WANDERS SYMAX User Instructions - page 6
6
user instructions
WAN_SYMAX_EN_v.1.0_112016
ALL
selected
ON TIME SETTING (PROGRAM 1):
7. K, 1, ON displayed, ALL is displayed
shortly, and hour fl ashes.
8. To select the hour press the A or B
buttons
9. To confi rm press the F button. K,
1, ON displayed, ALL is displayed
shortly, and minutes fl ashes.
10. To select the minutes press the A or
B
buttons.
11. Press the F button to confi rm.
OFF TIME SETTING (PROGRAM 1):
12. K, 1, OFF displayed, ALL is
displayed shortly, and hour fl ashes.
13. To select the hour press the A or B
buttons
14. To confi rm press the F button. K,
1, OFF displayed, ALL is displayed
shortly, and minutes fl ashes.
15. To select the minutes press the A or
B
buttons.
16. Press the F button to confi rm.
1
ON
AM
PM
OFF
1
ON
AM
PM
OFF
NOTE:
Either continue to PROGRAM 2 and set on and off times or stop
programming at this point, and PROGRAM 2 remains deactivated.
NOTE:
PROGRAM 1 and 2 use the same on (thermostatic) and off temperatures
for ALL, SA:SU and daily timer ( ¡, ™, £, ¢, ∞, §, ¶ ). Once a new on
(thermostatic) and/or off temperature has been set, that temperature
becomes the new default setting.
NOTE:
If ALL, SA:SU or daily timer are programmed for PROGRAM 1 and
PROGRAM 2 on and off times, these becom the new default times. The
batteries (or adapter) must be removed to clear the PROGRAM 1 and
PROGRAM 2 on and off times and temperatures.
SA
:SU or daily timer ( ¡, ™, £, ¢, ∞, §, ¶ ) selected
•
Set the on time and off time using the same procedure as "ALL
geselecteerd" (above).
•
SA:SU: Set on time and off time for both Saturday and Sunday.
•
Daily timer: Unique on and off times may be set for a single day
of the week, for multiple days of the week, or for every day of the
week.
•
Wait to finish the setting.
Using the eff ect burner
ON:
To switch the effect burner on, press the
I
button. P will be displayed.
OFF:
To switch the effect burner off, press the
I
button. P will be disappear.
ON
AM
PM
OFF
NOTE:
The latching solenoid valve cannot operate manually. If the receiver
battery runs low it will remain in the last operating position.
NOTE:
Upon ignition the main burner (front) is on and the eff ect burner (back)
is in the last used setting.
Ecowave Mode
ON:
Press the H button to select the
Ecowave Mode. N will be displayed.
OFF:
Press the H button to select the
Ecowave Mode. N will be disappear.
AM