Walimex Daylight 150 Instruction Manual - page 8
15
Daylight 150
Cleaning
Housing
Use a microfiber cloth to remove light and stubborn
dirt
Lamp
Wipe off with dust brush or dry, soft cloth
ADVICE:
Don´t clean the lamps with water. Even small
residues on the lamps could lead to bursting
10.3
Change lamp
WARNING
Please just use lamps, which are conform with the required
specifications.
See Technical Specifications.
1.
Screw lamp in and out.
See Screw lamp in and out.
10.4
Change micro-fuse
WARNING
Danger of electric shock and fire through short-circuit
A micro-fuse, which is not conform with the required specifications,
doesn´t protect against the overloading of the device.
Please just use a micro-fuse, which is conform with the required
specifications. See Technical Specifications.
•
Switch off device.
See Switch the device on and off.
•
Disconnect from power supply:
Demount power cord.
•
Open fuse holder:
Pull out the fuse holder carefully with a little screwdriver.
16
•
Pull out the fuse holder completely out of the slot you’re your hand.
•
Take out the old micro-fuse.
•
Slide the new micro-fuse in the holder.
•
Slide the fuse holder carefully in the slot as far as it goes.
11.
Accessories and options
You can find extensive accessories in our webshop.
12.
Spare parts
Part of the device
Item number
Lamp (walimex Spiral Daylight Lamp 25 W)
12803
Power Cord
12914
Standard Reflector
12912
13.
Disposal and environment protection
Your device should be disposed free of charge at the local disposal points.
14.
Technical specifications
Device
Power Supply
AC 220 - 230 V / 50 Hz
Weight
approx. 1,3 kg
Vertical Pivoting Radius
180 °
Dimensions incl. Standard
Reflector (HxWxD)
approx. 18 cm x 18 cm x 25 cm
Accessories
Lamp, Standard Reflector, Instruction