Half gallon hi-power blender mx1000r instruction booklet.
Important unpacking instructions 1. Place the box containing your waring pro ® blender on a flat sturdy surface before unpacking. 2. Open corrugated flaps. 3. Remove instruction book and any printed materials from top of box. 4. Pull up corrugation and remove. Remove jar and padding. Caution: sharp ...
8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or touch hot surfaces. 10. Keep hands and utensils out of container while blending, to prevent the possibility of severe personal injury and/or damage to the blender. A rubber scraper may be used, but must be used only wh...
Grounding instructions • for your protection, this appliance is equipped with a 3-conductor cord set. • 120 volt units are supplied with a molded 3-prong grounding-type plug (nema 5-15p) and should be used in combination with a properly connected grounding type outlet as shown in figure a. If a grou...
7. Allow motor to come to a complete stop before removing container from blender base. Never place the container on the motor base or remove it from the motor base while motor is running. 8. Always hold container with one hand when starting and while blending. Never operate without jar lid. 9. Wash ...
• in repetitive batch-processing applications, frequent cleaning of the container will prolong the life of the blade assembly. In no case should actual running time between cleanings exceed 1/2 hour. • do not use container to store processed foods or beverages. To wash and rinse container: 1. Remove...
Notes ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ______________________________________________________...
©2010 waring consumer products 150 milford road east windsor, nj 08520 www.Waringpro.Com any other trademarks or service marks of third parties referred to herein are the trademarks or service marks of their respective owners. Printed in usa rv01 1006 mx1000r ib 10wr117069 237302.
