WANHAO Duplicator 5S User Manual - page 10
Other manuals for Duplicator 5S:
User Manual
Manual is about: Desktop 3D Printer
of
14
7.Navigate to Step2, 3 and 4
6
How to level the buling plate
1. Navigate the Rotate button and push
the button
2. Navigate the Rotate button to utility
and Push the button
3. Navigate to Calibrate plate and push
the button
4.Prepare a name card, Wait untilauto-
homing f inshed
5.Push the button and adjust nut below
the plate
6.Insert one name card between the
nozzle and plate(0.1mm thick)
8.Adjust the rest 2 nuts and ensure name
card can go through