Half gallon hi-power blender mx1000r instruction booklet.
Important unpacking instructions 1. Place the box containing your waring pro ® blender on a flat sturdy surface before unpacking. 2. Open corrugated flaps. 3. Remove instruction book and any printed materials from top of box. 4. Pull up corrugated material and remove. Remove jar and padding. Caution...
10. Keep hands and utensils out of container while blending to prevent the possibility of severe personal injury and/or damage to the blender. A rubber scraper may be used, but must be used only when the blender is not running. 11. Blades are sharp. Handle carefully. 12. Always operate blender with ...
Grounding instructions • for your protection, this appliance is equipped with a 3-conductor cord set. • 120 volt units are supplied with a molded 3-prong grounding-type plug (nema 5-15p) and should be used in combination with a properly connected grounding-type outlet as shown in figure 1. If a grou...
7. Allow motor to come to a complete stop before removing container from blender base. Never place the container on the motor base or remove it from the motor base while motor is running. 8. Always hold container with one hand when starting and while blending. Never operate without container lid. 9....
• in repetitive batch-processing applications, frequent cleaning of the container will prolong the life of the blade assembly. In no case should actual running time between cleanings exceed 1/2 hour. • do not use container to store processed foods or beverages. To wash and rinse container: 1. Remove...
Www.Waringproducts.Com pg-5378 waring consumer products division of conair corporation 150 milford rd east windsor nj 08520 027302 printed in usa 08wr200
