Walther Pilot Rapid Operating Instructions Manual - Contents
18
19
Contents
Exploded Drawing
2
Declaration of CE-Conformity
19
Spare Parts List
20
1
General Information
22
1.1
Identification of Model Version
22
1.2
Normal Use
22
1.3
Improper Use
23
2
Technical Description
23
3
Safety Instructions
24
3.1
Identification of safety instructions
24
3.2
General Safety Instructions
24
4
Assembly
25
5
Operation
26
6
Retooling and Repairs
27
7
Cleaning and Maintenance
28
8
Troubleshooting
29
8.1
Correcting spray pattern flaws
29
9
Disposal of Cleaning and Servicing Substances
30
10
Technical Data
30
Declaration of CE-Conformity
We, the manufacturers of the equipment, hereby declare under our sole respon-
sibility that the product(s) described below conform to the essential safety requirements.
This declaration will be rendered invalid if any changes are made to the equipment wit-
hout prior consultation with us.
Manufacturer
WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation
Models:Hand-held Spray Guns PILOT Rapid, - MP
Rapid
Material Connection
V 10 172
Rapid-MP Material Connection
V 10 174
Intended purpose
Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006 / 42 / EC
94 / 9 EC (ATEX Directives)
EN ISO 12100-1
EN ISO 12100-2
DIN EN 1953
DIN EN 1127-1
DIN EN 13463-1
Specification according 94 / 9 / EC
Category 2
Part marking
II 2 G c T 6
Tech.File,Ref.:
2401
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is
prohibited until such time as the end product has been proved to conform to the pro-
vision of the Directives 2006 / 42 / EC.
Wuppertal, the 1st of January 2010
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety instructions
provided in the product documentation must be observed at all times.
i.V.