WANHAO Duplicator i3 User Manual - page 2
WARNING
: The components on the Duplicator i3 generate high temperatures and move
extremely fast. Reaching inside of the Duplicator i3 while it is in operation may cause injury.
Stay clear of the printer frame perimeter while the machine is in operation. Always control the
Duplicator i3 from the rotary dial on the front of the printer or
via the computer software
. Never
push or pull any of the components by hand. After a print, make sure your printer is off and that
your nozzle is no longer hot before removing
a model
from the printer.
CAUTION
: When opening the Duplicator i3 for service, ensure that the power supply is
turned off and the power cord is disconnected from the wall socket. Failure to do so can
result in electrical shock.
CAUTION
: Only use the stock power supply provided with your Duplicator i3.
WARNING
:
The Duplicator i3 is a
h
eavy machine and extra caution is advised when
lifting/moving the printer. Failure to properly lift/move the printer can result in injury.
Safety