page 255

    Wago-i/o-system 750 run-time system codesys 2.3 255 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 102: selecting the visualization technique in the target system settings.

  • Page 256

    256 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 2. Generate a start page for the visualization. Right-click the “visualization” folder in the “visualization” tab. Select add object ... From the contextual...

  • Page 257

    Wago-i/o-system 750 run-time system codesys 2.3 257 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) frequently asked questions additional information (faqs) on codesys web visualization is also provided in the section “frequently asked questions about code...

  • Page 258

    258 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) network load the controller's cpu processes both the plc program and network traffic. Ethernet communication demands that each received telegram is processe...

  • Page 259

    Wago-i/o-system 750 run-time system codesys 2.3 259 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.12.2 eliminating errors in codesys web visualization if you are experiencing problems when working with the codesys web visualization, use the following t...

  • Page 260

    260 run-time system codesys 2.3 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 8.12.3 faqs about codesys web visualization how can i optimize the applet for special screen resolutions? In order to optimize the web visualization for dis...

  • Page 261

    Wago-i/o-system 750 run-time system codesys 2.3 261 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) why does the visualization element “trend” in the web visualization only work “online”? The following settings must be selected for visualization projects: ...

  • Page 262: Modbus – Codesys 2

    262 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9 modbus – codesys 2 9.1 general modbus is a non-vendor-specific, open fieldbus standard for a wide range of applications in production and process automation. The m...

  • Page 263: 9.3

    Wago-i/o-system 750 modbus – codesys 2 263 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.3 configuration all of the modbus operating modes are configured using the codesys plc configuration. Figure 104: codesys plc configuration - modbus settings the m...

  • Page 264: 9.3.1

    264 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.3.1 modbus settings the “modbus settings” group contains the following configuration parameters. Table 193: modbus settings parameters explanation plc stop behavio...

  • Page 265: 9.3.2

    Wago-i/o-system 750 modbus – codesys 2 265 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.3.2 modbus tcp settings the “modbus tcp settings” contains the following configuration parameters for the “modbus tcp” mode: table 194: modbus tcp settings paramet...

  • Page 266

    266 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 196: modbus rtu settings parameters explanation rtu mode enable for the modbus rtu mode off * operation not permitted active operation possible device id devic...

  • Page 267

    Wago-i/o-system 750 modbus – codesys 2 267 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 196: modbus rtu settings parameters explanation flow control data flow control (supported only for the setting “rs-232” for the physical interface.) none * no ...

  • Page 268: 9.4

    268 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.4 data exchange modbus data exchange is performed in cycles or acyclically using modbus services. The type and number of usable modbus services depends on the area...

  • Page 269: 9.4.1

    Wago-i/o-system 750 modbus – codesys 2 269 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.4.1 process image the main data interfaces between the plc and the modbus slave are the local modbus process images in the plc address area based on iec 61131. The...

  • Page 270: 9.4.2

    270 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.4.2 flag area modbus can also exchange data and fieldbus variables with the plc via the flag area. Caution is urged, however, when using data and/or variables in t...

  • Page 271: 9.4.3

    Wago-i/o-system 750 modbus – codesys 2 271 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.4.3 modbus registers wago-specific registers are implemented in the last modbus-relevant address area; this simplifies the reading of certain system and modbus inf...

  • Page 272

    272 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.4.4.2 modbus mapping for write bit services fc5, fc15 the table below outlines the mapping for the modbus-writing, bit-oriented services: • fc5 – write single coil...

  • Page 273

    Wago-i/o-system 750 modbus – codesys 2 273 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.4.4.3 modbus mapping for read register services fc3, fc4, fc23 the table below outlines the mapping for the modbus-reading, register-oriented services: • fc3 – rea...

  • Page 274

    274 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 199: modbus mapping for read register services fc3, fc4, fc23 modbus address (hexadecimal values in parentheses) iec 61131 address description 12288 … 65535 (0...

  • Page 275

    Wago-i/o-system 750 modbus – codesys 2 275 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.4.4.4 modbus mapping for write register services fc6, fc16, fc22, fc23 the table below outlines the mapping for modbus-writing, register-oriented services. • fc6 –...

  • Page 276

    276 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 200: modbus mapping for write register services fc6, fc16, fc22, fc23 modbus address (hexadecimal values in parentheses) iec 61131 address description 12288 … ...

  • Page 277: 9.5

    Wago-i/o-system 750 modbus – codesys 2 277 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.5 wago modbus registers system and modbus data can be read and some modbus parameters configured using the wago modbus registers. The following table lists all of ...

  • Page 278: 9.5.1

    278 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 201: wago modbus registers modbus address data length in words access description dec. Hex. 8197 0x2005 1 ro 0x7fff (constant) 8198 0x2006 1 ro 0x8000 (constan...

  • Page 279: 9.5.2

    Wago-i/o-system 750 modbus – codesys 2 279 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.5.2 network configuration 9.5.2.1 register 0x1028 – ip configuration this register contains information about the set ip configuration. Possible values: 1 = bootp ...

  • Page 280: 9.5.3

    280 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.5.3 plc status register register 0x1040 provides the status (state) that the controller is currently in. Possible values: 1 = plc running − plc status is running. ...

  • Page 281

    Wago-i/o-system 750 modbus – codesys 2 281 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 108: state diagram, alternative_watchdog operation mode the state diagram for the alternative_watchdog operation mode shows that the watchdog is always active...

  • Page 282

    282 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 109: state diagram, switchover operation mode 9.5.4.1 register 0x1100 – watchdog command this register receives commands for the modbus watchdog. It cannot be...

  • Page 283

    Wago-i/o-system 750 modbus – codesys 2 283 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 202: watchdog commands value name explanation 0x5555 watchdog_ start starts the configured watchdog; in the watchdog_unconfigured state if no timeout is config...

  • Page 284

    284 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.5.4.2 register 0x1101 – watchdog status this register provides the current state of the modbus watchdog. The following states are possible: table 203: watchdog sta...

  • Page 285: 9.5.5

    Wago-i/o-system 750 modbus – codesys 2 285 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) the register can be read and written in the states watchdog_unconfigured, watchdog_stopped and watchdog_expired. However, if the watchdog is active (watchdog_running...

  • Page 286: 9.5.6

    286 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 205: watchdog operation modes value name explanation 0x0000 standard_ watchdog “standard watchdog” operation mode; the watchdog must be controlled explicitly v...

  • Page 287

    Wago-i/o-system 750 modbus – codesys 2 287 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.5.6.5 register 0x2013 – major firmware version this register provides the major part for the firmware version. 9.5.6.6 register 0x2014 – minor firmware version thi...

  • Page 288: 9.6

    288 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 9.6 diagnostics 9.6.1 diagnostics for the modbus master the status of the plc, or of the control system, can be queried by the modbus master by reading the wago-spec...

  • Page 289

    Wago-i/o-system 750 modbus – codesys 2 289 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 206: diagnostics for the error server diagnostics id diagnostic text method of saving explanation 0x00090006 modbus slave udp start failed permanent starting t...

  • Page 290

    290 modbus – codesys 2 wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 206: diagnostics for the error server diagnostics id diagnostic text method of saving explanation 0x00090108 modbus slave rtu configuration in rs-485 mode fail...

  • Page 291: Canopen Master And Slave

    Wago-i/o-system 750 canopen master and slave 291 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10 canopen master and slave based on iec 61131-3 programming, data processing occurs on site in the controller. The process results can be output directly to t...

  • Page 292

    292 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.2 communications profile 0x1000 device type the stack responds on the bus as the ds-405 device (iec 61131-3 programmable device), regardless of being config...

  • Page 293

    Wago-i/o-system 750 canopen master and slave 293 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 0x1009 manufacturer hardware version entry: “v 1.0” or higher 0x100a manufacturer software version entry: “v 1.00” or higher 0x100c node guarding time the obje...

  • Page 294

    294 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 0x1016h consumer heartbeat time this entry can be used for monitoring of other devices on the bus. A check is made to determine whether each module defined in ...

  • Page 295

    Wago-i/o-system 750 canopen master and slave 295 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 0x1018h identity this object specifies the device being used. The manufacturer id contains a unique number for each vendor. Wago has been assigned an id of 33....

  • Page 296

    296 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.2.1 master configuration these objects are only available at the bus end when the master has been configured. 0x102a nmt inhibit time this object indicates ...

  • Page 297

    Wago-i/o-system 750 canopen master and slave 297 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 0x1f85 vendor identification sub-index 0: 127 = number of possible entries sub-index 1 … 127: slave device type (not used by default) 0x1f86 product code sub-i...

  • Page 298: 10.3  Data Exchange

    298 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.3 data exchange process data exchange occurs via the communication objects with the canopen fieldbus controller. Each object consists of a can telegram with...

  • Page 299

    Wago-i/o-system 750 canopen master and slave 299 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) as canopen does not transfer data by bits, the variable data is combined from a boolean data type to bytes and assigned to the corresponding index; boolean inp...

  • Page 300

    300 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) in contrast, when the indices for larger data blocks are used, several bytes can be accessed simultaneously. For example, the described pfc output variable dat...

  • Page 301

    Wago-i/o-system 750 canopen master and slave 301 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 110: correlation between “iec 61131-3” variables and pfc variables.

  • Page 302

    302 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.3.3 examples for the definition of pfc fieldbus variables the examples below show the allocation of several definitions for pfc variables with different dat...

  • Page 303

    Wago-i/o-system 750 canopen master and slave 303 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.3.3.2 maximum indices the maximum indices and sub-indices are yielded from the memory size of the fieldbus controller at 4000 bytes and the corresponding da...

  • Page 304

    304 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 212: example of “iec 61131-3” output variables index sub-index contents description 0xa580 1 d1 *) 1 st output variable block 2 d2 *) 2 nd output variabl...

  • Page 305

    Wago-i/o-system 750 canopen master and slave 305 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.3.4 canopen master control configuration note calling up the addresses or the symbolic name of the inputs and outputs addresses or symbolic names of the inp...

  • Page 306

    306 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.3.4.2 setting the master parameters no input should be made on the basic parameters tab. Figure 112: basic parameters tab (master) table 213: description of...

  • Page 307

    Wago-i/o-system 750 canopen master and slave 307 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) normally, you must only check the baud rate on the can parameters tab. Figure 113: can parameters tab (master) table 214: description of the can parameters (ma...

  • Page 308

    308 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 214: description of the can parameters (master) parameters explanation support ... Dsp 301 if you mark this check box, modular can slaves as well as addi...

  • Page 309

    Wago-i/o-system 750 canopen master and slave 309 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) eds files the eds files for current components of the wago-i/o-system are integrated in the target files for the controller. The associated eds files are requi...

  • Page 310

    310 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) no input must be made on the basic parameters tab. Figure 116: basic parameters tab (slave) table 216: description of basic parameters (slave) parameters expla...

  • Page 311

    Wago-i/o-system 750 canopen master and slave 311 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) normally, you must only check the node id on the can parameters tab. Figure 117: can parameters tab (slave).

  • Page 312

    312 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 217: description of the can parameters (slave) parameters explanation general node id the node id (1–126) is the station address under which the controll...

  • Page 313

    Wago-i/o-system 750 canopen master and slave 313 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 217: description of the can parameters (slave) parameters explanation heartbeat settings activate heartbeat generation if the “heartbeat generation” opti...

  • Page 314

    314 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) you can now select the installed input and output modules in the can module selection tab. In the example shown here, one 8-bit input and output module each. F...

  • Page 315

    Wago-i/o-system 750 canopen master and slave 315 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.3.4.4 configuring the slave pdos now, configure the receiving pdos for the slave (output from the perspective of the controller) and the send pdos. The pdos...

  • Page 316

    316 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 218: receiving and sending description for pdo mapping parameters explanation insert pdo depending on the i/o modules selected for the canopen slave, the...

  • Page 317

    Wago-i/o-system 750 canopen master and slave 317 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 219: description of the pdo properties window parameters explanation cob-id can identifier inhibit time (* 100 µs) here, specify the time span of a pdo t...

  • Page 318

    318 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 219: description of the pdo properties window parameters explanation event time depending on the “transmission type”, enter the time span (in ms) that sh...

  • Page 319

    Wago-i/o-system 750 canopen master and slave 319 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) the value of the objects can be changed. To do this, mark the field in question in the “value” column and overwrite the value with your input, then press [ente...

  • Page 320

    320 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) the starting parameters for the slave can now be set on the “module parameters” tab. Figure 123: “module parameters” tab (slave) table 220: description of the ...

  • Page 321

    Wago-i/o-system 750 canopen master and slave 321 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.3.5 canopen slave control configuration an application must be configured in codesys before it can access the connected can network. To add the canopen slav...

  • Page 322

    322 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.3.5.1 canopen variables configuration figure 126: configuration of the canopen slave variables canopen variables can be added by clicking the [+] (add) butt...

  • Page 323

    Wago-i/o-system 750 canopen master and slave 323 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.3.5.2 configuring of canopen parameters figure 127: configuration of canopen slave parameters table 222: description of canopen slave settings parameters ex...

  • Page 324: 10.4.1  Busdiag.Lib

    324 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.4 fieldbus coupler diagnostics this section requires substantial knowledge of the codesys programming tool. It only describes the procedure to create diagno...

  • Page 325

    Wago-i/o-system 750 canopen master and slave 325 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.4.1.1 creating diagnostics 7 in codesys 2.3 in order to execute bus diagnostics or device diagnostics for the slaves, it is necessary to integrate the busdi...

  • Page 326

    326 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3. In the menu bar, click on insert > additional library. The “open” dialog window then opens. Select the “busdiag.Lib” and click [open] to add it to the proje...

  • Page 327

    Wago-i/o-system 750 canopen master and slave 327 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 7. Call up the function block diaggetbusstate() for the slave diagnostics from the library busdiag.Lib. 8. Create an entity for the function block diaggetstate...

  • Page 328

    328 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.4.1.3 executing a bus diagnosis using diaggetbusstate() to perform bus diagnostics, proceed as follows: 1. Log into codesys. To do this, click in the menu b...

  • Page 329

    Wago-i/o-system 750 canopen master and slave 329 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 134: online view of the variable window (top window) in fup 3. The binary code facilitates the evaluation of the individual diagnostic bits. You can hav...

  • Page 330

    330 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 223: diagnostics information bits 2 nd bit 1 st bit 0 bit 1 0 1 0 1 0 diagnostics information is present at the slave. No diagnostics information is pres...

  • Page 331

    Wago-i/o-system 750 canopen master and slave 331 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.4.1.4 performing subscriber diagnostics using diaggetstate() if the bus diagnostics have revealed that an i/o module contains diagnostic information, then p...

  • Page 332

    332 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.4.1.5 evaluating the canopen diagnosis (emergency messages) the array elements [0] to [3] listed in the illustration below are reserved for the canopen stat...

  • Page 333

    Wago-i/o-system 750 canopen master and slave 333 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) description of the function block's diagnostic information diaggetstate.Extendedinfo for canopen the extendedinfo array contains the following status informati...

  • Page 334

    334 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.4.2 wagocanopendiag.Lib this library provides a function block for the user-friendly monitoring of canopen nodes. The diagnostics and emcy messages are prov...

  • Page 335

    Wago-i/o-system 750 canopen master and slave 335 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.5 data exchange between simple can subscribers and pfc200 in the canopen network the eds file “generic can device”, which has been reduced to the essentials...

  • Page 336

    336 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 2. In the “can parameters” tab, select the required baud rate. Figure 139: setting the baud rate 3. To add a slave, right-click canopen master[slot] and select...

  • Page 337

    Wago-i/o-system 750 canopen master and slave 337 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 4. Open the module parameters tab of the slave. For communication with simple can layer2 devices, deactivate transmission of the configuration to the slave wit...

  • Page 338

    338 canopen master and slave wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 10.6 data exchange between can subscribers and the pfc200 in a can layer2 network if there are only can layer2 devices in the network, the canopen functions ar...

  • Page 339: Profibus Dp-V1 Master

    Wago-i/o-system 750 profibus dp-v1 master 339 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11 profibus dp-v1 master observe codesys version a codesys version higher than or equal to 2.3.9.49 is required for operation of the controllers “pfc200 cs 2eth r...

  • Page 340

    340 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 145: adding profibus slaves gsd files the gsd files for current components of the wago-i/o-system are integrated in the target files for the controller “pf...

  • Page 341

    Wago-i/o-system 750 profibus dp-v1 master 341 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 5. Click [delete] to delete any i/o modules you may have added in error. The example below shows a digital input module (750-430) and a digital output module (750...

  • Page 342

    342 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 6. Click on the “dp parameters” tab to adapt the station address of the slave. Enter the station address assigned to the slave in the “station address” field. The...

  • Page 343

    Wago-i/o-system 750 profibus dp-v1 master 343 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.1.2 profibus master plc configuration the global settings and monitoring parameters for the profibus master can be defined using the tabs for the profibus mast...

  • Page 344

    344 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.1.2.2 profibus master dp parameters figure 149: “dp parameters” tab table 225: “dp parameters” tab parameters description info manufacturer general information...

  • Page 345

    Wago-i/o-system 750 profibus dp-v1 master 345 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 225: “dp parameters” tab parameters description mode auto clear modus recognition of dp slave failure disabled “watchdog control” is ignored. The dp master ...

  • Page 346

    346 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.1.2.3 profibus master bus parameters figure 150: “bus parameters” tab table 226: “bus parameters” tab parameters description baud rate (kbits/s) here it is pos...

  • Page 347

    Wago-i/o-system 750 profibus dp-v1 master 347 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 226: “bus parameters” tab parameters description setup time (tset) maximum time between receipt of a telegram and subsequent reaction in slave. Target rotat...

  • Page 348

    348 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.1.2.4 profibus master module parameters figure 151: “module parameters” tab table 227: “module parameters” tab parameters description bus mode the update setti...

  • Page 349

    Wago-i/o-system 750 profibus dp-v1 master 349 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.1.3 profibus slave plc configuration the behavior of the profibus slaves can be defined using the tab described below. 11.1.3.1 profibus slave basic parameters...

  • Page 350

    350 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.1.3.2 profibus slave dp parameters figure153: “dp parameters” tab table 229: “dp parameters” tab parameters description info manufacturer general information o...

  • Page 351

    Wago-i/o-system 750 profibus dp-v1 master 351 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 229: “dp parameters” tab parameters description standard parameters ident number this number is explicit from the identification number assigned by the pno ...

  • Page 352

    352 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.1.3.3 profibus slave inputs/outputs figure 154: “inputs/outputs” tab the components shown apply for the profibus coupler (750-343) used as an example here. For...

  • Page 353

    Wago-i/o-system 750 profibus dp-v1 master 353 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 230: “inputs/outputs” tab parameters description select >> using this button, transfer the selected components from the left window to the right window in o...

  • Page 354

    354 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.1.3.4 profibus slave user parameters figure 155: “user parameters” tab the parameters shown apply for the profibus coupler (750-343) used as an example. Other ...

  • Page 355

    Wago-i/o-system 750 profibus dp-v1 master 355 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 231: “user parameters” tab parameters description module extension here it is possible to set whether or not the internal data bus extension is used. Eeprom...

  • Page 356

    356 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.1.3.5 profibus slave group allocation figure 156: “group allocation” tab table 232: “group allocation” tab parameters description group membership here it is p...

  • Page 357

    Wago-i/o-system 750 profibus dp-v1 master 357 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.2 access to profibus process data the inserted i/o modules appear with the associated, fixed addresses in the plc configuration under the slave “wago 750-343”....

  • Page 358

    358 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) the following example in the “structured text” (st) programming language is intended to clarify access to the variables. To do this, an input is assigned to an ou...

  • Page 359

    Wago-i/o-system 750 profibus dp-v1 master 359 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 160: example of an assignment of the previously created variables 6. To compile, click on project > compile all in the menu bar. 7. Then download the progr...

  • Page 360

    360 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3. Click on the tab “inputs/outputs”. The i/o modules selected previously in the section “creating the plc configuration” are located there. 4. Select the slave i...

  • Page 361

    Wago-i/o-system 750 profibus dp-v1 master 361 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 5. The entry “enabled” should appear in the “values” column. If not, double- click on the entry “disabled” to enable the diagnostic channel in question. Figure 16...

  • Page 362

    362 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.3.3 creating diagnostics in codesys 2.3 in order to execute bus diagnostics or subscriber diagnostics for the slaves, it is necessary to integrate the busdiag....

  • Page 363

    Wago-i/o-system 750 profibus dp-v1 master 363 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3. Click in the menu bar on insert > additional library. The “open” dialog window then opens. Select the busdiag.Lib and click on [open] to add it to this project...

  • Page 364

    364 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 6. Create an entity of the function block diaggetbusstate(). Enter a name above the function block. In this example it is “generalbusinformation”. Enter the value...

  • Page 365

    Wago-i/o-system 750 profibus dp-v1 master 365 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 1. Log into codesys. To do this, click in the menu bar on online > login. The variable window then displays information on the variables (online view). 2. To star...

  • Page 366

    366 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 169: online view of variable window (top window) in fup.

  • Page 367

    Wago-i/o-system 750 profibus dp-v1 master 367 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 3. Binary representation facilitates evaluation of the individual diagnostic bits. The diagnostic information from the extendedinfo array can be displayed in bina...

  • Page 368

    368 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) diagnostic information when ready = true, the state provides information on the current bus status with one of the following values: busok: all configured slaves ...

  • Page 369

    Wago-i/o-system 750 profibus dp-v1 master 369 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.3.7 analyzing profibus diagnostics of individual i/o modules the array elements [0] to [22] listed in the illustration below are reserved for the profibus stan...

  • Page 370

    370 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.3.7.1 description of diagnostic information on the function block diaggetstate.Extendedinfo for profibus this section describes the extendedinfo[0-22] array fo...

  • Page 371

    Wago-i/o-system 750 profibus dp-v1 master 371 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 236: station status 2 bit position explanation bit 1 slave must be parameterized. Bit 2 slave provides diagnostic information until this bit is zero again. ...

  • Page 372

    372 profibus dp-v1 master wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 11.3.7.2 description of diagnostic information for wago i/o modules the wago i/o module diagnostic information is stored beginning with array element extendedinfo...

  • Page 373

    Wago-i/o-system 750 profibus dp-v1 master 373 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 241: channel 2 of 750-466 input module array element contents explanation 33 … 35 see channel 1 array element 129 the number of projected slaves is specifie...

  • Page 374: Diagnostics

    374 diagnostics wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 12 diagnostics 12.1 operating and status messages the following tables contain descriptions of all operating and status messages for the controller which are indicated by l...

  • Page 375

    Wago-i/o-system 750 diagnostics 375 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 12.1.2 fieldbus/system indicating elements figure 175: fieldbus/system indicating elements table 245: diagnostics via sys led status explanation remedy green ready to opera...

  • Page 376

    376 diagnostics wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 246: diagnostics run led status explanation solution green plc program has the status “run”. --- green flashing plc program at a debug point. Resume the program in th...

  • Page 377

    Wago-i/o-system 750 diagnostics 377 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 247: diagnostics i/o led status explanation solution green data cycle on the internal data bus, normal operating status. --- orange flashing startup phase; the intern...

  • Page 378

    378 diagnostics wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 248: ms-led diagnostics status explanation remedy off no error --- red flashing (flashing sequence) a configuration error exists. An explanation of the flashing seque...

  • Page 379

    Wago-i/o-system 750 diagnostics 379 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 249: diagnostics can led status explanation solution off the can interface has not been configured --- alternating red 50 ms / green 50 ms configuration in progress -...

  • Page 380

    380 diagnostics wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 250: diagnostics bf and dia led status explanation remedy bf- led dia- led off off profibus dp not installed --- green green bus active; no profibus errors; no diagno...

  • Page 381: 12.2.1  Flashing Sequences

    Wago-i/o-system 750 diagnostics 381 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 12.2 diagnostics messages via flashing sequences 12.2.1 flashing sequences a diagnosis (fault/error) is always displayed as three flashing sequences in a cyclic manner: 1. ...

  • Page 382

    382 diagnostics wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 176: flashing sequence process diagram.

  • Page 383: Sequence

    Wago-i/o-system 750 diagnostics 383 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 12.2.2 example of a diagnostics message indicated by a flashing sequence the example below illustrates the representation of a diagnostics message via a flashing sequence. ...

  • Page 384: Troubleshooting

    384 diagnostics wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 12.2.3 meaning of blink codes and procedures for troubleshooting this section describes the diagnostics presented as blink codes via the i/o leds. If the diagnostics cannot...

  • Page 385

    Wago-i/o-system 750 diagnostics 385 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 252: error code 1, explanation of blink codes and procedures for troubleshooting error argument cause remedy - invalid parameter checksum for internal data bus interf...

  • Page 386

    386 diagnostics wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 252: error code 1, explanation of blink codes and procedures for troubleshooting error argument cause remedy 7 error occurred while writing to the serial eeprom - swi...

  • Page 387

    Wago-i/o-system 750 diagnostics 387 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 254: error code 3, explanation of blink codes and procedures for troubleshooting error argument cause solution -- internal data bus communication error; defective i/o...

  • Page 388

    388 diagnostics wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 255: error code 4, explanation of blink codes and procedures for troubleshooting error argument cause solution -- maximum permissible number of i/o modules exceeded. ...

  • Page 389: Troubleshooting

    Wago-i/o-system 750 diagnostics 389 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 12.2.4 meaning of blink codes and procedures for troubleshooting this section describes the diagnostics presented as blink codes via the ms leds. If the diagnostics cannot ...

  • Page 390: Service

    390 service wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 13 service 13.1 inserting and removing the memory card 13.1.1 inserting the memory card 1. Use an actuating tool or a screwdriver to open the transparent cover flap by flipping...

  • Page 391

    Wago-i/o-system 750 service 391 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 6. Close the cover flap by flipping it down and pushing it in until it snaps into place..

  • Page 392: 13.2  Firmware Changes

    392 service wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 13.2 firmware changes obtain documentation appropriate for the firmware target version! A firmware upgrade or downgrade can modify, remove or add controller properties and func...

  • Page 393

    Wago-i/o-system 750 service 393 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 13.2.2 perform firmware downgrade do not switch the controller off! The controller can be damaged by interrupting the downgrade process. Do not switch the controller off during...

  • Page 394: 13.2.3  Factory Reset

    394 service wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 13.2.3 factory reset do not switch the controller off! The controller can be damaged by interrupting the factory reset process. Do not switch the controller off during the fact...

  • Page 395: Removal

    Wago-i/o-system 750 removal 395 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 14 removal risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged. Handle the i/o module carefully to prevent injury. 14.1 removing devices perfor...

  • Page 396

    396 removal wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 14.1.2 removing the i/o module 1. Remove the i/o module from the assembly by pulling the release tab. Figure 179: removing the i/o module (example) electrical connections for d...

  • Page 397: Appendix

    Wago-i/o-system 750 appendix 397 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15 appendix 15.1 structure of process data for the i/o modules the process image for the i/o modules on the internal data bus is built up word- by-word in the controller (with...

  • Page 398

    398 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.1 digital input modules digital input modules supply one bit of data per channel to specify the signal state for the corresponding channel. These bits are mapped into the...

  • Page 399

    Wago-i/o-system 750 appendix 399 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.1.4 2 channel digital input module with diagnostics and output process data 750-418, 753-418 the digital input module supplies a diagnostic and acknowledge bit for each i...

  • Page 400

    400 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.1.7 8 channel digital input module ptc with diagnostics and output process data 750-1425 the digital input module ptc provides via one logical channel 2 byte for the inpu...

  • Page 401

    Wago-i/o-system 750 appendix 401 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.2 digital output modules digital output modules use one bit of data per channel to control the output of the corresponding channel. These bits are mapped into the output ...

  • Page 402

    402 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.2.3 2 channel digital input modules with diagnostics and input process data 750-507 (-508), -522, 753-507 the digital output modules have a diagnostic bit for each output...

  • Page 403

    Wago-i/o-system 750 appendix 403 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.2.4 4 channel digital output modules 750-504, -516, -519, -531, 753-504, -516, -531, -540 table 272: 4 channel digital output modules output process image bit 7 bit 6 bit...

  • Page 404

    404 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.2.7 8 channel digital output modules with diagnostics and input process data 750-537 the digital output modules have a diagnostic bit for each output channel. When an out...

  • Page 405

    Wago-i/o-system 750 appendix 405 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.2.9 8 channel digital input/output modules 750-1502, -1506 table 277: 8 channel digital input/output modules input process image bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1...

  • Page 406

    406 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.3 analog input modules the analog input modules provide 16-bit measured data and 8 control/status bits per channel. The controller only uses the 8 control/status bits int...

  • Page 407

    Wago-i/o-system 750 appendix 407 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.3.3 4 channel analog input modules 750-450, -453, -455, -457, -459, -460, -468, (and all variations), 753-453, -455, -457, -459 table 280: 4 channel analog input modules ...

  • Page 408

    408 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.3.4 3-phase power measurement module 750-493 the above analog input modules have a total of 9 bytes of user data in both the input and output process image (6 bytes of da...

  • Page 409

    Wago-i/o-system 750 appendix 409 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.4 analog output modules the analog output modules provide 16-bit output values and 8 control/status bits per channel. The controller only uses the 8 control/status bits i...

  • Page 410: 15.1.5  Specialty Modules

    410 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.5 specialty modules wago has a host of specialty i/o modules that perform various functions. With individual modules beside the data bytes also the control/status byte is...

  • Page 411

    Wago-i/o-system 750 appendix 411 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 750-404/000-005 the above counter modules have a total of 5 bytes of user data in both the input and output process image (4 bytes of counter data and 1 byte of control/ statu...

  • Page 412

    412 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.5.2 pulse width modules 750-511, (and all variations /xxx-xxx) the above pulse width modules have a total of 6 bytes of user data in both the input and output process ima...

  • Page 413

    Wago-i/o-system 750 appendix 413 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.5.4 serial interface modules with standard data format 750-650/000-001, -014, -015, -016 750-653/000-001, -006 the above serial interface modules with standard data forma...

  • Page 414

    414 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) the above ssi transmitter interface modules have a total of 4 bytes of user data in the input process image, which has 2 words mapped into the image. Word alignment is applied...

  • Page 415

    Wago-i/o-system 750 appendix 415 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 294: incremental encoder interface modules 750-634 input process image offset byte destination description high byte low byte 0 - s not used status byte 1 d1 d0 counter ...

  • Page 416

    416 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 750-635, 753-635 the above digital pulse interface module has a total of 4 bytes of user data in both the input and output process image (3 bytes of module data and 1 byte of ...

  • Page 417

    Wago-i/o-system 750 appendix 417 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) output process image offset byte destination description high byte low byte 0 c1 c0 control byte c1 control byte c0 1 d1 d0 setpoint position setpoint position (lsb) 2 d3 d2 s...

  • Page 418

    418 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) output process image offset byte destination description high byte low byte 0 reserved c0 reserved control byte c0 1 d1 d0 process data*) / mailbox**) 2 d3 d2 3 d5 d4 4 c3 d6 ...

  • Page 419

    Wago-i/o-system 750 appendix 419 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) output process image offset byte destination description high byte low byte 0 d0 c dali command, dsi dimming value control byte 1 d2 d1 parameter 2 dali address 2 d4 d3 comman...

  • Page 420

    420 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 301: overview of input process image in the "easy" mode input process image offset byte designation note high byte low byte 0 - s res. Status, activate broadcast bit 0: ...

  • Page 421

    Wago-i/o-system 750 appendix 421 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.5.13 lon ® ftt module 753-648 the process image of the lon ® ftt module consists of a control/status byte and 23 bytes of bidirectional communication data that is process...

  • Page 422

    422 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 304: mp bus master module 750-643 input and output process image offset byte destination description high byte low byte 0 c1/s1 c0/s0 extended control/ status byte contr...

  • Page 423

    Wago-i/o-system 750 appendix 423 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.5.17 vibration velocity/bearing condition monitoring vib i/o 750-645 the vibration velocity/bearing condition monitoring vib i/o has a total of 12 bytes of user data in b...

  • Page 424

    424 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 307: knx/eib/tp1 module 753-646 input process image offset byte destination description high byte low byte 0 - s0 not used status byte 1 s1 op extended status byte opcod...

  • Page 425

    Wago-i/o-system 750 appendix 425 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) in the operating mode with suppressible mailbox (mode 2), the mailbox and the cyclical process data are mapped next. The following words contain the remaining process dat. The...

  • Page 426: 15.1.6  System Modules

    426 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.1.6 system modules 15.1.6.1 system modules with diagnostics 750-610, -611 the modules provide 2 bits of diagnostics in the input process image for monitoring of the interna...

  • Page 427: 15.2.1  General Libraries

    Wago-i/o-system 750 appendix 427 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.2 codesys 2 libraries additional functions for the controller 750-8208are provided using libraries. 15.2.1 general libraries this section contains general codesys libraries...

  • Page 428

    428 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 311: codesys system libraries library function c/iec 61131 systaskinfo.Lib evaluation of task information in the online mode iec 61131 util.Lib various logical operation...

  • Page 429

    Wago-i/o-system 750 appendix 429 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) ensure that files are saved! Files are not reliably saved on the data medium until you call up the “sysfileclose” function block! Additional information about this is given in...

  • Page 430

    430 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) - sysfilewriteasync ensure that files are saved! Files are not reliably saved to the data medium until you call up the “sysfilecloseasync” function block. Additional informati...

  • Page 431

    Wago-i/o-system 750 appendix 431 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.2.1.6 busdiag.Lib the controller 750-8208 supports the following function blocks of the “busdiag.Lib” library: - diaggetbusstate - diaggetstate the document containing a de...

  • Page 432

    432 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) the document containing a description of this library and the function blocks it includes is available for download on the internet at www.Wago.Com . 15.2.1.9 wagoconfigtoolli...

  • Page 433

    Wago-i/o-system 750 appendix 433 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 316: description of the configuration scripts for “codesys” parameters status call output/input effecti ve information codesys webserver version read get_coupler_details...

  • Page 434

    434 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 317: description of the configuration scripts for “networking - host/domain name” parameters status call output/input effecti ve host name host name read get_coupler_det...

  • Page 435

    Wago-i/o-system 750 appendix 435 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 318: description of the configuration scripts for “networking - tcp/ip” parameters status call output/input effecti ve default gateway 1 default gateway read get_default...

  • Page 436

    436 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 319: description of the configuration scripts for “networking - ethernet” parameters status call-up output/input effective switch configuration interface mode read get_d...

  • Page 437

    Wago-i/o-system 750 appendix 437 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 320: description of the configuration scripts for “ntp” parameters status call output/input effecti ve configuration data state read get_ntp_config state query the statu...

  • Page 438

    438 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 321: description of the configuration scripts for “clock” parameters status call-up output/input effective clock time and date date on device, local read get_clock_data ...

  • Page 439

    Wago-i/o-system 750 appendix 439 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 322: description of the configuration scripts for "administration" parameters status call output/input effecti ve configuration of service interface configuration of ser...

  • Page 440

    440 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 324: description of configuration scripts for “ports and services” – “network services parameters status call-up output/input valid network services telnet telnet port r...

  • Page 441

    Wago-i/o-system 750 appendix 441 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 325: description of configuration scripts for “ports and services” – “plc runtime services” parameters status call output/input effecti ve general settings plc runtime v...

  • Page 442

    442 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 325: description of configuration scripts for “ports and services” – “plc runtime services” parameters status call output/input effecti ve codesys 2 settings codesys2 we...

  • Page 443

    Wago-i/o-system 750 appendix 443 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 325: description of configuration scripts for “ports and services” – “plc runtime services” parameters status call output/input effecti ve e!Runtime settings e!Runtime w...

  • Page 444

    444 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 326: description of configuration scripts for “ports and services” – “ssh/tftp” parameters status call-up output/input valid ssh ssh server ssh read get_ssh_config state...

  • Page 445

    Wago-i/o-system 750 appendix 445 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 327: description of configuration scripts for “snmp” parameters status call-up output/input valid general snmp information parameters name of device read get_snmp_data d...

  • Page 446

    446 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 327: description of configuration scripts for “snmp” parameters status call-up output/input valid snmp trap receiver configuration for v1 and v2c any number of trap rece...

  • Page 447

    Wago-i/o-system 750 appendix 447 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 327: description of configuration scripts for “snmp” parameters status call-up output/input valid configuration of snmp v3 any number of snmp v3 users can be created. A ...

  • Page 448

    448 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 327: description of configuration scripts for “snmp” parameters status call-up output/input valid add new v3- user write config_snmp v3-edit=add v3-auth- name= v3-auth-t...

  • Page 449

    Wago-i/o-system 750 appendix 449 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) the document containing the description of the library and the function block it includes is available for download on the internet at www.Wago.Com . 15.2.1.12 wagolibled.Lib ...

  • Page 450

    450 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) - snmpm_set - snmpm_set_v3 the document containing a description of this library and the function blocks it includes is available for download on the internet at www.Wago.Com ...

  • Page 451

    Wago-i/o-system 750 appendix 451 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.2.2 libraries for a canopen and canlayer2 link this section contains libraries supported by the controller 750-8208for linking with canopen and canlayer2. 15.2.2.1 wagocanl...

  • Page 452

    452 appendix wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.2.2.3 wagocanopendiag.Lib the controller 750-8208 supports the following function blocks of the “wagocanopendiag.Lib” library: - canopen_diag the document containing a desc...

  • Page 453

    Wago-i/o-system 750 appendix 453 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) 15.2.3 libraries for a profibus link this section contains libraries supported by the controller 750-8208for linking with profibus. 15.2.3.1 wago_dpm_01.Lib the controller 750...

  • Page 454: List Of Figures

    454 list of figures wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) list of figures figure 1: view of device ....................................................................................... 27 figure 2: marking area for serial nu...

  • Page 455

    Wago-i/o-system 750 list of figures 455 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 49: “wago ethernet settings” – protocol tab ............................... 207 figure 50: “wago ethernet settings” – status tab ...................................

  • Page 456

    456 list of figures wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 97: program memory (example) ............................................................. 251 figure 98: data memory and function block limitation (example) ......

  • Page 457

    Wago-i/o-system 750 list of figures 457 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) figure 145: adding profibus slaves ............................................................... 340 figure 146: selecting i/o modules ..................................

  • Page 458: List Of Tables

    458 list of tables wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) list of tables table 1: variants ................................................................................................... 15 table 2: number notation ...........

  • Page 459

    Wago-i/o-system 750 list of tables 459 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 47: wbm “configuration of host and domain name” page – “host name” group .............................................................................................

  • Page 460

    460 list of tables wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 80: wbm “configuration of network services” page – “https” group .....................................................................................................

  • Page 461

    Wago-i/o-system 750 list of tables 461 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 109: “information” > “network details” submenu .................................. 156 table 110: “plc runtime” menu ..................................................

  • Page 462

    462 list of tables wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 151: “package server” > “firmware backup” > “auto update feature” menu ...............................................................................................

  • Page 463

    Wago-i/o-system 750 list of tables 463 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 193: modbus settings ............................................................................ 264 table 194: modbus tcp settings .................................

  • Page 464

    464 list of tables wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 242: legend for figure “power supply indicating elements” ................. 374 table 243: field-side supply diagnostics .............................................

  • Page 465

    Wago-i/o-system 750 list of tables 465 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 279: 2 channel analog input modules ..................................................... 406 table 280: 4 channel analog input modules ..............................

  • Page 466

    466 list of tables wago-i/o-system 750 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09) table 322: description of the configuration scripts for "administration" ........ 438 table 323: description of configuration scripts for “package server” ............. ...

  • Page 467

    Wago-i/o-system 750 467 750-8208 pfc200 cs 2eth rs can dpm manual version 1.1.0, valid from fw version 02.06.20(09).

  • Page 468

    Wago kontakttechnik gmbh & co. Kg postfach 2880 • d-32385 minden hansastraße 27 • d-32423 minden phone: 05 71/8 87 – 0 fax: 05 71/8 87 – 1 69 e-mail: info@wago.Com internet: http://www.Wago.Com.