Waldorf RN8200E Installation And Operation Manual - page 14

12 

Installation

 Rear Adjustable Feet, fitting:- 

a. 

Secure the rear of the base tray to 

the rear cooktop legs by screwing the 

two adjustable feet supplied, into the 

base of the rear cooktop legs. 

b. 

Secure each adjustable foot, hand 

tight. 

 Rear Rollers, fitting:- 

a. 

Fit the rear leg securing bolts up 

through the centre of the rear leg 

housings to secure the rear of the 

base tray to the rear cooktop legs and 

tighten up the bolts using a 24mm 

socket. 

b. 

Fit the rear rollers to the rear leg  

supports. 

c. 

Secure the rear rollers to the rear leg  

supports using the locating bolts 

supplied. 

d. 

Tighten the locating bolts using a 

10mm spanner. 

8. 

Lift the cooktop back onto its legs / rollers 

and remove the restraints or refit all the 

elements and griddle plates to the cooktop, 

ensuring that they are correctly fitted. 

9. 

Adjust the adjustable feet to level the  

appliance. 

Fig 1 

Cooktop 

Cooktop 

Legs 

Base Tray 

Leg Mount 

Points 

Adjustable 

Foot 

Rear 

Roller 

Rear Leg 

Securing Bolt 

Roller 

Locating Bolt 

Rear Leg 

Housing