Waldorf RN8510G Installation And Operation Manual - page 14
12
Operation
Operation Guide
1.
Waldorf appliances have been designed to provide simplicity of operation and 100% safety
protection.
2.
Improper operation is almost impossible, however bad operation practices can reduce the life of the
appliance and produce a poor quality product. To use this appliance correctly please read the
following sections carefully:-
Lighting the Open Burners (F - Flame Failure Option).
Lighting the Open Burners (PF - Pilot and Flame Failure Option).
Lighting the Griddle.
Oven Pilot Ignition.
Oven Main Burner / Thermostat.
Turning the Oven to ‘Stand-By’ Mode.
Oven ‘Shut-Down’.
Description of Controls
Griddle Option
Burner Control
OFF Position
PILOT Burner
HIGH Flame
LOW Flame
Gas Control Knobs
Piezo Igniter
(Griddles Only)
Piezo Igniter (Oven)
Oven Option
OFF Position
PILOT Burner
Temperature
Graduations 100°C to
290°C
Open Burner Option
OFF Position
HIGH Flame
LOW Flame
Rear Burner
Front Burner
(Indicators are located
above the Gas Control
Knobs).
This appliance is for professional use and is only to be used by qualified
persons.
Only authorised service persons are to carry out installation, servicing or gas
conversion operations.
Components having adjustments protected (e.g. paint sealed) by the
manufacturer should not be adjusted by the user / operator.
Caution
Fig 3