WallyFlex WallyFlex Owner's Manual - How to Use Your Wallyflex
of
8
how to use your wallyflex
step 1
Remove nozzle from the WallyFlex console.
step 2
Pull the switch located on the right side of the console. This will activate the
central vacuum power unit.
step 3
Proceed to cleaning.
step 4
8IFOàOJTIFEre-insert the nozzle into the WallyFlex console. This will turn off the
central vacuum unit and seal the nozzle, allowing the use of other vacuum inlets at
full vacuuming power.
Note: When in use, for increased safety, the central vacuum unit can be stopped at any time,
simply by pressing the switch on the WallyFlex console.
* If your WallyFlex is not working as described in the owner’s manual, contact your local
authorized dealer.
7