Waring WCG75 – Pro Prep Operating And Cleaning Instructions - For Commercial Use Operation
For Commercial Use Operation
1) Put base on counter near electrical outlet. Do not plug in until the
Pro Prep
™
Chopper Grinder is totally assembled.
2) Put empty work bowl (either grinding or chopping) on base, fitting center
tube over shaft on base and place handle slightly to left of front center
(7 o’clock).
3) Hold bowl by handle and turn bowl counterclockwise until unit locks
in place.
4) Pick up metal blade by center plastic hub. Never touch metal cutting
blades. Place blade over motor shaft, twisting gently until it drops in
place over shaft.
5) NOTE: You must use the designated processing blades with the
designated work bowl (chopping blade with chopping bowl or
grinding blade with grinding bowl). Using the Pro Prep in any other
way will damage the unit and may result in injury.
6) Add ingredients (see table below for recommend amounts). Cut larger
food items into a 1" (2cm) cube before processing.
7) Place cover on work bowl. Motor will not start unless work bowl is
securely locked in position and cover is securely locked on work bowl.
Turn cover in direction of arrow to lock.
8) With the power switch in OFF position, plug into power outlet.
Set power switch to ON or PULSE position.
9) When finished processing, set power switch to OFF position.
10) Allow motor to come to a complete stop and always unplug before
removing lid and/or work bowl.
Processing Quantity Guideline
FOOD
AMOUNT
BLADE/BOWL
Garlic cloves, whole
4 oz.
Chopping
Onions, in 1" cubes
5 oz.
Chopping
Fresh Basil leaves
1 oz.
Chopping
Fresh Curly Parsley, stems removed
1 oz.
Chopping
Fresh Thyme, leaves and stems
1/4 oz.
Chopping
Fresh Rosemary, big stems removed
1 oz.
Chopping
Imported Parmesan/Romano
2-4 oz.
Chopping
Walnut halves
5 oz.
Chopping
Whole Chocolate (1 oz. squares)
2 oz.
Chopping
Whole Peppercorns
1 1/4 oz.
Grinding
Whole Mustard Seed
1 1/2 oz.
Grinding
Whole Celery Seed
1 1/4 oz.
Grinding
Whole Coffee Bean
1 oz.
Grinding
Whole Cloves
1 1/4 oz.
Grinding
IMPORTANT:
This appliance is not designed or intended to process meats.
NOTE:
This table only to be used as a guideline. Actual quantities may vary.