WANHAO Duplicator 5 User Manual - page 11
of
18
7. After adjusting the height at
your first position, click the rotary dial
and follow the same procedure for the
next two nozzle height check positions.
8. After you adjust the wingnut in the third
height check position, your build plate
will be properly calibrated.
6. To raise and lower your build plate,
look underneath the platform for
three seperate wingnuts. Adjust only
the wingnut underneath your current
nozzle position. To raise the
platform, turn the wingnut counter-
clockwise. To lower the platform,
turn it clockwise.
5. Slide a name card (or a sheet of
copy paper) in between the nozzle
and the build plate. You will want the
sheet of paper to slide back and forth
with no or minimal friction.
Calibrating the Build Plate (continued)
8