Waldorf GP8910E Installation And Operation Manual - page 9

7 

Installation

Commissioning 

1. 

Before leaving the new installation; 

a. Check the following functions in accordance with the operating instructions specified in the 

'Operation' section of this manual. 

 Check the current draw and loading for the equipment.  Refer to the 'Specification' section 

for the correct electrical requirements. 

C

heck that all the connections are correct and that all cover panels have been re-fitted. 

Check that the appliance functions in accordance with the operating instructions.

 Ensure that this instruction manual is left with the appliance. 

 Ensure that all the relevant details and contacts have been added to the front of this  

manual. 

b. Ensure that the operator has been instructed in the areas of correct operation and shutdown 

procedure for the appliance. 

2. 

This manual must be kept by the owner for future reference and as a record of 

Date of Purchase,

Date of Installation 

and 

Serial  Number  of  Unit 

recorded and kept with this manual.  (These 

details can be found on the Rating Plate.  (Refer to the dimension drawings for rating 

plate location). 

NOTE: 

 If for some reason it is not possible to get the appliance to operate correctly, turn off the  

electrical power supply and contact a qualified service person.  The supplier of this  

appliance will be able to recommend a suitable person. 

Make sure that the electrical supply is turned off before any service or maintenance work 

is carried out.