- DL manuals
- Walker
- TV
- WP3270LCD
- Operating Instructions Manual
Walker WP3270LCD Operating Instructions Manual - Environmental Information
English - 5 -
Environmental Information
This television is designed to consume less energy to save environment. You not only help to save the
•
environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture
of this TV. To reduce energy consumption, you should take the following steps:
You can use Power Save Mode setting, located in the Picture Settings menu. If you set Power Save Mode
•
as
Eco, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to
optimum level. Note that some picture settings will be unavailable to be changed when the TV is in Power
Save Mode.
If you set power save mode as Picture off, a message will appear on the screen and backlight will be off
•
within three seconds. Press any button on the remote controller to activate the picture again.
When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce
•
energy consumption.
Disconnect power when going away for longer time.
•
It is highly recommended to activate Power Save Mode setting to reduce your annual power consumption.Also
•
it is recommended to disconnect the TV from the mains plug to save energy more when you do not use.
Please help us to save environment by following these steps.
•
Repair Information
Please refer all servicing to qualified personnel. Only qualified personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for further information.
Summary of WP3270LCD
Page 1
Colour television with remote control operating instructions wp3270lcd be walker wise...Logon to www.Walker.Ie.
Page 2: Contents
English - 1 - contents features ................................................................. 2 introduction ............................................................. 2 preparation ............................................................. 2 safety precautions ...............................
Page 3: Features
English - 2 - features remote controlled colour lcd tv. • fully integrated terrestrial digital-cable tv (dvb-t • c- mpeg2) (dvb-t-c mpeg4) dvb-satellite. • dvbs/s2 compliant 4 hdmi connectors for digital video and audio. • this connection is also designed to accept high definition signals. 2 usb inp...
Page 4: Safety Precautions
English - 3 - safety precautions read the following recommended safety precautions carefully for your safety. Power source the tv set should be operated only from a 220-240v ac, 50 hz outlet. Ensure that you select the correct voltage setting for your convenience. Power cord do not place the set, a ...
Page 5: Package Contents
English - 4 - lcd screen the lcd panel is a very high technology product with about a million thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green or red point. Please note that this does not affect the performa...
Page 6: Environmental Information
English - 5 - environmental information this television is designed to consume less energy to save environment. You not only help to save the • environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this tv. To reduce energy consumption, you...
Page 7: Remote Control Buttons
English - 6 - remote control buttons no function 1. Play (in media browser mode) 2. Programme recording 3. Fast rewind (in media browser mode) 4. No function 5. Mono/stereo - dual i-ii / current language (*) 6. Image size 7. Teletext / mix 8. Electronic programme guide 9. Numeric buttons 10. Av / so...
Page 8
English - 7 - lcd tv and operating control switch front and rear view control switch view control switch 1. Standby/on button 2. Tv/av button 3. Programme up/down buttons 4. Volume up/down buttons note: press “ ” and buttons at the same time to view main menu. Viewing the back side connections 12 1 ...
Page 9
English - 8 - spdif digital out 6. Outputs digital audio signals of the currently watched source. Use a digital optic cable to transfer audio signals to a device that has spdif input. Rf input/sat. Input 7. Connects to an aerial,cable and satellite antenna system. Note that if you use a decoder or a...
Page 10: Antenna Connection
English - 9 - antenna connection aerial/cable connection connect the aerial or cable tv plug to the aerial • input socket located at the rear of the tv. Satellite connection connect the satellite tv plug to the satellite • input socket located at the rear of the tv. 1 3 subw. Out 300ma max. Aerial o...
Page 11: Side Hdmi Connection
English - 10 - side hdmi connection you can use side hdmi input to connect a device that has an hdmi connector to your tv. Use an appropriate hdmi cable to make such a connection. Note that you should switch to the hdmi source to view the content from the connected device. Power off both the tv and ...
Page 12: Connecting to A Dvd Player
English - 11 - connecting to a dvd player if you want to connect a dvd player to your lcd tv, you can use connectors of the tv set. Dvd players may have different connectors. Please refer to your dvd player’s instruction book for additional information. Power off both the tv and the device before ma...
Page 13
English - 12 - connecting to a wired network (optional) for connecting to a wired lan network, you should perform the following steps: connect broadband isp connection ethernet cable to the ethernet input of your modem. • afterwards, you should connect your pc to the one of your modem’s lan connecto...
Page 14: Remote Control Handset
English - 13 - remote control handset inserting batteries remove the battery cover located on the back of • the handset by gently pulling backwards from the indicated part. Insert two • aaa/r3 or equivalent type batteries inside. Insert two aaa/r3 or equivalent type batteries inside. Observe the cor...
Page 15: Input Selection
English - 14 - the aspect ratio (picture shape) when watching • a channel with just digital teletext broadcasting is the same as the aspect ratio of the picture viewed previously. When you press the “ • ” button again, the digital teletext screen will be displayed. Analogue teletext use of teletext ...
Page 16
English - 15 - ok (options): views/records or sets timer for future programs. Info (event details): displays the programmes in detail. Green button: programme schedule will be listed yellow button: display epg data in accordance with timeline schedule blue button (filter): views filtering options. (...
Page 17: First Time Installation
English - 16 - programme options in epg menu, press the ok button to enter the “event options” menu. Select channel in epg menu, using this option, you can switch to the selected channel. Record / delete record timer important: to record a programme, you should first connect a usb disk to your tv wh...
Page 18
English - 17 - if you select cable option and press ok button on the remote control to continue, the following message will be displayed on the screen: to continue please select yes and press ok. To cancel operation, select no and press ok. You can select frequency ranges from this screen. For highl...
Page 19: Auto Tuning
English - 18 - unicable: if you have multiple receivers and a unicable system, select this antenna type. Press ok to continue. Configure settings by following instructions on the screen. Press ok to scan for services. Diseqc switch: if you have multiple satellite dishes and a diseqc switch, select t...
Page 20: Manual Tuning
English - 19 - manual tuning hint: this feature can be used for direct broadcast entry. You should select satellite before starting manual search. Satellite settings menu is located in the settings menu. Select • manual channel scan from the installation menu by using “ ”/“ ” and ok buttons. Manual ...
Page 21
English - 20 - if you start digital aerial scan process, automatic scanning will start. You can press “ menu” button to cancel. If you start digital cable scan process, the following screen will be displayed. You can select frequency ranges from this screen. For highlighting lines you see, use “ ” o...
Page 22
English - 21 - operating the channel list press “ • ” or “ ” button to select the channel that will be processed. Press “ ” or “ ” button to select a function on channel list menu. Use • p+/p- buttons to move page up or down. Press • blue button to view filtering options. Press “ • menu” button to e...
Page 23: Managing Stations: Sorting
English - 22 - select a channel by using “ • ” or “ ” button. Press ok button to add selected channel to favourites list. Press ok button again to remove. Button functions ok • : add/remove a station. Yellow • : tag/untag a channel. Green • : tag/untag all channels. Blue • : displays filtering optio...
Page 24
English - 23 - select a device by using “ ” or “ ” button and press ok. Viewing videos via usb when you select videos from the main options, available video files will be filtered and listed on this screen. You can use “ ” or “ ” button to select a video file and press ok button to play a video. If ...
Page 25: Recordings Library
English - 24 - 0..9 (jump): when you press a digit button displays textual file search. Play this (ok button) : plays the selected file. Play ( button) : plays all media files starting with the selected one. Stop ( button): stops playback. Pause ( button): pauses the selected playback. Previous/next...
Page 26: Media Browser Settings
English - 25 - media browser settings you can set your media browser preferences by using the settings dialog. Press “ ” or “ ” button to highlight an item and use “ ” or “ ” button to set. View style: sets default browsing mode. Music ff/fr speed: sets music ff/fr speed time. Slide show interval: s...
Page 27: Watching Recorded Programmes
English - 26 - select yes by using “ ” or “ ” / ok buttons to cancel instant recording. Note: switching to a different broadcast or source; and viewing media browser are not available during the recording. Watching recorded programmes in the main menu, use “ ” or “ ” buttons to select media browser....
Page 28: Configuring Picture Settings
English - 27 - note: you can shift the screen up or down by pressing “ ” / “ ” buttons while picture zoom is selected as 14:9 zoom, cinema or subtitle. 14:9 this zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. 14:9 zoom this option zooms to the 14:9 picture...
Page 29: Configuring Sound Settings
English - 28 - advanced settings use “ ” or “ ” button to select advenced settins. Dynamic contrast: you can change contrast rate by using dynamic contrast function. Dynamic contrast can be set to one of these options: low, medium, high or off. Colour temp: sets the desired colour tone. Picture zoom...
Page 30: Using A Conditional Access
English - 29 - operating sound settings menu items press “ • ” or “ ” button to highlight a menu item. Use “ • ” or “ ” button to set an item. Press “ • menu” button to exit. Sound settings menu items volume: adjusts volume level. Equalizer: press ok button to view equalizer sub- menu. In equalizer ...
Page 31: Configuring Language
English - 30 - the tv terminal may be damaged if the cam is forcefully inserted. Connect the tv to the mains supply, switch on and then wait for few moments until the card is activated. When no module is inserted, “ • no common interface module detected” message appears on the screen. Refer to the m...
Page 32: Parental Control
English - 31 - language settings in the settings menu, highlight the language settings item by pressing “ ” or “ ” buttons. Press ok and language settings submenu will be displayed on the screen: use “ ” or “ ” buttons to highlight the menu item that will be adjusted and then press “ ” or “ ” button...
Page 33: Timers
English - 32 - timers to view timers menu, press menu button and select settings icon by using “ ” or “ ” button. Press ok button to view settings menu. Use “ ” or “ ” button to highlight timers and press ok to continue: setting sleep timer this setting is used for setting the tv to turn off after a...
Page 34: Configuring Source Settings
English - 33 - to view the details about the usb disk, highlight hard disk info by using “ ” or “ ” key and press ok. Usb disk information will be displayed configuring date/time settings select date/time in the settings menu to configure date/time settings. Press ok button. Use “ • ” or “ ” buttons...
Page 35: Configuring Other Settings
English - 34 - configuring wired network settings in advanced mode after pressing green button, advanced mode will be available. While in advanced mode, press red button to edit settings. When finished, press ok to save, press return/back to cancel. Configuring satellite settings select satellite se...
Page 36: Other Features
English - 35 - you can enable or disable automatic upgrade by setting automatic scanning option. You can select the satellite, which is used for updating process by setting edit upgrade for satellite option. You can manually search for new software by selecting scan for upgrade. Application version:...
Page 37: Teletext
English - 36 - teletext teletext system transmits information such as news, sports and weather on your tv. Note that is the signal degrades, for example in poor/adverse weather conditions, some text errors may occur or the teletext mode may be aborted. Teletext function buttons are listed below: “ ”...
Page 38: Display Modes
English - 37 - appendix c: av and hdmi signal compatibility (input signal types) source supported signals available ext-1 (scart 1) pal 50/60 o ntsc 60 o rgb 50 o rgb 60 o ext-2 (scart-2) pal 50/60 o ntsc 60 o rgb 50 x rgb 60 x fav (side av) pal 50/60 o ntsc 60 o ypbpr 480i 60hz o 480p 60hz o 576i 5...
Page 39
English - 38 - appendix d: supported dvi resolutions when connecting devices to your tv’s connectors by using dvi converter cables (not supplied), you can refer to the following resolution information. 24hz 25hz 30hz 50hz 60hz 480i þ 480p þ 576i þ 576p þ 720p þ þ 1080i þ þ 1080p þ þ þ þ þ appendix e...
Page 40: Appendix F: Software Upgrade
English - 39 - appendix f: software upgrade • your tv is capable of finding and updating new software upgrades over broadcast channels. • for broadcast channels search, tv looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update...
Page 41: Specifications
English - 40 - specifications tv broadcasting pal/secam b/g d/k k’ i/i’ l/l’ receiving channels vhf (band i/iii) uhf (band u) hyperband number of preset channels 10.000 channel indicator on screen display rf aerial input 75 ohm (unbalanced) operating voltage 220-240v ac, 50 hz. Audio output power (w...
Page 42: Important Instruction
English - 41 - important instruction for your own safety read following instruction carefully before attempting to connect this unit to the mains supply. Mains (ac) operation the wires in the mains lead are coloured in accordance with the following code : important as the colours of the wires in the...
Page 43
50 21 63 45.