Waldman Carbon User Manual - page 13
• Assignable Dial / Dial Endereçável
• Assignable Slider / Slider Endereçável
• Assignable Wheel / Roda Endereçável
• Assignable Pedal / Pedal Endereçável
• Master Volume / Volume Máster
• Pad Setting / Ajuste do Pad
• Groups:A,B,C,D,E (49/61) / Grupos A, B, C, D, E (49/61)
8 dials that can be assigned channel and controller
No. independently. First press the “assign”button.
Then operate the dial to select the dial, and the LCD
shows the controller number and the controller
value. Input the No. with NUMERIC button or
+/- button when the dial is selected. The numbers
are the controllers.you also need to use enter to
confirm the data.
9 sliders that can be assigned controller No.
independently. First press the “assign” button
Then operate the slider, and the LCD shows the
controller number and the controller value. Input
the No. with NUMERIC button or +/-button when
the dial is selected, The numbers are the controllers.
You also need to use enter to confirm the data.
The modulation and pitch bend are the default
function of the 2 wheels. It can be assigned
controller No. independently. First press the
“assign”button. Then operate the wheel to select
the wheel, and the LCD shows the controller
number and the controller value. Input the No.
with NUMERIC button or +/- button when the dial
is selected. The numbers are the controllers.
You also need to use enter to confirm the data.
2 pedal interfaces that can be assigned controller
No. independently.First press the “assign”button.
Then operate the pedal to select it, and the LCD
shows the controller number and the controller
value. Input the No. with NUMERIC button or +/-
button when the pedal is selected. You need to use
enter to confirm the data.
It sends GM Master Volume message(F0 7F 7F 04
01 00 xx F7)
Activate a pad, Press the Ctrl Assign button .The
LCD display will display the currently assigned
controller of the pad. The controller number 128 is
for pad note. Press shift” to edit the Pad note. Enter
the new pad number you want the pad to assigned
with the numeric button or +/- button.
The button can be assigned as a controller, Press
the ‘CTRL ASSIGN’ button, then press a button,
the LCD display ‘ctrldata1’, input the number of
the controller that you want to operate, press the
‘enter’ to confirm the value. The LCD will display
‘ctrldata2’,at this moment, you can input the value
that the controller should be send.
8 dials podem endereçar canal e número de
controlador independentemente. Primeiramente,
pressione o botão “ASSIGN”. Então, opere o dial
para selecionar o dial e o LCD mostrará o número do
controlador e o valor do controlador. Insira o número
com o botão NUMERIC ou +/-, quando o dial for
selecionado. Os números são os controladores. Você
também precisa usar ENTER para confirmar os dados.
9 sliders podem endereçar número de controlador
independentemente. Primeiramente, pressione o botão
“ASSIGN”. Então, opere o slider e o LCD mostrará o
número do controlador e o valor do controlador. Entre
o número com o botão NUMERIC ou +/-, quando o
dial for selecionado. Os números são os controladores,
Você também precisa usar ENTER para confirmar os
dados.
Modulação e Pitch Bend são a função padrão destas
duas rodas. Podem endereçar número de controlador
independentemente. Primeiramente, pressione o botão
“ASSIGN”. Então, opere para selecionar a roda e o
LCD mostrará o número do controlador e o valor do
controlador. Entre o número com o botão NUMERIC
ou +/-, quando o dial for selecionado. Os números são
os controladores. Você também precisa usar ENTER
para confirmar os dados.
2 interfaces de pedal que podem endereçar número
de controlador independentemente. Primeiramente,
pressione o botão “ASSIGN”. Então, opere o pedal e
selecione. O LCD mostrará o número do controlador e
o valor do controlador. Entre o número com o botão
NUMERIC ou +/-, quando o pedal for selecionado. Os
números são os controladores. Você também precisa
usar ENTER para confirmar os dados.
Envia a mensagem de Volume Master GM (F0 7F 04 01
00 xx F7)
Ative um pad, pressione o botão “CRTL ASSIGN”. O
display LCD mostrará o controlador do pad atualmente
endereçado. O controlador número 128 é para
nota pad. Pressione “SHIFT” para editar a nota Pad.
Entre com o número do pad novo que deseja ser
endereçado, com o botão NUMERIC ou +/-.
O botão pode ser endereçado como um controlador.
Pressione o botão “CRTL ASSIGN”, pressione um botão
e o LCD mostrará “crtldata1”. Entre o número do
controlador que você deseja operar, pressione “ENTER”
para confirmar o valor. O LCD mostrará “crtldata2”.
Neste momento, você pode fazer a entrada do valor
que o controlador deverá ser enviado.