WangYe WY250T-3 User Manual - page 16
- 27 -
Radiator Maintenance
Suggestion Cooled liquid Type: anti-freeze liquid
It’s only using no rust no freeze liquid for this engine。
Inspecting
Open the bolt, take the cover off, you can see the liquid lever is
staying1/5,if less than1/5,please immit it.
Immiting the Cooled liquid
Ÿ
Open the gas of the radiator 1. if the cooled liquid is not full,
please keep it full. Then cover it.
Ÿ
if you want to add more cooled liquid, starter the engine
liquid rising 80℃,waiting for 5minuts thenopen the cover
again1,till the liquid full, close the cover.
Ÿ
Following the above number, you can add the liquid
for three times.
Ÿ
Or you can open the cover 2 to immit the liquid after the
engine is cooled.
Warning:
When the engine is high temperature, not open the cover, in
case the liquid burst out to injury the body.
1
Fig 30
2
Fig31
- 28 -
Ⅶ.Vehicle identification
Vehicle model, VIN and engine number of the motorcycle(Fig32)
When the motorcyle are registered or getting the license from the transport department, the
owner should be send the VIN number and engine number。The maintain people change
the parts, need the numbers too.。
The products brand should be added at the right side plate of the main stand(see page 5)
Fig32