Walker Bay AIRIS 16425 PLAY 8 Owners & Safety Manual - page 12
21
22
VERSA-TRACK™ ACCESSORY ATTACHMENT SYSTEM
AND ALUMINUM GEAR MOUNTING PLATFORM
Only Walker Bay
®
Airis
®
kayaks have such a versatile accessory attachment rail system.
The Sport 10, Sport 11 and Tender have the shorter version of the rail, while the Angler
kayak comes with the full-length version.
An aluminum accessory platform is available from Walker Bay Boats. It comes standard
with the Angler kayaks, but owners of the Sport 10, Sport 11 and Tender kayaks can
order it from Walker Bay or purchase it through any of the Airis
®
dealers.
The platform provides hundreds of possibilities of mounting equipments or accessories
onto the kayak. Besides fishing rod holders, you can also mount GPS, fish finder, storage
container, navigation/safety lights, or even water cannons on the platform! Just drill or
tap on the platform, and install whatever you want to have on the kayak.
The full length rail system on the Angler kayaks allows you to position the aluminum
platform anywhere you want – behind you, in front of you, or you can even sit on it. Or
you can install more than one platforms for more equipments. The options are endless,
only limited by your imagination!
To mount the aluminum platform onto
the rail, find the plastic adapters under
the platform. It is like a hollow tube with
opening on one side.
With the adapter facing down, align the
platform on the back of the boat, in front
of the ends of the rails.
NOTICE
On the full-length rail system on the Angler kayak, there are 2 openings in the middle
of the rail. If you want to have the platform near the middle section of the kayak, start
from the nearest opening.
NOTICE
We do our best to make installing the aluminum platform as easy as possible. However,
on rare occasions, the aluminum platform may be very tight and difficult to move on the
rails. In this case, try partially deflating the kayak. This will make platform installation
and movement a lot easier. Re-inflate the kayak after installation and positioning is
complete.
Do not kick the aluminum platform or use too much force. It could damage the
rails or puncture the hull of the kayak.
CAUTION
Insert the end of the rail runner into the
opening of the adapter. Use water or soap
water for lubrication.
After both rails are in the adapters, push
the platform forward with both hands.
Push on both sides until the platform is at
the ideal position.
修改:
1)增加一条直线(见红色线);
2)删除所有蓝色线,以突出主体;
3)打“X”的那块东西,用浅灰色填充。